Added screenshots module

README.org

@@ -1,93 +1,13 @@
-* Installing
+* NixOS
-
+** [[file:docs/install.org][Installing]]
-** Fresh system (nixos USB drive)
+*** Rebuilding
-
-1. Open a nix-shell with git:
 #+BEGIN_SRC bash
-nix-shell -p git
+sudo nixos-rebuild switch --impure --flake ".#${HOST}"
-#+END_SRC
-
-1. Clone the flake
-#+BEGIN_SRC bash
-git clone https://git.lajuntament.space/marc/samfelag.git
-#+END_SRC
-
-1. Partition the disk
-  1. Locate the disk
-  #+BEGIN_SRC bash
-  lsblk
-  #+END_SRC
-
-  1. Create a GPT partition table
-  #+BEGIN_SRC bash
-  sudo parted /dev/nvme0n1 -- mklabel gpt
-  #+END_SRC
-
-  1. Create the root partition
-  #+BEGIN_SRC bash
-  sudo parted /dev/nvme0n1 -- mkpart primary 512MB -8GB
-  #+END_SRC
-
-  1. Create the swap partition
-  #+BEGIN_SRC bash
-  sudo parted /dev/nvme0n1 -- mkpart primary linux-swap -8GB 100%
-  #+END_SRC
-
-  1. Create the boot partition
-  #+BEGIN_SRC bash
-  sudo parted /dev/nvme0n1 -- mkpart ESP fat32 1MB 512MB
-  sudo parted /dev/nvme0n1 -- set 3 esp on
-  #+END_SRC
-
-1. Format the partitions
-  1. Root partition
-  #+BEGIN_SRC bash
-  sudo mkfs.ext4 -L nixos /dev/nvme0n1p1
-  #+END_SRC
-  
-  1. Swap partition
-  #+BEGIN_SRC bash
-  sudo mkswap -L swap /dev/nvme0n1p2
-  #+END_SRC
-
-  1. Boot partition
-  #+BEGIN_SRC bash
-  sudo mkfs.fat -F 32 -n BOOT /dev/nvme0n1p3
-  #+END_SRC
-
-1. Mount the filesystems
-  1. Root partition
-  #+BEGIN_SRC bash
-  sudo mount /dev/disk/by-label/nixos /mnt
-  #+END_SRC
-  
-  1. Boot partition
-  #+BEGIN_SRC bash
-  sudo mkdir -p /mnt/boot
-  sudo mount /dev/disk/by-label/BOOT /mnt/boot
-  #+END_SRC
-
-  1. Swap partition (if needed)
-  #+BEGIN_SRC bash
-  sudo swapon /dev/disk/by-label/swap
-  #+END_SRC
-
-1. Create the host nix configuration
-If the host is not present under system/hosts, create a new folder for the host.
-Generate the hardware configuration file, you can use nixos-generate-config as a base:
-
-#+BEGIN_SRC bash
-nixos-generate-config --dir <<host directory>> --no-filesystems
-#+END_SRC
-
-1. Install nixos!
-
-#+BEGIN_SRC bash
-sudo nixos-install --impure --root /mnt --flake .#reykjavik
-#+END_SRC
-
-1. Set up the user
-You'll set the root password during the installation. You can then reboot and use the installed OS. First thing you'll have to do is log in as root and set the password for your user:
-#+BEGIN_SRC bash
-passwd marc
 #+END_SRC
+** Modules
+*** Desktop environment
+**** Themeing
+We use [[https://github.com/Misterio77/nix-colors][nix-colors]] to (try to) keep a consistent theme across all applications. This uses [[https://github.com/chriskempson/base16][base-16 themes]] (here is a [[https://github.com/chriskempson/base16/blob/main/styling.md][styiling guide]] for it).
+* Samfelag Mesh
+** [[file:docs/hosts.org][Hosts]]
+** [[file:docs/consul.org][Consul]]

config/.config/alacritty/alacritty.yml

@@ -1,7 +0,0 @@
-window:
-  opacity: 0.85
-font:
-  size: 8
-  normal:
-    family: Iosevka Nerd Font
-    style: Regular

config/.config/polybar/bars/bars.ini

@@ -1,51 +0,0 @@
-include-file = colours.ini
-include-directory = modules
-
-[bar/base]
-dpi      = 96
-width    = 100%
-height   = 32
-offset-x = 0
-offset-y = 0
-
-font-0 = "Iosevka:size=10;2"
-font-1 = "Iosevka:size=16;2"
-font-2 = "Iosevka:size=22;4"
-
-background = ${colours.trans}
-foreground = ${colours.white}
-
-border-bottom-size  = 5
-border-top-size     = 5
-
-border-left-size  = 10
-border-right-size = 10
-
-border-bottom-colour = ${colours.trans}
-border-top-colour    = ${colours.trans}
-
-border-left-colour  = ${colours.trans}
-border-right-colour = ${colours.trans}
-
-spacing            = 0
-padding-left       = 0
-padding-right      = 0
-module-margin-left = 0
-
-[bar/bottom]
-inherit = bar/base
-bottom = true
-
-modules-left  = workspaces 
-modules-right = volume paddinglite battery
-
-tray-position = center
-tray-maxsize = 28
-
-[bar/top]
-inherit = bar/base
-bottom = false
-
-modules-left  =  
-modules-center = date
-modules-right = i3-mode

config/.config/polybar/bars/colours.ini

@@ -1,61 +0,0 @@
-[colours]
-trans = #0000
-white = #fff
-black = #000
-gray = #555
-
-blue- = #498AD4
-blue  = #2B6CB6
-blue+ = #173B63
-
-xanadu- = #B3BCB6
-xanadu  = #808F85
-xanadu+ = #606C64
-
-green- = #CAE2CE
-green  = #91C499
-green+ = #61A86D
-
-linen- = #F9F5F0
-linen  = #F2E9DC
-linen+ = #DEC6A6
-
-pear- = #E8EB5C
-pear  = #CFD11A
-pear+ = #8F9112
-
-orange- = #FEB548
-orange  = #F18F01
-orange+ = #A26201
-
-[colours/date]
-bg = ${colours.pear}
-fg = ${colours.gray}
-
-[colours/battery]
-full-bg = ${colours.green+}
-full-fg = ${colours.gray} 
-charging-bg = ${colours.green}
-charging-fg = ${colours.gray} 
-discharging-bg = ${colours.green}
-discharging-fg = ${colours.gray} 
-low-bg = ${colours.orange}
-low-fg = ${colours.gray} 
-
-[colours/workspaces]
-focused-bg = ${colours.linen+}
-focused-fg = ${colours.gray}
-unfocused-bg = ${colours.linen}
-unfocused-fg = ${colours.gray}
-urgent-bg = ${colours.orange-}
-urgent-fg = ${colours.gray}
-
-[colours/i3-mode]
-bg = ${colours.orange}
-fg = ${colours.gray}
-
-[colours/volume]
-volume-bg = ${colours.blue}
-volume-fg = ${colours.white}
-muted-bg = ${colours.blue-}
-muted-fg = ${colours.white}

config/.config/polybar/bars/modules/padding.ini

@@ -1,13 +0,0 @@
-[module/padding]
-type               = custom/text
-content            = ||
-content-padding    = 1
-content-foreground = ${colours.trans}
-content-background = ${colours.trans}
-
-[module/paddinglite]
-type               = custom/text
-content            = |
-content-padding    = .5
-content-foreground = ${colours.trans}
-content-background = ${colours.trans}

config/.config/polybar/config.ini

@@ -1 +0,0 @@
-include-file = bars/bars.ini

config/alacritty/alacritty.toml

@@ -0,0 +1,12 @@
+[general]
+import = ["~/.config/alacritty/theme.toml"]
+
+[font]
+size = 12
+
+[font.normal]
+family = "Iosevka Nerd Font"
+style = "Regular"
+
+[window]
+opacity = 0.85

config/consul.d/client.json

@@ -0,0 +1,15 @@
+{
+  "tls": {
+    "defaults": {
+      "verify_incoming": false,
+      "verify_outgoing": true,
+      "ca_file": "/etc/consul.d/certs/consul-agent-ca.pem"
+    },
+    "internal_rpc": {
+      "verify_server_hostname": true
+    }
+  },
+  "auto_encrypt": {
+      "tls": true
+  }
+}

config/consul.d/common.json

@@ -0,0 +1,25 @@
+{
+  "datacenter": "samfelag",
+
+  "bind_addr": "{{ GetInterfaceIP \"tailscale0\" }}",
+  "advertise_addr": "{{ GetInterfaceIP \"tailscale0\" }}",
+  "client_addr": "{{ GetInterfaceIP \"tailscale0\" }} 127.0.0.1",
+
+  "ports": {
+    "grpc_tls": 8502
+  },
+
+  "acl": {
+    "enabled": true,
+    "default_policy": "allow",
+    "enable_token_persistence": true
+  },
+
+  "connect": {
+    "enabled": true
+  },
+
+  "performance": {
+    "raft_multiplier": 1
+  }
+}

config/consul.d/server-list.json

@@ -0,0 +1,5 @@
+{
+  "retry_join": [
+      "100.99.167.21"
+  ]
+}

config/consul.d/server.json

@@ -0,0 +1,22 @@
+{
+  "server": true,
+  "bootstrap_expect": 1,
+  "ui_config": {
+    "enabled": true
+  },
+  "tls": {
+    "defaults": {
+      "verify_incoming": true,
+      "verify_outgoing": true,
+      "ca_file": "/etc/consul.d/certs/consul-agent-ca.pem",
+      "cert_file": "/etc/consul.d/certs/samfelag-server-consul.pem",
+      "key_file": "/etc/consul.d/certs/samfelag-server-consul-key.pem"
+    },
+    "internal_rpc": {
+      "verify_server_hostname": true
+    }
+  },
+  "auto_encrypt": {
+      "allow_tls": true
+  }
+}

config/doom/config.el

@@ -1,37 +1,32 @@
 ;;; $DOOMDIR/config.el -*- lexical-binding: t; -*-
 
-;; Place your private configuration here! Remember, you do not need to run 'doom
-;; sync' after modifying this file!
-
-
 ;; Some functionality uses this to identify you, e.g. GPG configuration, email
 ;; clients, file templates and snippets.
 (setq user-full-name "Marc Sastre Rienitz"
       user-mail-address "marc@sastre.cat")
 
-;; Doom exposes five (optional) variables for controlling fonts in Doom. Here
-;; are the three important ones:
-;;
-;; + `doom-font'
-;; + `doom-variable-pitch-font'
-;; + `doom-big-font' -- used for `doom-big-font-mode'; use this for
-;;   presentations or streaming.
-;;
-;; They all accept either a font-spec, font string ("Input Mono-12"), or xlfd
-;; font string. You generally only need these two:
-;; (setq doom-font (font-spec :family "monospace" :size 12 :weight 'semi-light)
-;;       doom-variable-pitch-font (font-spec :family "sans" :size 13))
-(setq doom-font (font-spec :family "Iosevka" :size 15))
-
-;; There are two ways to load a theme. Both assume the theme is installed and
-;; available. You can either set `doom-theme' or manually load a theme with the
-;; `load-theme' function. This is the default:
-(setq doom-theme 'doom-zenburn)
-
 ;; This determines the style of line numbers in effect. If set to `nil', line
 ;; numbers are disabled. For relative line numbers, set this to `relative'.
 (setq display-line-numbers-type t)
 
+;; Fonts
+(setq doom-font (font-spec :family "Iosevka Nerd Font" :size 18))
+(setq doom-symbol-font (font-spec :family "Iosevka Nerd Font" :size 18))
+(setq doom-emoji-font (font-spec :family "Noto Color Emoji" :size 18))
+
+;; Themeing
+(use-package base16-theme
+  :init (add-to-list 'custom-theme-load-path "~/.config/doom/themes")
+  :ensure t
+  :config
+  (load-theme 'base16-samfelag t))
+;; (after! doom-themes
+;;   (load-theme 'doom-nano-dark t))
+
+;; (use-package! doom-nano-modeline
+;;   :config
+;;   (doom-nano-modeline-mode 1)
+;;   (global-hide-mode-line-mode 1))
 
 ;; Here are some additional functions/macros that could help you configure Doom:
 ;;
@@ -54,6 +49,18 @@
 
 (setq-default tab-width 4)
 
+;; -----------------------------------------------------------------------------
+;; Emojify
+;; -----------------------------------------------------------------------------
+(use-package! emojify
+  :config
+  (when (member "Noto Color Emoji" (font-family-list))
+    (set-fontset-font
+     t 'emoji (font-spec :family "Noto Color Emoji") nil 'prepend))
+  (setq emojify-display-style 'image)
+  (setq emojify-emoji-styles '(unicode)))
+
+
 ;; -----------------------------------------------------------------------------
 ;; Projectile
 ;; -----------------------------------------------------------------------------
@@ -67,7 +74,7 @@
 ;; -----------------------------------------------------------------------------
 (use-package vterm
   :config
-  (setq vterm-shell "fish"))
+  (setq vterm-shell "zsh"))
 
 
 ;; -----------------------------------------------------------------------------
@@ -76,6 +83,20 @@
 (use-package parinfer
   :defer t)
 
+
+;; -----------------------------------------------------------------------------
+;; LSP
+;; -----------------------------------------------------------------------------
+;; (use-package lsp-mode
+;;   :init
+;;   :hook (;;
+;;          (clojure-mode . lsp-deferred)
+;;          (python-mode . lsp-deferred)
+;;          ;; if you want which-key integration
+;;          (lsp-mode . lsp-enable-which-key-integration))
+;;   :commands (lsp lsp-deferred))
+
+
 ;; -----------------------------------------------------------------------------
 ;; Python
 ;; -----------------------------------------------------------------------------
@@ -93,122 +114,49 @@
   :config
   (setq py-autopep8-options '("--max-line-length=120")))
 
-
 (use-package pipenv
   :config
   (setq pipenv-with-projectile t)
   (setenv "PIPENV_MAX_DEPTH" "10"))
 
+;; -----------------------------------------------------------------------------
+;; Web (HTML + CSS)
+;; -----------------------------------------------------------------------------
+;; (use-package! lsp-tailwindcss)
 
 ;; -----------------------------------------------------------------------------
 ;; Org
 ;; -----------------------------------------------------------------------------
-
+(setq org-directory "~/org")
-(setq org-directory "~/org/")
+(setq org-agenda-files (directory-files-recursively "~/org/agenda" "\\.org$"))
-
-(defun org-set-trello-mode ()
-  (let ((filename (buffer-file-name (current-buffer))))
-    (when (and filename (string= "trello" (file-name-extension filename)))
-      (org-trello-mode))))
-
-(use-package org
-  :config
-  (add-to-list 'auto-mode-alist '("\\.trello$" . org-mode))
-  (add-hook! 'org-mode-hook 'org-set-trello-mode))
-  
-
-(use-package org-roam
-  :ensure t
-  :init
-  (setq org-roam-v2-ack t)
-  :custom
-  (org-roam-directory "~/org-roam")
-  (org-roam-capture-templates
-   '(("d" "default" plain "%?"
-      :target (file+head "%<%Y%m%d%H%M%S>-${slug}.org" "#+title: ${title}\n")
-      :unnarrowed t)
-     ("m" "màquina" plain (file "~/org-roam/templates/maquina.org")
-       :target (file "%<%Y%m%d%H%M%S>-${slug}.org")
-       :unnarrowed t)
-     ("s" "software" plain (file "~/org-roam/templates/software.org")
-       :target (file "%<%Y%m%d%H%M%S>-${slug}.org")
-       :unnarrowed t)))
-  :config
-  (org-roam-setup))
-
-(use-package org-trello
-  :config
-  ;; (setq org-trello-current-prefix-keybinding "SPC r")
-  (defun org-trello-bindings ()
-    "Set the keybindings for org-trello mode"
-    (defun set-key (key fn)
-      (evil-define-key* 'normal org-trello-mode-map
-        (kbd (concat  "SPC r" " " key)) fn))
-    (set-key "v" 'org-trello-version)
-    (set-key "i" 'org-trello-install-key-and-token)
-    (set-key "I" 'org-trello-install-board-metadata)
-    (set-key "c" 'org-trello-sync-card)
-    (set-key "s" 'org-trello-sync-buffer)
-    (set-key "a" 'org-trello-assign-me)
-    (set-key "d" 'org-trello-check-setup)
-    (set-key "D" 'org-trello-delete-setup)
-    (set-key "b" 'org-trello-create-board-and-install-metadata)
-    (set-key "k" 'org-trello-kill-entity)
-    (set-key "K" 'org-trello-kill-cards)
-    (set-key "a" 'org-trello-archive-card)
-    (set-key "A" 'org-trello-archive-cards)
-    (set-key "j" 'org-trello-jump-to-trello-card)
-    (set-key "J" 'org-trello-jump-to-trello-board)
-    (set-key "C" 'org-trello-add-card-comments)
-    (set-key "o" 'org-trello-show-card-comments)
-    (set-key "l" 'org-trello-show-card-labels)
-    (set-key "u" 'org-trello-update-board-metadata)
-    (set-key "h" 'org-trello-help-describing-bindings))
-    
-  (add-hook! 'org-trello-mode-hook 'org-trello-bindings))
-
-(use-package! websocket
-    :after org-roam)
-
-(use-package! org-roam-ui
-    :after org-roam ;; or :after org
-;;         normally we'd recommend hooking orui after org-roam, but since org-roam does not have
-;;         a hookable mode anymore, you're advised to pick something yourself
-;;         if you don't care about startup time, use
-;;  :hook (after-init . org-roam-ui-mode)
-    :config
-    (setq org-roam-ui-sync-theme t
-          org-roam-ui-follow t
-          org-roam-ui-update-on-save t
-          org-roam-ui-open-on-start nil))
 
 
 ;; -----------------------------------------------------------------------------
-;; Lilypond
+;; Agenix
 ;; -----------------------------------------------------------------------------
+(load! "modules/agenix.el")
+(setq agenix-age-program "age")
+(setq agenix-agenix-program "agenix")
 
-(load-library "lilypond-mode")
-(add-to-list 'auto-mode-alist '("\\.ly$" . LilyPond-mode))
 
 ;; -----------------------------------------------------------------------------
 ;; Appearance - Prettify
 ;; -----------------------------------------------------------------------------
-(load! "prettify-utils.el")
+(load! "modules/prettify-utils.el")
 
 (pretty-hook python-mode
-  ;; ("def" "𝙛")
+  ("def" " 󰊕 ")
-  ;; ("class" "𝙘")
+  ("class" "𝙘")
   ("None" "∅")
   ("lambda" "λ")
   ("not in" "∉")
   ("in" "∈"))
 
 
+
 (pretty-hook emacs-lisp-mode)
   ;; ("defun" "𝙛")
 
-
+;; (pretty-hook org-mode
-(pretty-hook org-mode
+;;   ("[ ]" "☐")
-  ("[ ]" "☐")
+;;   ("[X]" "☑"))
-  ("[X]" "☑"))
-

config/doom/init.el

@@ -30,20 +30,21 @@
        doom              ; what makes DOOM look the way it does
        doom-dashboard    ; a nifty splash screen for Emacs
        ;; doom-quit         ; DOOM quit-message prompts when you quit Emacs
-       ;;(emoji +unicode)  ; 🙂
+       (emoji +unicode)  ; 🙂
-       fill-column       ; a `fill-column' indicator
+       ;; fill-column       ; a `fill-column' indicator
        hl-todo           ; highlight TODO/FIXME/NOTE/DEPRECATED/HACK/REVIEW
        ;;hydra
        ;;indent-guides     ; highlighted indent columns
-       (ligatures +iosevka)         ; ligatures and symbols to make your code pretty again
+       (ligatures
+        +iosevka)         ; ligatures and symbols to make your code pretty again
        ;;minimap           ; show a map of the code on the side
-       modeline          ; snazzy, Atom-inspired modeline, plus API
+       ;;modeline          ; snazzy, Atom-inspired modeline, plus API
        ;;nav-flash         ; blink cursor line after big motions
-       neotree           ; a project drawer, like NERDTree for vim
+       ;;neotree           ; a project drawer, like NERDTree for vim
        ophints           ; highlight the region an operation acts on
        (popup +defaults)   ; tame sudden yet inevitable temporary windows
        ;;tabs              ; a tab bar for Emacs
-       ;;treemacs          ; a project drawer, like neotree but cooler
+       treemacs          ; a project drawer, like neotree but cooler
        unicode           ; extended unicode support for various languages
        vc-gutter         ; vcs diff in the fringe
        vi-tilde-fringe   ; fringe tildes to mark beyond EOB
@@ -86,14 +87,14 @@
        :tools
        ;;ansible
        ;;debugger          ; FIXME stepping through code, to help you add bugs
-       ;;direnv
+       direnv
        ;;docker
        ;;editorconfig      ; let someone else argue about tabs vs spaces
        ;;ein               ; tame Jupyter notebooks with emacs
        (eval +overlay)     ; run code, run (also, repls)
        ;;gist              ; interacting with github gists
        lookup              ; navigate your code and its documentation
-       ;;lsp
+       (lsp +eglot)
        magit             ; a git porcelain for Emacs
        ;;make              ; run make tasks from Emacs
        ;;pass              ; password manager for nerds
@@ -112,7 +113,8 @@
        :lang
        ;;agda              ; types of types of types of types...
        ;;cc                ; C/C++/Obj-C madness
-       clojure           ; java with a lisp
+       (clojure
+        +lsp)              ; java with a lisp
        ;;common-lisp       ; if you've seen one lisp, you've seen them all
        ;;coq               ; proofs-as-programs
        ;;crystal           ; ruby at the speed of c
@@ -144,23 +146,24 @@
        ;;lua               ; one-based indices? one-based indices
        markdown          ; writing docs for people to ignore
        ;;nim               ; python + lisp at the speed of c
-       ;;nix               ; I hereby declare "nix geht mehr!"
+       nix               ; I hereby declare "nix geht mehr!"
        ;;ocaml             ; an objective camel
        (org
         +journal
-        +roam2
         +pretty)           ; organize your plain life in plain text
        php               ; perl's insecure younger brother
        ;;plantuml          ; diagrams for confusing people more
        ;;purescript        ; javascript, but functional
-       python            ; beautiful is better than ugly
+       (python
+        +lsp)          ; beautiful is better than ugly
        ;;qt                ; the 'cutest' gui framework ever
        ;;racket            ; a DSL for DSLs
        ;;raku              ; the artist formerly known as perl6
        rest              ; Emacs as a REST client
        ;;rst               ; ReST in peace
        ;;(ruby +rails)     ; 1.step {|i| p "Ruby is #{i.even? ? 'love' : 'life'}"}
-       ;;rust              ; Fe2O3.unwrap().unwrap().unwrap().unwrap()
+       (rust
+        +lsp)              ; Fe2O3.unwrap().unwrap().unwrap().unwrap()
        ;;scala             ; java, but good
        ;;scheme            ; a fully conniving family of lisps
        sh                ; she sells {ba,z,fi}sh shells on the C xor

config/doom/modules/agenix.el

@@ -0,0 +1,231 @@
+;;; agenix.el --- Decrypt and encrypt agenix secrets  -*- lexical-binding: t -*-
+
+;; Copyright (C) 2022-2023 Tomasz Maciosowski (t4ccer)
+
+;; Author: Tomasz Maciosowski <t4ccer@gmail.com>
+;; Maintainer: Tomasz Maciosowski <t4ccer@gmail.com>
+;; Package-Requires: ((emacs "27.1"))
+;; URL: https://github.com/t4ccer/agenix.el
+;; Version: 1.0
+;;
+;; Modified version by Marc Sastre that allows subdirectories in the secrets folder.
+
+;; This file is NOT part of GNU Emacs.
+
+;; This program is free software; you can redistribute it and/or modify
+;; it under the terms of the GNU General Public License as published by
+;; the Free Software Foundation, either version 3 of the License, or
+;; (at your option) any later version.
+
+;; This program is distributed in the hope that it will be useful,
+;; but WITHOUT ANY WARRANTY; without even the implied warranty of
+;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+;; GNU General Public License for more details.
+
+;; You should have received a copy of the GNU General Public License
+;; along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+;;; Commentary:
+
+;; Fully transparent editing of agenix secrets. Open a file, edit it, save it and it will be
+;; encrypted automatically.
+
+;;; Code:
+
+(defcustom agenix-age-program "age"
+  "The age program."
+  :group 'agenix
+  :type 'string)
+
+(defcustom agenix-key-files '("~/.ssh/id_ed25519" "~/.ssh/id_rsa")
+  "List of age key files."
+  :group 'agenix
+  :type '(repeat string))
+
+(defcustom agenix-pre-mode-hook nil
+  "Hook to run before entering `agenix-mode'.
+Can be used to set up age binary path."
+  :group 'agenix
+  :type 'hook)
+
+(defvar-local agenix--encrypted-fp nil)
+
+(defvar-local agenix--keys nil)
+
+(defvar-local agenix--undo-list nil)
+
+(defvar-local agenix--point nil)
+
+(define-derived-mode agenix-mode text-mode "agenix"
+  "Major mode for agenix files.
+Don't use directly, use `agenix-mode-if-with-secrets-nix' to ensure that
+secrets.nix exists."
+  (read-only-mode 1)
+
+  (run-hooks 'agenix-pre-mode-hook)
+
+  (agenix-decrypt-buffer)
+  (goto-char (point-min))
+  (setq buffer-undo-list nil)
+
+  (setq require-final-newline nil)
+  (setq buffer-auto-save-file-name nil)
+  (setq write-contents-functions '(agenix-save-decrypted))
+
+  ;; Reverting loads encrypted file back to the buffer, so we need to decrypt it
+  (add-hook 'after-revert-hook
+            (lambda () (when (eq major-mode 'agenix-mode) (agenix-decrypt-buffer)))))
+
+
+(defun agenix--file-search-upward (directory file)
+  "Search DIRECTORY for FILE and return its full path if found, or NIL if not.
+
+If FILE is not found in DIRECTORY, the parent of DIRECTORY will be searched."
+  (let ((parent-dir (file-truename (concat (file-name-directory directory) "../")))
+        (current-path (if (not (string= (substring directory (- (length directory) 1)) "/"))
+                         (concat directory "/" file)
+                         (concat directory file))))
+    (if (file-exists-p current-path)
+        current-path
+        (when (and (not (string= (file-truename directory) parent-dir))
+                   (< (length parent-dir) (length (file-truename directory))))
+          (agenix--file-search-upward parent-dir file)))))
+
+(defun agenix--secrets-nix-path ()
+  "Search for secrets.nix file in the current directory or any parent directory.
+Return it if found"
+ (agenix--file-search-upward "./" "secrets.nix"))
+
+(defun agenix--relative-buffer-path ()
+  "Return the filename of the current buffer relative to the secrets.nix path."
+  (file-relative-name
+   (buffer-file-name)
+   (file-name-directory (agenix--secrets-nix-path))))
+
+(defun agenix--buffer-string* (buffer)
+  "Like `buffer-string' but read from BUFFER parameter."
+  (with-current-buffer buffer
+    (buffer-substring-no-properties (point-min) (point-max))))
+
+(defun agenix--with-temp-buffer (func)
+  "Like `with-temp-buffer' but doesn't actually switch the buffer.
+FUNC takes a temporary buffer that will be disposed after the call."
+  (let* ((age-buf (generate-new-buffer "*age-buf*"))
+         (res (funcall func age-buf)))
+    (kill-buffer age-buf)
+    res))
+
+(defun agenix--process-exit-code-and-output (program &rest args)
+  "Run PROGRAM with ARGS and return the exit code and output in a list."
+  (agenix--with-temp-buffer
+   (lambda (buf) (list (apply #'call-process program nil buf nil args)
+                       (agenix--buffer-string* buf)))))
+
+;;;###autoload
+(defun agenix-decrypt-buffer (&optional encrypted-buffer)
+  "Decrypt ENCRYPTED-BUFFER in place.
+If ENCRYPTED-BUFFER is unset or nil, decrypt the current buffer."
+  (interactive
+   (when current-prefix-arg
+     (list (read-buffer "Encrypted buffer: " (current-buffer) t))))
+
+  (with-current-buffer (or encrypted-buffer (current-buffer))
+    (let* ((nix-res (apply #'agenix--process-exit-code-and-output "nix-instantiate"
+                           (list "--strict" "--json" "--eval" "--expr"
+                                 (format
+                                  "(import %s).\"%s\".publicKeys"
+                                  (agenix--secrets-nix-path)
+                                  (agenix--relative-buffer-path)))))
+           (nix-exit-code (car nix-res))
+           (nix-output (car (cdr nix-res))))
+
+      (if (/= nix-exit-code 0)
+          (warn "Nix evaluation error.
+Probably file %s is not declared as a secret in 'secrets.nix' file.
+Error: %s" (buffer-file-name) nix-output)
+        (let* ((keys (json-parse-string nix-output :array-type 'list))
+               (age-flags (list "--decrypt")))
+
+          ;; Add all user's keys to the age command
+          (dolist (key-path agenix-key-files)
+            (when (file-exists-p (expand-file-name key-path))
+              (setq age-flags
+                    (nconc age-flags (list "--identity" (expand-file-name key-path))))))
+
+          ;; Add file-path to decrypt to the age command
+          (setq age-flags (nconc age-flags (list (buffer-file-name))))
+          (setq agenix--encrypted-fp (buffer-file-name))
+          (setq agenix--keys keys)
+
+          ;; Check if file already exists
+          (if (not (file-exists-p (buffer-file-name)))
+              (progn
+                (message "Not decrypting. File %s does not exist and will be created when you \
+will save this buffer." (buffer-file-name))
+                (read-only-mode -1))
+            (let*
+                ((age-res
+                  (apply #'agenix--process-exit-code-and-output agenix-age-program age-flags))
+                 (age-exit-code (car age-res))
+                 (age-output (car (cdr age-res))))
+
+              (if (= 0 age-exit-code)
+                  (progn
+                    ;; Replace buffer with decrypted content
+                    (read-only-mode -1)
+                    (erase-buffer)
+                    (insert age-output)
+
+                    ;; Mark buffer as not modified
+                    (set-buffer-modified-p nil)
+                    (setq buffer-undo-list agenix--undo-list))
+                (error age-output))))
+          (when agenix--point
+            (goto-char agenix--point)))))))
+
+;;;###autoload
+(defun agenix-save-decrypted (&optional unencrypted-buffer)
+  "Encrypt UNENCRYPTED-BUFFER back to the original .age file.
+If UNENCRYPTED-BUFFER is unset or nil, use the current buffer."
+  (interactive
+   (when current-prefix-arg
+     (list (read-buffer "Unencrypted buffer: " (current-buffer) t))))
+  (with-current-buffer (or unencrypted-buffer (current-buffer))
+    (let* ((age-flags (list "--encrypt")))
+      (progn
+        (dolist (k agenix--keys)
+          (setq age-flags (nconc age-flags (list "--recipient" k))))
+        (setq age-flags (nconc age-flags (list "-o" agenix--encrypted-fp)))
+        (let* ((decrypted-text (buffer-string))
+               (age-res
+                (agenix--with-temp-buffer
+                 (lambda (buf)
+                   (list
+                    (apply #'call-process-region
+                           decrypted-text nil
+                           agenix-age-program
+                           nil
+                           buf
+                           t
+                           age-flags)
+                    (agenix--buffer-string* buf))))))
+          (when (/= 0 (car age-res))
+            (error (car (cdr age-res))))
+          (setq agenix--point (point))
+          (setq agenix--undo-list buffer-undo-list)
+          (revert-buffer :ignore-auto :noconfirm :preserve-modes)
+          (set-buffer-modified-p nil)
+          t)))))
+
+;;;###autoload
+(defun agenix-mode-if-with-secrets-nix ()
+  "Enable `agenix-mode' if the current buffer is in a directory with secrets.nix."
+  (interactive)
+  (when (agenix--secrets-nix-path)
+    (agenix-mode)))
+
+;;;###autoload
+(add-to-list 'auto-mode-alist '("\\.age\\'" . agenix-mode-if-with-secrets-nix))
+
+(provide 'agenix)
+;;; agenix.el ends here

config/doom/packages.el

@@ -1,5 +1,4 @@
 ;; -*- no-byte-compile: t; -*-
-;;; $DOOMDIR/packages.el
 
 ;; To install a package with Doom you must declare them here and run 'doom sync'
 ;; on the command line, then restart Emacs for the changes to take effect -- or
@@ -49,18 +48,35 @@
 ;; ...Or *all* packages (NOT RECOMMENDED; will likely break things)
 ;(unpin! t)
 
+(package! base16-theme)
 (package! parinfer)
 
+;; Env
+(package! inheritenv)
+
 ;; Editor
 (package! dot-mode)
 
 ;; Python
 (package! py-autopep8)
 
+;; Web (HTML + CSS)
+(package! lsp-tailwindcss :recipe (:host github :repo "merrickluo/lsp-tailwindcss"))
+
 ;; Org
-(package! org-trello)
 
 ;; Org-Roam UI
-(unpin! org-roam)
+; (unpin! org-roam)
-(package! websocket)
+; (package! websocket)
-(package! org-roam-ui :recipe (:host github :repo "org-roam/org-roam-ui" :files ("*.el" "out")))
+; (package! org-roam-ui :recipe (:host github :repo "org-roam/org-roam-ui" :files ("*.el" "out")))
+
+(package! doom-nano-modeline
+  :recipe (:host github
+           :repo "ronisbr/doom-nano-modeline"))
+
+;; Agenix
+;; (package! agenix
+;;   :recipe (:host github
+;;            :repo "t4ccer/agenix.el"
+;;            :branch "main"
+;;            :files ("*.el")))

config/eww/bars/top-bar.scss

@@ -0,0 +1,149 @@
+*{
+    all: unset;
+    font-family: Iosevka;
+    font-size: 16px;
+}
+
+/** Top bar **/
+.top-bar {
+    padding-left: 16px;
+    padding-right: 24px;
+}
+
+tooltip.background {
+    background-color: $base00;
+    border-radius: 10px;
+    color: $base07;
+}
+
+tooltip label {
+    margin: 6px;
+}
+
+.module {
+    margin: 0px 0px 0px 0px;
+    border-radius: 0px 0px 0px 0px;
+    padding-left: 8px;
+    padding-right: 8px;
+}
+
+.icon {
+    font-size: 24px;
+    padding-right: 8px;
+}
+
+.separator {
+    padding-left: 4px;
+    padding-right: 4px;
+    color: $base02;
+}
+
+/** Bluetooth **/
+.bluetooth {
+    color: $base0D;
+}
+
+.bluetooth.icon {
+    padding-right: 4px;
+}
+
+.bluetooth-text {
+    padding-left: 8px;
+}
+
+/** Wifi **/
+.wifi {
+    color: $base0D;
+}
+
+.wifi.icon {
+    padding-right: 12px;
+}
+
+.wifi-text {
+    padding-left: 8px;
+}
+
+/** Volume **/
+.volume {
+    color: $base0A;
+}
+
+.volume-mute {
+    color: $base04;
+}
+
+.volume-bar {
+    padding-left: 8px;
+    highlight {
+        background-color: $base0A;
+        border-radius: 10px;
+    }
+    trough {
+        background-color: $base04;
+        min-height: 10px;
+        border-radius: 10px;
+    }
+}
+
+/** Battery **/
+.battery.charging {
+    color: $base0B;
+}
+
+.battery.discharging {
+    padding-right: 0px;
+    color: $base04;
+}
+
+.battery-bar {
+    padding-left: 8px;
+    progress {
+        background-color: $base0B;
+        border-radius: 10px;
+        min-height: 10px;
+    }
+    trough {
+        background-color: $base04;
+        border-radius: 10px;
+        min-height: 10px;
+        min-width: 60px;
+    }
+}
+
+/** Clock **/
+.clock {
+    color: $base05;
+}
+
+.clock-time {
+    padding-left: 4px;
+    padding-right: 4px;
+}
+
+.clock-date {
+    padding-left: 4px;
+}
+
+.clock-year {
+    padding-bottom: 8px;
+    font-size: 75%;
+}
+
+/** Workspaces **/
+
+.workspace-entry {
+    padding-left: 8px;
+    padding-right: 8px;
+}
+.workspace-entry.occupied {
+    color: $base06;
+}
+
+.workspace-entry.empty {
+    color: $base02;
+}
+
+.workspace-entry.current {
+    color: $base0C;
+}

config/eww/bars/top-bar.yuck

@@ -0,0 +1,44 @@
+(include "./widgets/common.yuck")
+
+(include "./widgets/battery.yuck")
+(include "./widgets/bluetooth.yuck")
+(include "./widgets/clock.yuck")
+(include "./widgets/volume.yuck")
+(include "./widgets/workspaces.yuck")
+(include "./widgets/wifi.yuck")
+
+(defwindow top-bar
+          :monitor 0
+          :geometry (geometry :x "0%"
+                              :y "8px"
+                              :width "100%"
+                              :height "40px"
+                              :anchor "top center")
+          :stacking "fg"
+          :exclusive "true"
+  (box :class "top-bar"
+       :orientation "h"
+       :space-evenly "true"
+       (bar-left)
+       (bar-center)
+       (bar-right)))
+
+(defwidget bar-left []
+  (box :halign "start"
+       :orientation "h"
+       (workspaces-module)))
+
+(defwidget bar-center []
+  (box :halign "center"
+       :orientation "h"))
+
+(defwidget bar-right []
+  (box :halign "end"
+       :orientation "h"
+       :space-evenly "false"
+       (bluetooth-module)
+       (wifi-module)
+       (battery-module)
+       (volume-module)
+       (sep)
+       (clock-module)))

config/eww/eww.scss

@@ -0,0 +1,2 @@
+@import './colour-scheme.scss'
+@import './bars/top-bar.scss'

config/eww/eww.yuck

@@ -0,0 +1 @@
+(include "./bars/top-bar.yuck")

config/eww/scripts/get-active-workspace.sh

@@ -0,0 +1,6 @@
+#!/usr/bin/env bash
+
+hyprctl monitors -j | jq '.[] | select(.focused) | .activeWorkspace.id'
+
+socat -u UNIX-CONNECT:$XDG_RUNTIME_DIR/hypr/$HYPRLAND_INSTANCE_SIGNATURE/.socket2.sock - |
+  stdbuf -o0 awk -F '>>|,' -e '/^workspace>>/ {print $2}' -e '/^focusedmon>>/ {print $3}'

config/eww/scripts/get-volume-info.sh

@@ -0,0 +1,7 @@
+#!/bin/env bash
+
+amixer sget Master | \
+    grep 'Left:' | \
+    sed -e 's/[^[]*\[\([0-9]*\)%\][^[]\[\(\w*\)\]/{"volume": \1, "muted": \2}/' \
+        -e 's/on/false/' \
+        -e 's/off/true/'

config/eww/scripts/get-wifi-info.sh

@@ -0,0 +1,8 @@
+#!/bin/env bash
+
+CONN_INFO=$(nmcli -g in-use,ssid,signal dev wifi list | \
+    grep "^*" | \
+    sed -e 's/\*:\([^:]*\):\([0-9]*\)/ ,"ssid": "\1", "signal": \2/')
+CONNECTED=$([[ -z $CONN_INFO ]] && echo "false" || echo "true")
+
+echo "{\"connected\": \"$CONNECTED\"$CONN_INFO}"

config/eww/scripts/get-workspaces.sh

@@ -0,0 +1,11 @@
+#!/bin/env bash
+
+spaces (){
+	WORKSPACE_WINDOWS=$(hyprctl workspaces -j | jq 'map({key: .id | tostring, value: .windows}) | from_entries')
+	seq 1 6 | jq --argjson windows "${WORKSPACE_WINDOWS}" --slurp -Mc 'map(tostring) | map({id: ., windows: ($windows[.]//0)})'
+}
+
+spaces
+socat -u UNIX-CONNECT:$XDG_RUNTIME_DIR/hypr/$HYPRLAND_INSTANCE_SIGNATURE/.socket2.sock - | while read -r line; do
+	spaces
+done

config/eww/widgets/battery.yuck

@@ -0,0 +1,21 @@
+(defvar battery-reveal false)
+
+(defwidget battery-module []
+  (eventbox :onhover "${EWW_CMD} update battery-reveal=true"
+            :onhoverlost "${EWW_CMD} update battery-reveal=false"
+            (box :class "module battery ${EWW_BATTERY.BAT0.status == "Discharging" ? "discharging" : "charging"}"
+                 :orientation "h"
+                 :space-evenly "false"
+                 :tooltip "Battery: ${EWW_BATTERY.BAT0.capacity}%"
+                 (label :text {EWW_BATTERY.BAT0.status == "Discharging" ?
+                               EWW_BATTERY.BAT0.capacity < 10 ? "󰂎" : EWW_BATTERY.BAT0.capacity < 30 ? "󱊡" : EWW_BATTERY.BAT0.capacity < 70 ? "󱊢" : "󱊣" :
+                               EWW_BATTERY.BAT0.capacity < 10 ? "󰢟" : EWW_BATTERY.BAT0.capacity < 30 ? "󱊤" : EWW_BATTERY.BAT0.capacity < 70 ? "󱊥" : "󱊦"}
+                        :class "battery icon")
+                 (revealer :transition "slideleft"
+                           :duration "750ms"
+                           :reveal {battery-reveal}
+                           (progress :class "battery-bar"
+                                     :orientation "h"
+                                     :valign "center"
+                                     :width 60
+                                     :value {EWW_BATTERY.BAT0.capacity})))))

config/eww/widgets/bluetooth.yuck

@@ -0,0 +1,29 @@
+(defvar bluetooth-reveal false)
+(defpoll bluetooth-status
+  :initial ""
+  :interval "10s"
+  "bluetoothctl show | grep -q \"Powered: yes\" && { [[ $(bluetoothctl devices Connected) ]] && echo \"connected\" || echo \"on\"; } || echo \"off\"")
+(defpoll bluetooth-devices
+  :initial ""
+  :interval "20s"
+  "for device in $(bluetoothctl devices Connected | grep Device | cut -d ' ' -f 2); do bluetoothctl info $device | grep \"Alias\" | cut -d ' ' -f 2-; done;")
+
+
+(defwidget bluetooth-module []
+  (eventbox :onhover "${EWW_CMD} update bluetooth-reveal=true"
+            :onhoverlost "${EWW_CMD} update bluetooth-reveal=false"
+            :onclick "$HOME/.config/rofi/menus/bluetooth/bluetooth.sh &"
+            (box :class "module bluetooth"
+                 :orientation "h"
+                 :space-evenly "false"
+                 :tooltip {bluetooth-status == "connected" ? bluetooth-devices :
+                           bluetooth-status == "on" ? "Bluetooth: On" : "Bluetooth: Off"}
+                 (label :text {bluetooth-status == "connected" ? "󰂱" :
+                               bluetooth-status == "on" ? "󰂯" : "󰂲"}
+                        :class "bluetooth icon")
+                 (revealer :transition "slideleft"
+                           :duration "750ms"
+                           :reveal {bluetooth-reveal && winfo.connected}
+                           (label :class "bluetooth-text"
+                                  :text {bluetooth-status == "connected" ? "Connected" :
+                                         bluetooth-status == "on" ? "On" : "Off"})))))

config/eww/widgets/clock.yuck

@@ -0,0 +1,21 @@
+(defpoll clock-time :interval "1s" "date +\"%H:%M:%S\"")
+(defpoll clock-date :interval "1m" "date +\"%d/%m\"")
+(defpoll clock-year :interval "1h" "date +\"%Y\"")
+(defvar date-reveal false)
+
+(defwidget clock-module []
+  (eventbox :onhover "${EWW_CMD} update date-reveal=true"
+            :onhoverlost "${EWW_CMD} update date-reveal=false"
+            (box :class "module clock"
+                 :orientation "h"
+                 :space-evenly "false"
+                 (label :text clock-time
+                        :class "clock-time")
+                 (revealer :transition "slideleft"
+                           :duration "750ms"
+                           :reveal {date-reveal}
+                           (box :orientation "h"
+                                (label :text clock-date
+                                       :class "clock-date")
+                                (label :text clock-year
+                                       :class "clock-year"))))))

config/eww/widgets/common.yuck

@@ -0,0 +1,3 @@
+(defwidget sep []
+  (label :text "|"
+         :class "separator"))

config/eww/widgets/volume.yuck

@@ -0,0 +1,26 @@
+(defpoll vinfo
+  :initial "{\"volume\": 0, \"muted\": false}"
+  :interval "1s"
+  "bash ~/.config/eww/scripts/get-volume-info.sh")
+(defvar volume-reveal false)
+
+(defwidget volume-module []
+  (eventbox :onhover "${EWW_CMD} update volume-reveal=true"
+            :onhoverlost "${EWW_CMD} update volume-reveal=false"
+            (box :class "module volume"
+                 :orientation "h"
+                 :space-evenly false
+                 :tooltip {vinfo.muted? "muted" : "Volume: ${vinfo.volume}%"}
+                 (label :text {vinfo.muted ? "󰝟" : vinfo.volume < 10 ? "󰕿" : vinfo.volume < 70 ? "󰖀" : "󰕾"}
+                        :class "volume icon ${vinfo.muted ? "volume-mute" : ""}")
+                 (revealer :transition "slideleft"
+                           :duration "750ms"
+                           :reveal {volume-reveal && !vinfo.muted}
+                           (scale :class "volume-bar"
+                                  :orientation "h"
+                                  :valign "center"
+                                  :width 60
+                                  :min 0
+                                  :max 101
+                                  :value {vinfo.volume}
+                                  :onchange "amixer sset Master {}% > /dev/null")))))

config/eww/widgets/wifi.yuck

@@ -0,0 +1,25 @@
+(defvar wifi-reveal false)
+(defpoll winfo
+  :initial "{\"connected\": \"false\"}"
+  :interval "10s"
+  "bash ~/.config/eww/scripts/get-wifi-info.sh")
+
+
+(defwidget wifi-module []
+  (eventbox :onhover "${EWW_CMD} update wifi-reveal=true"
+            :onhoverlost "${EWW_CMD} update wifi-reveal=false"
+            :onclick "$HOME/.config/rofi/menus/wifi/wifi.sh &"
+            (box :class "module wifi"
+                 :orientation "h"
+                 :space-evenly "false"
+                 :tooltip {winfo.connected ? "Signal: ${winfo.signal}%" : "Disconnected"}
+                 (label :text { !winfo.connected ? "󰤭" :
+                               winfo.signal < 25 ? "󰤟" :
+                               winfo.signal < 50 ? "󰤢" :
+                               winfo.signal < 75 ? "󰤥" : "󰤨"}
+                        :class "wifi icon")
+                 (revealer :transition "slideleft"
+                           :duration "750ms"
+                           :reveal {wifi-reveal && winfo.connected}
+                           (label :class "wifi-text"
+                                  :text {winfo.connected ? winfo.ssid : "Disconnected"})))))

config/eww/widgets/workspaces.yuck

@@ -0,0 +1,10 @@
+(deflisten workspaces :initial "[]" "bash ~/.config/eww/scripts/get-workspaces.sh")
+(deflisten current_workspace :initial "1" "bash ~/.config/eww/scripts/get-active-workspace.sh")
+(defwidget workspaces-module []
+  (box :space-evenly true
+       (label :text "${workspaces}${current_workspace}"
+              :visible false)
+    (for workspace in workspaces
+         (eventbox :onclick "hyprctl dispatch workspace ${workspace.id}"
+                   (label :text "${workspace.id == current_workspace ? "" : ""}"
+                          :class "workspace-entry ${workspace.id == current_workspace ? "current" : ""} ${workspace.windows > 0 ? "occupied" : "empty"}")))))

config/grapheio/scripts/brightness.sh

@@ -0,0 +1,72 @@
+#!/usr/bin/env bash
+
+# Dependencies:
+# - amixer
+# - pactl
+# - jq
+# - libnotify
+
+ACTION=$1
+
+get_brightness() {
+    brightnessctl | \
+        grep "Current brightness" | \
+        sed -e 's/^\s\+Current brightness: [0-9]\+ (\([0-9]\+\)%).*$/\1/'
+}
+
+get_kb_brightness() {
+    brightnessctl -d platform::kbd_backlight | \
+        grep "Current brightness" | \
+        sed -e 's/^\s\+Current brightness: [0-9]\+ (\([0-9]\+\)%).*$/\1/'
+}
+
+notify() {
+    notify-send "$1" "$2" -e -t 1500 -h string:x-canonical-private-synchronous:brightness
+}
+
+set_brightness() {
+    # Set the brightness
+    TARGET=$1
+    brightnessctl set $TARGET > /dev/null
+
+    # Send a notification
+    BRIGHTNESS=$(get_brightness)
+    ACTION=$([[ ${TARGET:0:1} == "+" ]] && echo "Brightness Up" || echo "Brightness Down")
+
+    BRIGHTNESS_ICON="󰃠"
+
+    TITLE=$(echo "$BRIGHTNESS_ICON $ACTION")
+    BODY=$(echo "$BRIGHTNESS%")
+    notify "$TITLE" "$BODY"
+}
+
+set_kb_brightness() {
+    # Set the brightness
+    TARGET=$1
+    brightnessctl -d platform::kbd_backlight set $TARGET > /dev/null
+
+    # Send a notification
+    BRIGHTNESS=$(get_kb_brightness)
+    ACTION=$([[ ${TARGET:0:1} == "+" ]] && echo "Keyboard brightness Up" || echo "Keyboard brightness Down")
+
+    BRIGHTNESS_ICON="󰃠"
+
+    TITLE=$(echo "$BRIGHTNESS_ICON $ACTION")
+    BODY=$(echo "$BRIGHTNESS%")
+    notify "$TITLE" "$BODY"
+}
+
+
+case $ACTION in
+    set)
+        set_brightness $2
+        ;;
+    kb_set)
+        set_kb_brightness $2
+        ;;
+    *)
+        echo "Unknown action"
+        exit 1
+        ;;
+esac
+

config/grapheio/scripts/screenshot.sh

@@ -0,0 +1,27 @@
+#!/usr/bin/env bash
+set -e
+
+# Dependencies:
+# - slurp
+# - grim
+
+ACTION=$1
+
+DATESTAMP=$(date +"%Y%m%d%H%M%S")
+OUT_DIR="${HOME}/screenshots"
+OUT_FILE="capture-${ACTION}-${DATESTAMP}.png"
+
+case $ACTION in
+    region)
+        [[ ! -d "${OUT_DIR}" ]] && mkdir $OUT_DIR
+        slurp | grim -t png -g - "${OUT_DIR}/${OUT_FILE}"
+        ;;
+    screen)
+        [[ ! -d "${OUT_DIR}" ]] && mkdir $OUT_DIR
+        grim -t png "${OUT_DIR}/${OUT_FILE}"
+        ;;
+    *)
+        echo "Unknown action"
+        exit 1
+        ;;
+esac

config/grapheio/scripts/volume.sh

@@ -0,0 +1,79 @@
+#!/usr/bin/env bash
+
+# Dependencies:
+# - amixer
+# - pactl
+# - jq
+# - libnotify
+
+ACTION=$1
+
+get_volume_info() {
+    amixer sget Master | \
+        grep 'Left:' | \
+        sed -e 's/[^[]*\[\([0-9]*\)%\][^[]\[\(\w*\)\]/{"volume": \1, "muted": \2}/' \
+            -e 's/on/false/' \
+            -e 's/off/true/'
+}
+
+notify() {
+    notify-send "$1" "$2" -e -t 1500 -h string:x-canonical-private-synchronous:volume
+}
+
+mute() {
+    pactl set-sink-mute @DEFAULT_SINK@ toggle
+
+    VOLUME_INFO=$(get_volume_info)
+    VOLUME=$(echo $VOLUME_INFO | jq .volume)
+    if [ $(echo $VOLUME_INFO | jq .muted) == "true" ]
+    then
+        AUDIO_ICON="󰝟"
+        MUTED_STR="Muted"
+        BODY=""
+    else
+        AUDIO_ICON="󰕾"
+        MUTED_STR="Unmuted"
+        BODY=$(echo "$VOLUME%")
+    fi
+
+    TITLE=$(echo "$AUDIO_ICON $MUTED_STR")
+    notify "$TITLE" "$BODY"
+}
+
+set_volume() {
+    # Set the volume
+    TARGET=$1
+    pactl set-sink-volume @DEFAULT_SINK@ $TARGET
+
+    # Send a notification
+    VOLUME_INFO=$(get_volume_info)
+    ACTION=$([[ ${TARGET:0:1} == "+" ]] && echo "Volume Up" || echo "Volume Down")
+    VOLUME=$(echo $VOLUME_INFO | jq .volume)
+
+    if [ $(echo $VOLUME_INFO | jq .muted) == "true" ]
+    then
+        AUDIO_ICON="󰝟"
+        MUTED_STR="[muted]"
+    else
+        AUDIO_ICON="󰕾"
+        MUTED_STR=""
+    fi
+
+    TITLE=$(echo "$AUDIO_ICON $ACTION")
+    BODY=$(echo "$VOLUME% $MUTED_STR")
+    notify "$TITLE" "$BODY"
+}
+
+case $ACTION in
+    mute)
+        mute
+        ;;
+    set)
+        set_volume $2
+        ;;
+    *)
+        echo "Unknown action"
+        exit 1
+        ;;
+esac
+

config/kanata/kanata.kbd

@@ -0,0 +1,70 @@
+(defcfg
+  linux-dev-names-exclude (
+   "ZSA Technology Labs Voyager"
+   "ZSA Technology Labs Voyager Consumer Control"
+   "ZSA Technology Labs Voyager Keyboard"
+  )
+)
+
+
+(deflocalkeys-linux
+  ImpPt 99
+  º 41
+  ' 12
+  ¡ 13
+  ` 26
+  + 27
+  ñ 39
+  ´ 40
+  ç 43
+  < 86
+  - 53
+)
+
+(defsrc
+    esc  f1 f2 f3 f4 f5 f6 f7 f8 f9 f10 f11 f12 ins ImpPt del     home end pgup pgdn
+    º    1  2  3  4  5  6  7  8  9  0   '   ¡       Backspace     nlck kp/  kp*  kp-
+    tab  q  w  e  r  t  y  u  i  o  p   `   +                     kp7  kp8  kp9
+    caps a  s  d  f  g  h  j  k  l  ñ   ´   ç             ret     kp4  kp5  kp6  kp+
+    lsft <  z  x  c  v  b  n  m  ,  .   -                rsft     kp1  kp2  kp3
+    lctl    lmet lalt     spc     ralt   rctl          up              kp0  kp. kprt
+                                                 left down rght
+)
+
+(defvar
+    tap-time 200
+    hold-time 250
+)
+
+(defalias
+    caps (tap-hold $tap-time $hold-time caps (layer-while-held layer1))
+    a (tap-hold $tap-time $hold-time a lalt)
+    s (tap-hold $tap-time $hold-time s lsft)
+    d (tap-hold $tap-time $hold-time d lmet)
+    f (tap-hold $tap-time $hold-time f lctl)
+    g (tap-hold $tap-time $hold-time g (layer-while-held layer1))
+    h (tap-hold $tap-time $hold-time h rctl)
+    j (tap-hold $tap-time $hold-time j rmet)
+    k (tap-hold $tap-time $hold-time k rsft)
+    l (tap-hold $tap-time $hold-time l ralt)
+)
+
+(deflayer base
+    esc   mute vold volu -    brdn brup -  -  -  -   -   -   ins ImpPt del     home end pgup pgdn
+    º     1    2    3    4    5    6    7  8  9  0   '   ¡       Backspace     nlck kp/  kp*  kp-
+    tab   q    w    e    r    t    y    u  i  o  p   `   +                     kp7  kp8  kp9
+    @caps @a   @s   @d   @f   @g   @h   @j @k @l ñ   ´   ç             ret     kp4  kp5  kp6  kp+
+    lsft  <    z    x    c    v    b    n  m  ,  .   -                rsft     kp1  kp2  kp3
+    lctl     lmet lalt        spc          ralt   rctl          up              kp0  kp. kprt
+                                                          left down rght
+)
+
+(deflayer layer1
+    _  f1 f2 f3 f4 f5 f6   f7   f8 f9    f10 f11 f12 _   _       _     _  _  _  _
+    _  _  _  _  _  _  _    _    _  _     _   _   _               _     _  _  _  _
+    _  _  _  _  _  _  _    _    _  _     _   _   _                     _  _  _
+    _  _  _  _  _  _  left down up right _   _   _               _     _  _  _  _
+    _  _  _  _  _  _  _    _    _  _     _   _                   _     _  _  _
+    _     _  _             _             _       _           _            _  _  _
+                                                          _  _  _
+)

config/nomad.d/client.json

@@ -0,0 +1,13 @@
+{
+    "client": {
+        "enabled": true,
+        "network_interface": "tailscale0",
+
+        "options": {
+            "docker.volumes.enabled": true
+        }
+    },
+    "consul": {
+        "address": "127.0.0.1:8500"
+    }
+}

config/nomad.d/common.json

@@ -0,0 +1,11 @@
+{
+  "datacenter": "samfelag",
+  
+  "bind_addr": "{{ GetInterfaceIP \"tailscale0\" }}",
+
+  "advertise": {
+    "http": "{{ GetInterfaceIP \"tailscale0\" }}",
+    "rpc": "{{ GetInterfaceIP \"tailscale0\" }}",
+    "serf": "{{ GetInterfaceIP \"tailscale0\" }}"
+  }
+}

config/nomad.d/host-reykjavik.json

@@ -0,0 +1,10 @@
+{
+    "client": {
+        "host_volume": {
+            "test": {
+              "path": "/mnt/raid1/nomad_volumes/nextcloud/nextcloud",
+              "read_only": false
+            }
+        }
+    }
+}

config/nomad.d/host-thingvellir.hcl

@@ -0,0 +1,40 @@
+client {
+  # --- Network ---
+
+  host_network "public" {
+    interface = "ens3"
+  }
+
+  # --- Volumes ---
+  # DNS
+  host_volume "dns-pihole" {
+    path = "/var/lib/nomad_volumes/dns/pihole/etc-pihole"
+    read_only = false
+  }
+  host_volume "dns-dnsmasq" {
+    path = "/var/lib/nomad_volumes/dns/pihole/etc-dnsmasq.d"
+    read_only = false
+  }
+
+  # Caddy
+  host_volume "caddyfile" {
+    path = "/var/lib/nomad_volumes/caddy/Caddyfile"
+    read_only = false
+  }
+  host_volume "caddy-data" {
+    path = "/var/lib/nomad_volumes/caddy/data"
+    read_only = false
+  }
+
+  # Gitea
+  host_volume "gitea" {
+    path = "/mnt/vatnajokull/nomad_volumes/gitea/data"
+    read_only = false
+  }
+
+  # Folkugat
+  host_volume "folkugat" {
+    path = "/var/lib/nomad_volumes/folkugat"
+    read_only = false
+  }
+}

config/nomad.d/server.json

@@ -0,0 +1,6 @@
+{
+    "server": {
+      "enabled": true,
+      "bootstrap_expect": 1
+  }
+}

config/polybar/bars/bars.ini

@@ -0,0 +1,54 @@
+include-file = colours.ini
+include-directory = modules
+
+[bar/base]
+dpi      = 96
+width    = 100%
+height   = 32
+offset-x = 0
+offset-y = 0
+
+font-0 = "Iosevka Nerd Font:size=10;2"
+font-1 = "Iosevka Nerd Font:size=16;2"
+font-2 = "Iosevka Nerd Font:size=20;4"
+
+background = ${colours/bar.bg}
+foreground = ${colours/bar.fg}
+
+border-bottom-size  = 5
+border-top-size     = 5
+border-left-size    = 10
+border-right-size   = 10
+
+border-bottom-color = ${colours/bar.bg}
+border-top-color    = ${colours/bar.bg}
+border-left-color  = ${colours/bar.bg}
+border-right-color = ${colours/bar.bg}
+
+spacing            = 0
+padding-left       = 0
+padding-right      = 0
+module-margin-left = 0
+
+separator            = |
+separator-padding    = .5
+separator-foreground = ${colours/bar.bg}
+separator-background = ${colours/bar.bg}
+
+[bar/bottom]
+inherit = bar/base
+bottom = true
+
+modules-left  = workspaces 
+modules-right = wireless bluetooth volume battery
+
+tray-position = center
+tray-maxsize = 28
+
+[bar/top]
+inherit = bar/base
+bottom = false
+
+modules-left   = spotify  
+modules-center = date
+modules-right  = i3-mode

config/polybar/bars/colours.ini

@@ -0,0 +1,61 @@
+[colours]
+trans = #0000
+white = #fff
+black = #000
+gray = #555
+
+[colours/bar]
+bg = ${colour-scheme.base00}
+fg = ${colour-scheme.base05}
+
+[colours/date]
+bg = ${colour-scheme.base00}
+fg = ${colour-scheme.base05}
+
+[colours/battery]
+full-bg = ${colour-scheme.base00}
+full-fg = ${colour-scheme.base0C}
+charging-bg = ${colour-scheme.base00}
+charging-fg = ${colour-scheme.base0D}
+discharging-bg = ${colour-scheme.base00}
+discharging-fg = ${colour-scheme.base0F}
+low-bg = ${colour-scheme.base00}
+low-fg = ${colour-scheme.base0E}
+
+[colours/workspaces]
+focused-bg = ${colour-scheme.base02}
+focused-fg = ${colour-scheme.base04}
+unfocused-bg = ${colour-scheme.base01}
+unfocused-fg = ${colour-scheme.base05}
+urgent-bg = ${colour-scheme.base0E}
+urgent-fg = ${colour-scheme.base01}
+
+[colours/i3-mode]
+bg = ${colour-scheme.base0E}
+fg = ${colour-scheme.base01}
+
+[colours/volume]
+volume-bg = ${colour-scheme.base00}
+volume-fg = ${colour-scheme.base0C}
+muted-bg = ${colour-scheme.base00}
+muted-fg = ${colour-scheme.base0B}
+
+[colours/wireless]
+connected-bg = ${colour-scheme.base00}
+connected-fg = ${colour-scheme.base0C}
+disconnected-bg = ${colour-scheme.base00}
+disconnected-fg = ${colour-scheme.base0B}
+packetloss-bg = ${colour-scheme.base00}
+packetloss-fg = ${colour-scheme.base0E}
+
+[colours/bluetooth]
+bg = ${colour-scheme.base00}
+fg = ${colour-scheme.base0C}
+
+[colours/spotify]
+bg = ${colour-scheme.base00}
+fg = ${colour-scheme.base0A}
+
+[colours/ice]
+bg = ${colour-scheme.base00}
+fg = ${colour-scheme.base0A}

config/polybar/bars/modules/battery.ini

@@ -4,28 +4,28 @@ full-at       = 100
 low-at        = 20
 battery       = BAT0
 adapter       = ADP0
-poll-interval = 5
+poll-interval = 1
 
 format-full = <label-full>
-label-full            = "%{T2}%{T-} %percentage%%"
+label-full            = "%{T2}󰁹%{T-} %percentage%%"
 label-full-background = ${colours/battery.full-bg}
 label-full-foreground = ${colours/battery.full-fg}
 label-full-padding    = 1
 
 format-charging = <label-charging>
-label-charging            = "%{T2}%{T-} %percentage%%"
+label-charging            = "%{T2}󰂄%{T-} %percentage%%"
 label-charging-background = ${colours/battery.charging-bg}
 label-charging-foreground = ${colours/battery.charging-fg}
 label-charging-padding    = 1
 
 format-discharging = <label-discharging>
-label-discharging            = "%{T2}%{T-} %percentage%%"
+label-discharging            = "%{T2}󰂀%{T-} %percentage%%"
 label-discharging-background = ${colours/battery.discharging-bg}
 label-discharging-foreground = ${colours/battery.discharging-fg}
 label-discharging-padding    = 1
 
 format-low = <label-low>
-label-low            = "%{T2}%{T-} %percentage%%"
+label-low            = "%{T2}󰂃%{T-} %percentage%%"
 label-low-background = ${colours/battery.low-bg}
 label-low-foreground = ${colours/battery.low-fg}
 label-low-padding    = 1

config/polybar/bars/modules/bluetooth.ini

@@ -0,0 +1,9 @@
+[module/bluetooth]
+type = custom/script
+exec = ~/.config/rofi/menus/bluetooth/bluetooth.sh --status
+interval = 5
+click-left = ~/.config/rofi/menus/bluetooth/bluetooth.sh
+
+format-background = ${colours/bluetooth.bg}
+format-foreground = ${colours/bluetooth.fg}
+format-padding = 1

config/polybar/bars/modules/ice.ini

@@ -0,0 +1,8 @@
+[module/ice]
+type = custom/script
+exec = ~/.config/polybar/scripts/ice.sh
+interval = 5
+
+format-background = ${colours/ice.bg}
+format-foreground = ${colours/ice.fg}
+format-padding = 1

config/polybar/bars/modules/spotify.ini

@@ -0,0 +1,8 @@
+[module/spotify]
+type = custom/script
+exec = ~/.config/polybar/scripts/spotify.sh
+interval = 5
+
+format-background = ${colours/spotify.bg}
+format-foreground = ${colours/spotify.fg}
+format-padding = 1

config/polybar/bars/modules/volume.ini

@@ -3,13 +3,13 @@ type = internal/pulseaudio
 interval = 5
 
 format-volume = <label-volume>
-label-volume = %{T2}墳%{T-} %percentage%%
+label-volume = %{T2}󰕾 %{T-} %percentage%%
 label-volume-padding = 1
 label-volume-foreground = ${colours/volume.volume-fg}
 label-volume-background = ${colours/volume.volume-bg}
 
 format-muted = <label-muted>
-label-muted = %{T2}ﱝ%{T-} muted
+label-muted = %{T2}󰝟 %{T-} muted
 label-muted-padding = 1
 label-muted-foreground = ${colours/volume.muted-fg}
 label-muted-background = ${colours/volume.muted-bg}

config/polybar/bars/modules/wireless.ini

@@ -0,0 +1,28 @@
+[module/wireless]
+type = internal/network
+interface-type = wireless
+interval = 3.0
+
+accumulate-stats = true
+;unknown-as-up = true
+
+; The unit used for displaying network speeds
+; For example if set to the empty string, a speed of 5 KB/s is displayed as 5 K
+speed-unit = ''
+
+format-connected = <label-connected>
+label-connected = %{T2}󰖩 %{T-} %essid% (%local_ip%)
+label-connected-background = ${colours/wireless.connected-bg}
+label-connected-foreground = ${colours/wireless.connected-fg}
+label-connected-padding = 1
+
+format-disconnected = <label-disconnected>
+label-disconnected = %{T2}󰖪
+label-disconnected-background = ${colours/wireless.disconnected-bg}
+label-disconnected-foreground = ${colours/wireless.disconnected-fg}
+label-disconnected-padding = 1
+
+format-packetloss = <label-connected>*
+label-packetloss-background = ${colours/wireless.packetloss-bg}
+label-packetloss-foreground = ${colours/wireless.packetloss-fg}
+label-packetloss-padding = 1

config/polybar/config.ini

@@ -0,0 +1,3 @@
+# This file is generated by nixos-rebuild
+include-file = colour-scheme.ini
+include-file = bars/bars.ini

config/polybar/scripts/ice.sh

@@ -0,0 +1,33 @@
+#!/bin/sh
+# Show current train speed on ICE
+
+main() {
+  status=$(curl -X GET https://iceportal.de/api1/rs/status 2>/dev/null)
+  tripInfo=$(curl -X GET https://iceportal.de/api1/rs/tripInfo/trip 2>/dev/null)
+
+  if [[ -z $status || -z $tripInfo ]]; then
+      return
+  fi
+
+  # Speed
+  speed=$(echo $status | jq ".speed")
+
+  # Next stop
+  nextId=$(echo $tripInfo | jq ".trip.stopInfo.actualNext")
+  nextStop=$(echo $tripInfo | jq ".trip.stops[] | select( .station.evaNr == $nextId )")
+
+  nextStopName=$(echo $nextStop | jq -r ".station.name")
+  nextStopArrival=$(echo $nextStop | jq ".timetable.actualArrivalTime")
+
+  nextStopRemainingSeconds=$(expr $(expr $nextStopArrival / 1000) - $(date +%s))
+
+  if [[ ${nextStopRemainingSeconds:0:1} == "-" ]]; then
+    nextStopRemainingTime="Arribada!"
+  else
+    nextStopRemainingTime=$(date -d@$nextStopRemainingSeconds -u +%Hh%Mm%Ss)
+  fi
+
+  echo "  $nextStopName ·   $nextStopRemainingTime · 󰓅  $speed km/h"
+}
+
+main "$@"

config/polybar/scripts/spotify.sh

@@ -0,0 +1,20 @@
+#!/bin/sh
+
+main() {
+  pgrep spotify -l | grep -v spotify.sh > /dev/null || return
+
+  cmd="org.freedesktop.DBus.Properties.Get"
+  domain="org.mpris.MediaPlayer2"
+  path="/org/mpris/MediaPlayer2"
+
+  meta=$(dbus-send --print-reply --dest=${domain}.spotify /org/mpris/MediaPlayer2 ${cmd} string:${domain}.Player string:Metadata)
+
+  # Normal track
+  artist=$(echo "$meta" | sed -nr '/xesam:artist"/,+2s/^ +string "(.*)"$/\1/p' | tail -1  | sed 's/\&/\\&/g' | sed 's#\/#\\/#g')
+  album=$(echo "$meta" | sed -nr '/xesam:album"/,+2s/^ +variant +string "(.*)"$/\1/p' | tail -1| sed 's/\&/\\&/g'| sed 's#\/#\\/#g')
+  title=$(echo "$meta" | sed -nr '/xesam:title"/,+2s/^ +variant +string "(.*)"$/\1/p' | tail -1 | sed 's/\&/\\&/g'| sed 's#\/#\\/#g')
+
+  echo " ${*:-%artist% - %title%}" | sed "s/%artist%/$artist/g;s/%title%/$title/g;s/%album%/$album/g"i | sed "s/\&/\&/g" | sed "s#\/#\/#g"
+}
+
+main "$@"

config/rofi/menus/bluetooth/bluetooth.rasi

@@ -0,0 +1,139 @@
+/**
+ *
+ * Author : Marc Sastre, based on Aditya Shakya (adi1090x, Github : @adi1090x)
+ *
+ **/
+
+@import "~/.config/rofi/theme.rasi"
+
+/*****----- Configuration -----*****/
+configuration {
+    show-icons:                 false;
+}
+
+/*****----- Main Window -----*****/
+window {
+    /* properties for window widget */
+    transparency:                "real";
+    location:                    center;
+    anchor:                      center;
+    fullscreen:                  false;
+    width:                       800px;
+    x-offset:                    0px;
+    y-offset:                    0px;
+
+    /* properties for all widgets */
+    enabled:                     true;
+    margin:                      0px;
+    padding:                     0px;
+    border:                      2px solid;
+    border-radius:               15px;
+    border-color:                @background-alt;
+    cursor:                      "default";
+    background-color:            @background;
+}
+
+/*****----- Main Box -----*****/
+mainbox {
+    enabled:                     true;
+    spacing:                     15px;
+    margin:                      0px;
+    padding:                     30px;
+    border:                      0px solid;
+    border-radius:               0px;
+    border-color:                @selected;
+    background-color:            transparent;
+    children:                    [ "inputbar", "listview" ];
+}
+message {
+    enabled:                     true;
+    margin:                      0px;
+    padding:                     10px;
+    border:                      0px solid;
+    border-radius:               10px;
+    border-color:                @selected;
+    background-color:            @background-alt;
+    text-color:                  @foreground;
+}
+textbox {
+    background-color:            inherit;
+    text-color:                  inherit;
+    vertical-align:              0.5;
+    horizontal-align:            0.0;
+    placeholder-color:           @foreground;
+    blink:                       true;
+    markup:                      true;
+}
+
+/*****----- Inputbar -----*****/
+inputbar {
+    enabled:                     true;
+    spacing:                     10px;
+    padding:                     15px;
+    border-radius:               10px;
+    background-color:            @background-alt;
+    text-color:                  @foreground;
+    children:                    [ "textbox-prompt-colon", "entry" ];
+}
+textbox-prompt-colon {
+    enabled:                     true;
+    expand:                      false;
+    str:                         "";
+    background-color:            inherit;
+    text-color:                  inherit;
+}
+entry {
+    enabled:                     true;
+    background-color:            inherit;
+    text-color:                  inherit;
+    cursor:                      text;
+}
+
+/*****----- Listview -----*****/
+listview {
+    enabled:                     true;
+    columns:                     1;
+    lines:                       5;
+    cycle:                       true;
+    dynamic:                     true;
+    scrollbar:                   false;
+    layout:                      vertical;
+    reverse:                     false;
+    fixed-height:                true;
+    fixed-columns:               true;
+
+    spacing:                     5px;
+    margin:                      0px;
+    padding:                     0px;
+    border:                      0px solid;
+    border-radius:               0px;
+    border-color:                @selected;
+    background-color:            transparent;
+    text-color:                  @foreground;
+    cursor:                      "default";
+}
+
+/*****----- Elements -----*****/
+element {
+    enabled:                     true;
+    spacing:                     0px;
+    margin:                      0px;
+    padding:                     12px;
+    border:                      0px solid;
+    border-radius:               100%;
+    border-color:                @selected;
+    background-color:            transparent;
+    text-color:                  @foreground;
+    cursor:                      pointer;
+}
+element-text {
+    background-color:            transparent;
+    text-color:                  inherit;
+    cursor:                      inherit;
+    vertical-align:              0.5;
+    horizontal-align:            0.0;
+}
+element selected.normal {
+    background-color:            var(selected);
+    text-color:                  var(background);
+}

config/rofi/menus/bluetooth/bluetooth.sh

@@ -0,0 +1,322 @@
+ #!/usr/bin/env bash
+#             __ _       _     _            _              _   _
+#  _ __ ___  / _(_)     | |__ | |_   _  ___| |_ ___   ___ | |_| |__
+# | '__/ _ \| |_| |_____| '_ \| | | | |/ _ \ __/ _ \ / _ \| __| '_ \
+# | | | (_) |  _| |_____| |_) | | |_| |  __/ || (_) | (_) | |_| | | |
+# |_|  \___/|_| |_|     |_.__/|_|\__,_|\___|\__\___/ \___/ \__|_| |_|
+#
+# Author: Nick Clyde (clydedroid)
+#
+# A script that generates a rofi menu that uses bluetoothctl to
+# connect to bluetooth devices and display status info.
+#
+# Inspired by networkmanager-dmenu (https://github.com/firecat53/networkmanager-dmenu)
+# Thanks to x70b1 (https://github.com/polybar/polybar-scripts/tree/master/polybar-scripts/system-bluetooth-bluetoothctl)
+#
+# Depends on:
+#   Arch repositories: rofi, bluez-utils (contains bluetoothctl)
+
+# Constants
+divider=""
+goback="Back"
+
+# For debugging/development purposes
+# PREFIX=projects/samfelag/config/
+
+# Rofi command to pipe into, can add any options here
+dir="$HOME/$PREFIX.config/rofi/menus/bluetooth/"
+theme='bluetooth'
+
+rofi_command="rofi -dmenu -theme ${dir}/${theme}.rasi -i -p"
+
+# rofi -dmenu \
+#     -theme ${dir}/${theme}.rasi
+
+# Checks if bluetooth controller is powered on
+power_on() {
+    if bluetoothctl show | grep -q "Powered: yes"; then
+        return 0
+    else
+        return 1
+    fi
+}
+
+# Toggles power state
+toggle_power() {
+    if power_on; then
+        bluetoothctl power off
+        show_menu
+    else
+        if rfkill list bluetooth | grep -q 'blocked: yes'; then
+            rfkill unblock bluetooth && sleep 3
+        fi
+        bluetoothctl power on
+        show_menu
+    fi
+}
+
+# Checks if controller is scanning for new devices
+scan_on() {
+    if bluetoothctl show | grep -q "Discovering: yes"; then
+        echo "Scan: on"
+        return 0
+    else
+        echo "Scan: off"
+        return 1
+    fi
+}
+
+# Toggles scanning state
+toggle_scan() {
+    if scan_on; then
+        kill $(pgrep -f "bluetoothctl scan on")
+        bluetoothctl scan off
+        show_menu
+    else
+        bluetoothctl scan on &
+        echo "Scanning..."
+        sleep 5
+        show_menu
+    fi
+}
+
+# Checks if controller is able to pair to devices
+pairable_on() {
+    if bluetoothctl show | grep -q "Pairable: yes"; then
+        echo "Pairable: on"
+        return 0
+    else
+        echo "Pairable: off"
+        return 1
+    fi
+}
+
+# Toggles pairable state
+toggle_pairable() {
+    if pairable_on; then
+        bluetoothctl pairable off
+        show_menu
+    else
+        bluetoothctl pairable on
+        show_menu
+    fi
+}
+
+# Checks if controller is discoverable by other devices
+discoverable_on() {
+    if bluetoothctl show | grep -q "Discoverable: yes"; then
+        echo "Discoverable: on"
+        return 0
+    else
+        echo "Discoverable: off"
+        return 1
+    fi
+}
+
+# Toggles discoverable state
+toggle_discoverable() {
+    if discoverable_on; then
+        bluetoothctl discoverable off
+        show_menu
+    else
+        bluetoothctl discoverable on
+        show_menu
+    fi
+}
+
+# Checks if a device is connected
+device_connected() {
+    device_info=$(bluetoothctl info "$1")
+    if echo "$device_info" | grep -q "Connected: yes"; then
+        return 0
+    else
+        return 1
+    fi
+}
+
+# Toggles device connection
+toggle_connection() {
+    if device_connected $1; then
+        bluetoothctl disconnect $1
+        device_menu "$device"
+    else
+        bluetoothctl connect $1
+        device_menu "$device"
+    fi
+}
+
+# Checks if a device is paired
+device_paired() {
+    device_info=$(bluetoothctl info "$1")
+    if echo "$device_info" | grep -q "Paired: yes"; then
+        echo "Paired: yes"
+        return 0
+    else
+        echo "Paired: no"
+        return 1
+    fi
+}
+
+# Toggles device paired state
+toggle_paired() {
+    if device_paired $1; then
+        bluetoothctl remove $1
+        device_menu "$device"
+    else
+        bluetoothctl pair $1
+        device_menu "$device"
+    fi
+}
+
+# Checks if a device is trusted
+device_trusted() {
+    device_info=$(bluetoothctl info "$1")
+    if echo "$device_info" | grep -q "Trusted: yes"; then
+        echo "Trusted: yes"
+        return 0
+    else
+        echo "Trusted: no"
+        return 1
+    fi
+}
+
+# Toggles device connection
+toggle_trust() {
+    if device_trusted $1; then
+        bluetoothctl untrust $1
+        device_menu "$device"
+    else
+        bluetoothctl trust $1
+        device_menu "$device"
+    fi
+}
+
+# Prints a short string with the current bluetooth status
+# Useful for status bars like polybar, etc.
+print_status() {
+    if power_on; then
+        printf ''
+
+        paired_devices_cmd="paired-devices"
+
+        mapfile -t paired_devices < <(bluetoothctl $paired_devices_cmd | grep Device | cut -d ' ' -f 2)
+        counter=0
+
+        for device in "${paired_devices[@]}"; do
+            if device_connected $device; then
+                device_alias=$(bluetoothctl info $device | grep "Alias" | cut -d ' ' -f 2-)
+
+                if [ $counter -gt 0 ]; then
+                    printf ", %s" "$device_alias"
+                else
+                    printf " %s" "$device_alias"
+                fi
+
+                ((counter++))
+            fi
+        done
+        printf "\n"
+    else
+        echo "󰂲"
+    fi
+}
+
+# A submenu for a specific device that allows connecting, pairing, and trusting
+device_menu() {
+    device=$1
+
+    # Get device name and mac address
+    device_name=$(echo $device | cut -d ' ' -f 3-)
+    mac=$(echo $device | cut -d ' ' -f 2)
+
+    # Build options
+    if device_connected $mac; then
+        connected="Connected: yes"
+    else
+        connected="Connected: no"
+    fi
+    paired=$(device_paired $mac)
+    trusted=$(device_trusted $mac)
+    options="$connected\n$paired\n$trusted\n$divider\n$goback\nExit"
+
+    # Open rofi menu, read chosen option
+    chosen="$(echo -e "$options" | $rofi_command "$device_name")"
+
+    # Match chosen option to command
+    case $chosen in
+        "" | $divider)
+            echo "No option chosen."
+            ;;
+        $connected)
+            toggle_connection $mac
+            ;;
+        $paired)
+            toggle_paired $mac
+            ;;
+        $trusted)
+            toggle_trust $mac
+            ;;
+        $goback)
+            show_menu
+            ;;
+    esac
+}
+
+# Opens a rofi menu with current bluetooth status and options to connect
+show_menu() {
+    # Get menu options
+    if power_on; then
+        power="Power: on"
+
+        # Human-readable names of devices, one per line
+        # If scan is off, will only list paired devices
+        devices=$(bluetoothctl devices | grep Device | cut -d ' ' -f 3-)
+
+        # Get controller flags
+        scan=$(scan_on)
+        pairable=$(pairable_on)
+        discoverable=$(discoverable_on)
+
+        # Options passed to rofi
+        options="$devices\n$divider\n$power\n$scan\n$pairable\n$discoverable\nExit"
+    else
+        power="Power: off"
+        options="$power\nExit"
+    fi
+
+    # Open rofi menu, read chosen option
+    chosen="$(echo -e "$options" | $rofi_command "Bluetooth")"
+
+    # Match chosen option to command
+    case $chosen in
+        "" | $divider)
+            echo "No option chosen."
+            ;;
+        $power)
+            toggle_power
+            ;;
+        $scan)
+            toggle_scan
+            ;;
+        $discoverable)
+            toggle_discoverable
+            ;;
+        $pairable)
+            toggle_pairable
+            ;;
+        *)
+            device=$(bluetoothctl devices | grep "$chosen")
+            # Open a submenu if a device is selected
+            if [[ $device ]]; then device_menu "$device"; fi
+            ;;
+    esac
+}
+
+case "$1" in
+    --status)
+        print_status
+        ;;
+    *)
+        show_menu
+        ;;
+esac

config/rofi/menus/cliphist/cliphist.rasi

@@ -0,0 +1,147 @@
+/**
+ *
+ * Author : Marc Sastre, based on Aditya Shakya (adi1090x, Github : @adi1090x)
+ *
+ **/
+
+@import "~/.config/rofi/theme.rasi"
+
+/*****----- Configuration -----*****/
+configuration {
+    show-icons:                 false;
+}
+
+/*****----- Main Window -----*****/
+window {
+    /* properties for window widget */
+    transparency:                "real";
+    location:                    center;
+    anchor:                      center;
+    fullscreen:                  false;
+    width:                       800px;
+    x-offset:                    0px;
+    y-offset:                    0px;
+
+    /* properties for all widgets */
+    enabled:                     true;
+    margin:                      0px;
+    padding:                     0px;
+    border:                      2px solid;
+    border-radius:               15px;
+    border-color:                @background-alt;
+    cursor:                      "default";
+    background-color:            @background;
+}
+
+/*****----- Main Box -----*****/
+mainbox {
+    enabled:                     true;
+    spacing:                     15px;
+    margin:                      0px;
+    padding:                     30px;
+    border:                      0px solid;
+    border-radius:               0px;
+    border-color:                @selected;
+    background-color:            transparent;
+    children:                    [ "inputbar", "listview" ];
+}
+message {
+    enabled:                     true;
+    margin:                      0px;
+    padding:                     10px;
+    border:                      0px solid;
+    border-radius:               10px;
+    border-color:                @selected;
+    background-color:            @background-alt;
+    text-color:                  @foreground;
+}
+textbox {
+    background-color:            inherit;
+    text-color:                  inherit;
+    vertical-align:              0.5;
+    horizontal-align:            0.0;
+    placeholder-color:           @foreground;
+    blink:                       true;
+    markup:                      true;
+}
+
+/*****----- Inputbar -----*****/
+inputbar {
+    enabled:                     true;
+    spacing:                     10px;
+    padding:                     15px;
+    border-radius:               10px;
+    background-color:            @background-alt;
+    text-color:                  @foreground;
+    children:                    [ "textbox-prompt-colon", "entry" ];
+}
+textbox-prompt-colon {
+    enabled:                     true;
+    expand:                      false;
+    str:                         "";
+    background-color:            inherit;
+    text-color:                  inherit;
+}
+entry {
+    enabled:                     true;
+    background-color:            inherit;
+    text-color:                  inherit;
+    cursor:                      text;
+}
+
+/*****----- Listview -----*****/
+listview {
+    enabled:                     true;
+    columns:                     1;
+    lines:                       5;
+    cycle:                       true;
+    dynamic:                     true;
+    scrollbar:                   false;
+    layout:                      vertical;
+    reverse:                     false;
+    fixed-height:                true;
+    fixed-columns:               true;
+
+    spacing:                     5px;
+    margin:                      0px;
+    padding:                     0px;
+    border:                      0px solid;
+    border-radius:               0px;
+    border-color:                @selected;
+    background-color:            transparent;
+    text-color:                  @foreground;
+    cursor:                      "default";
+}
+
+/*****----- Elements -----*****/
+element {
+    enabled:                     true;
+    spacing:                     0px;
+    margin:                      0px;
+    padding:                     12px;
+    border:                      0px solid;
+    border-radius:               100%;
+    border-color:                @selected;
+    background-color:            transparent;
+    text-color:                  @foreground;
+    cursor:                      pointer;
+}
+element-text {
+    background-color:            transparent;
+    text-color:                  inherit;
+    cursor:                      inherit;
+    vertical-align:              0.5;
+    horizontal-align:            0.0;
+}
+element selected.normal {
+    background-color:            var(selected);
+    text-color:                  var(background);
+}
+element active {
+    background-color:            var(active);
+    text-color:                  var(background);
+}
+element selected.active {
+    background-color:            var(selected);
+    text-color:                  var(background);
+}

config/rofi/menus/cliphist/cliphist.sh

@@ -0,0 +1,12 @@
+#!/usr/bin/env bash
+
+# For debugging/development purposes
+# PREFIX=projects/samfelag/config/
+
+# Rofi command to pipe into, can add any options here
+dir="$HOME/$PREFIX.config/rofi/menus/cliphist/"
+theme='cliphist'
+
+rofi_command="rofi -dmenu -i -theme ${dir}/${theme}.rasi"
+
+cliphist list | $rofi_command | cliphist decode | wl-copy

config/rofi/menus/launcher/launcher.rasi

@@ -0,0 +1,199 @@
+/**
+ *
+ * Author : Marc Sastre, based on Aditya Shakya (adi1090x, Github : @adi1090x)
+ *
+ **/
+
+@import "~/.config/rofi/theme.rasi"
+
+/*****----- Configuration -----*****/
+configuration {
+	modi:                       "drun,run,filebrowser,window";
+    show-icons:                 true;
+    display-drun:               "APPS";
+    display-run:                "RUN";
+    display-filebrowser:        "FILES";
+    display-window:             "WINDOW";
+	drun-display-format:        "{name}";
+	window-format:              "{w} · {c} · {t}";
+}
+
+/*****----- Main Window -----*****/
+window {
+    /* properties for window widget */
+    transparency:                "real";
+    location:                    center;
+    anchor:                      center;
+    fullscreen:                  false;
+    width:                       1000px;
+    x-offset:                    0px;
+    y-offset:                    0px;
+
+    /* properties for all widgets */
+    enabled:                     true;
+    border:                      2px solid;
+    border-radius:               15px;
+    border-color:                @background-alt;
+    cursor:                      "default";
+    background-color:            @background;
+}
+
+/*****----- Main Box -----*****/
+mainbox {
+    enabled:                     true;
+    spacing:                     0px;
+    background-color:            transparent;
+    orientation:                 horizontal;
+    children:                    [ "imagebox", "listbox" ];
+}
+
+imagebox {
+    padding:                     20px;
+    background-color:            transparent;
+    background-image:            url("~/.config/rofi/nix.png", width);
+    orientation:                 vertical;
+    children:                    [ "inputbar", "dummy", "mode-switcher" ];
+}
+
+listbox {
+    spacing:                     20px;
+    padding:                     20px;
+    background-color:            transparent;
+    orientation:                 vertical;
+    children:                    [ "message", "listview" ];
+}
+
+dummy {
+    background-color:            transparent;
+}
+
+/*****----- Inputbar -----*****/
+inputbar {
+    enabled:                     true;
+    spacing:                     10px;
+    padding:                     15px;
+    border-radius:               10px;
+    background-color:            @background-alt;
+    text-color:                  @foreground;
+    children:                    [ "textbox-prompt-colon", "entry" ];
+}
+textbox-prompt-colon {
+    enabled:                     true;
+    expand:                      false;
+    str:                         "";
+    background-color:            inherit;
+    text-color:                  inherit;
+}
+entry {
+    enabled:                     true;
+    background-color:            inherit;
+    text-color:                  inherit;
+    cursor:                      text;
+    placeholder:                 "Search";
+    placeholder-color:           inherit;
+}
+
+/*****----- Mode Switcher -----*****/
+mode-switcher{
+    enabled:                     true;
+    spacing:                     20px;
+    background-color:            transparent;
+    text-color:                  @foreground;
+}
+button {
+    padding:                     15px;
+    border-radius:               10px;
+    background-color:            @background-alt;
+    text-color:                  inherit;
+    cursor:                      pointer;
+}
+button selected {
+    background-color:            @selected;
+    text-color:                  @foreground;
+}
+
+/*****----- Listview -----*****/
+listview {
+    enabled:                     true;
+    columns:                     1;
+    lines:                       8;
+    cycle:                       true;
+    dynamic:                     true;
+    scrollbar:                   false;
+    layout:                      vertical;
+    reverse:                     false;
+    fixed-height:                true;
+    fixed-columns:               true;
+
+    spacing:                     10px;
+    background-color:            transparent;
+    text-color:                  @foreground;
+    cursor:                      "default";
+}
+
+/*****----- Elements -----*****/
+element {
+    enabled:                     true;
+    spacing:                     15px;
+    padding:                     8px;
+    border-radius:               10px;
+    background-color:            transparent;
+    text-color:                  @foreground;
+    cursor:                      pointer;
+}
+element normal.normal {
+    background-color:            inherit;
+    text-color:                  inherit;
+}
+element normal.urgent {
+    background-color:            @urgent;
+    text-color:                  @foreground;
+}
+element normal.active {
+    background-color:            @active;
+    text-color:                  @foreground;
+}
+element selected.normal {
+    background-color:            @selected;
+    text-color:                  @foreground;
+}
+element selected.urgent {
+    background-color:            @urgent;
+    text-color:                  @foreground;
+}
+element selected.active {
+    background-color:            @urgent;
+    text-color:                  @foreground;
+}
+element-icon {
+    background-color:            transparent;
+    text-color:                  inherit;
+    size:                        32px;
+    cursor:                      inherit;
+}
+element-text {
+    background-color:            transparent;
+    text-color:                  inherit;
+    cursor:                      inherit;
+    vertical-align:              0.5;
+    horizontal-align:            0.0;
+}
+
+/*****----- Message -----*****/
+message {
+    background-color:            transparent;
+}
+textbox {
+    padding:                     15px;
+    border-radius:               10px;
+    background-color:            @background-alt;
+    text-color:                  @foreground;
+    vertical-align:              0.5;
+    horizontal-align:            0.0;
+}
+error-message {
+    padding:                     15px;
+    border-radius:               20px;
+    background-color:            @background;
+    text-color:                  @foreground;
+}

config/rofi/menus/launcher/launcher.sh

@@ -0,0 +1,13 @@
+#!/usr/bin/env sh
+
+## Author : Marc Sastre, based on Aditya Shakya (adi1090x, Github : @adi1090x)
+## Rofi   : Launcher
+
+# For debugging/development purposes
+# PREFIX=projects/samfelag/config/
+
+# Rofi command to pipe into, can add any options here
+dir="$HOME/$PREFIX.config/rofi/menus/launcher/"
+theme='launcher'
+
+rofi -show drun -theme ${dir}/${theme}.rasi

config/rofi/menus/pass/pass.rasi

@@ -0,0 +1,147 @@
+/**
+ *
+ * Author : Marc Sastre, based on Aditya Shakya (adi1090x, Github : @adi1090x)
+ *
+ **/
+
+@import "~/.config/rofi/theme.rasi"
+
+/*****----- Configuration -----*****/
+configuration {
+    show-icons:                 false;
+}
+
+/*****----- Main Window -----*****/
+window {
+    /* properties for window widget */
+    transparency:                "real";
+    location:                    center;
+    anchor:                      center;
+    fullscreen:                  false;
+    width:                       800px;
+    x-offset:                    0px;
+    y-offset:                    0px;
+
+    /* properties for all widgets */
+    enabled:                     true;
+    margin:                      0px;
+    padding:                     0px;
+    border:                      2px solid;
+    border-radius:               15px;
+    border-color:                @background-alt;
+    cursor:                      "default";
+    background-color:            @background;
+}
+
+/*****----- Main Box -----*****/
+mainbox {
+    enabled:                     true;
+    spacing:                     15px;
+    margin:                      0px;
+    padding:                     30px;
+    border:                      0px solid;
+    border-radius:               0px;
+    border-color:                @selected;
+    background-color:            transparent;
+    children:                    [ "message", "inputbar", "listview" ];
+}
+message {
+    enabled:                     true;
+    margin:                      0px;
+    padding:                     10px;
+    border:                      0px solid;
+    border-radius:               10px;
+    border-color:                @selected;
+    background-color:            @background-alt;
+    text-color:                  @foreground;
+}
+textbox {
+    background-color:            inherit;
+    text-color:                  inherit;
+    vertical-align:              0.5;
+    horizontal-align:            0.0;
+    placeholder-color:           @foreground;
+    blink:                       true;
+    markup:                      true;
+}
+
+/*****----- Inputbar -----*****/
+inputbar {
+    enabled:                     true;
+    spacing:                     10px;
+    padding:                     15px;
+    border-radius:               10px;
+    background-color:            @background-alt;
+    text-color:                  @foreground;
+    children:                    [ "textbox-prompt-colon", "entry" ];
+}
+textbox-prompt-colon {
+    enabled:                     true;
+    expand:                      false;
+    str:                         "";
+    background-color:            inherit;
+    text-color:                  inherit;
+}
+entry {
+    enabled:                     true;
+    background-color:            inherit;
+    text-color:                  inherit;
+    cursor:                      text;
+}
+
+/*****----- Listview -----*****/
+listview {
+    enabled:                     true;
+    columns:                     1;
+    lines:                       5;
+    cycle:                       true;
+    dynamic:                     true;
+    scrollbar:                   false;
+    layout:                      vertical;
+    reverse:                     false;
+    fixed-height:                true;
+    fixed-columns:               true;
+
+    spacing:                     5px;
+    margin:                      0px;
+    padding:                     0px;
+    border:                      0px solid;
+    border-radius:               0px;
+    border-color:                @selected;
+    background-color:            transparent;
+    text-color:                  @foreground;
+    cursor:                      "default";
+}
+
+/*****----- Elements -----*****/
+element {
+    enabled:                     true;
+    spacing:                     0px;
+    margin:                      0px;
+    padding:                     12px;
+    border:                      0px solid;
+    border-radius:               100%;
+    border-color:                @selected;
+    background-color:            transparent;
+    text-color:                  @foreground;
+    cursor:                      pointer;
+}
+element-text {
+    background-color:            transparent;
+    text-color:                  inherit;
+    cursor:                      inherit;
+    vertical-align:              0.5;
+    horizontal-align:            0.0;
+}
+element selected.normal {
+    background-color:            var(selected);
+    text-color:                  var(background);
+}
+element active {
+    background-color:            var(active);
+    text-color:                  var(background);
+}
+element selected.active {
+    background-color:            var(selected);
+    text-color:                  var(background);
+}

config/rofi/menus/powermenu/powermenu.rasi

@@ -0,0 +1,115 @@
+/**
+ *
+ * Author : Marc Sastre, based on Aditya Shakya (adi1090x, Github : @adi1090x)
+ *
+ **/
+
+@import "~/.config/rofi/theme.rasi"
+
+/*****----- Configuration -----*****/
+configuration {
+    show-icons:                 false;
+}
+
+/*****----- Main Window -----*****/
+window {
+    /* properties for window widget */
+    transparency:                "real";
+    location:                    center;
+    anchor:                      center;
+    fullscreen:                  false;
+    width:                       500px;
+    x-offset:                    0px;
+    y-offset:                    0px;
+
+    /* properties for all widgets */
+    enabled:                     true;
+    margin:                      0px;
+    padding:                     0px;
+    border:                      2px solid;
+    border-radius:               15px;
+    border-color:                @background-alt;
+    cursor:                      "default";
+    background-color:            @background;
+}
+
+/*****----- Main Box -----*****/
+mainbox {
+    enabled:                     true;
+    spacing:                     15px;
+    margin:                      0px;
+    padding:                     30px;
+    border:                      0px solid;
+    border-radius:               0px;
+    border-color:                @selected;
+    background-color:            transparent;
+    children:                    [ "listview" ];
+}
+message {
+    enabled:                     true;
+    margin:                      0px;
+    padding:                     10px;
+    border:                      0px solid;
+    border-radius:               10px;
+    border-color:                @selected;
+    background-color:            @background-alt;
+    text-color:                  @foreground;
+}
+textbox {
+    background-color:            inherit;
+    text-color:                  inherit;
+    vertical-align:              0.5;
+    horizontal-align:            0.0;
+    placeholder-color:           @foreground;
+    blink:                       true;
+    markup:                      true;
+}
+
+/*****----- Listview -----*****/
+listview {
+    enabled:                     true;
+    columns:                     1;
+    lines:                       5;
+    cycle:                       true;
+    dynamic:                     true;
+    scrollbar:                   false;
+    layout:                      vertical;
+    reverse:                     false;
+    fixed-height:                true;
+    fixed-columns:               true;
+
+    spacing:                     5px;
+    margin:                      0px;
+    padding:                     0px;
+    border:                      0px solid;
+    border-radius:               0px;
+    border-color:                @selected;
+    background-color:            transparent;
+    text-color:                  @foreground;
+    cursor:                      "default";
+}
+
+/*****----- Elements -----*****/
+element {
+    enabled:                     true;
+    spacing:                     0px;
+    margin:                      0px;
+    padding:                     12px;
+    border:                      0px solid;
+    border-radius:               100%;
+    border-color:                @selected;
+    background-color:            transparent;
+    text-color:                  @foreground;
+    cursor:                      pointer;
+}
+element-text {
+    background-color:            transparent;
+    text-color:                  inherit;
+    cursor:                      inherit;
+    vertical-align:              0.5;
+    horizontal-align:            0.0;
+}
+element selected.normal {
+    background-color:            var(selected);
+    text-color:                  var(background);
+}

config/rofi/menus/powermenu/powermenu.sh

@@ -0,0 +1,94 @@
+#!/usr/bin/env sh
+
+## Author : Marc Sastre, based on Aditya Shakya (adi1090x, Github : @adi1090x)
+## Rofi   : Power Menu
+
+# Current Theme
+dir="$HOME/.config/rofi/menus/powermenu/"
+theme='powermenu'
+
+# CMDs
+
+# Options
+shutdown=' Shutdown'
+reboot=' Reboot'
+lock=' Lock'
+suspend='󰏦 Suspend'
+logout='󰍃 Logout'
+yes='Yes'
+no='No'
+
+# Rofi CMD
+rofi_cmd() {
+	rofi -dmenu \
+		-theme ${dir}/${theme}.rasi
+}
+
+# Confirmation CMD
+confirm_cmd() {
+	rofi -theme-str 'window {location: center; anchor: center; fullscreen: false; width: 250px;}' \
+		-theme-str 'mainbox {children: [ "message", "listview" ];}' \
+		-theme-str 'listview {columns: 2; lines: 1;}' \
+		-theme-str 'element-text {horizontal-align: 0.5;}' \
+		-theme-str 'textbox {horizontal-align: 0.5;}' \
+		-dmenu \
+		-p 'Confirmation' \
+		-mesg 'Are you Sure?' \
+		-theme ${dir}/${theme}.rasi
+}
+
+# Ask for confirmation
+confirm_exit() {
+	echo -e "$yes\n$no" | confirm_cmd
+}
+
+# Pass variables to rofi dmenu
+run_rofi() {
+	echo -e "$lock\n$suspend\n$logout\n$reboot\n$shutdown" | rofi_cmd
+}
+
+# Execute Command
+run_cmd() {
+	selected="$(confirm_exit)"
+	if [[ "$selected" == "$yes" ]]; then
+		if [[ $1 == '--shutdown' ]]; then
+			systemctl poweroff -i
+		elif [[ $1 == '--reboot' ]]; then
+			systemctl reboot
+		elif [[ $1 == '--suspend' ]]; then
+			systemctl suspend
+		elif [[ $1 == '--logout' ]]; then
+			if [[ "$DESKTOP_SESSION" == 'i3' ]]; then
+				i3-msg exit
+			elif [[ ! -z $HYPRLAND_INSTANCE_SIGNATURE ]]; then
+				hyprctl dispatch exit
+			fi
+		fi
+	else
+		exit 0
+	fi
+}
+
+# Actions
+chosen="$(run_rofi)"
+case ${chosen} in
+    $shutdown)
+		run_cmd --shutdown
+        ;;
+    $reboot)
+		run_cmd --reboot
+        ;;
+    $lock)
+		if command -v i3lock-color; then
+			i3lock-color -c 808F85 && sleep 1
+		elif command -v hyprlock; then
+			hyprlock
+		fi
+        ;;
+    $suspend)
+		run_cmd --suspend
+        ;;
+    $logout)
+		run_cmd --logout
+        ;;
+esac

config/rofi/menus/wifi/wifi.rasi

@@ -0,0 +1,147 @@
+/**
+ *
+ * Author : Marc Sastre, based on Aditya Shakya (adi1090x, Github : @adi1090x)
+ *
+ **/
+
+@import "~/.config/rofi/theme.rasi"
+
+/*****----- Configuration -----*****/
+configuration {
+    show-icons:                 false;
+}
+
+/*****----- Main Window -----*****/
+window {
+    /* properties for window widget */
+    transparency:                "real";
+    location:                    center;
+    anchor:                      center;
+    fullscreen:                  false;
+    width:                       800px;
+    x-offset:                    0px;
+    y-offset:                    0px;
+
+    /* properties for all widgets */
+    enabled:                     true;
+    margin:                      0px;
+    padding:                     0px;
+    border:                      2px solid;
+    border-radius:               15px;
+    border-color:                @background-alt;
+    cursor:                      "default";
+    background-color:            @background;
+}
+
+/*****----- Main Box -----*****/
+mainbox {
+    enabled:                     true;
+    spacing:                     15px;
+    margin:                      0px;
+    padding:                     30px;
+    border:                      0px solid;
+    border-radius:               0px;
+    border-color:                @selected;
+    background-color:            transparent;
+    children:                    [ "inputbar", "listview" ];
+}
+message {
+    enabled:                     true;
+    margin:                      0px;
+    padding:                     10px;
+    border:                      0px solid;
+    border-radius:               10px;
+    border-color:                @selected;
+    background-color:            @background-alt;
+    text-color:                  @foreground;
+}
+textbox {
+    background-color:            inherit;
+    text-color:                  inherit;
+    vertical-align:              0.5;
+    horizontal-align:            0.0;
+    placeholder-color:           @foreground;
+    blink:                       true;
+    markup:                      true;
+}
+
+/*****----- Inputbar -----*****/
+inputbar {
+    enabled:                     true;
+    spacing:                     10px;
+    padding:                     15px;
+    border-radius:               10px;
+    background-color:            @background-alt;
+    text-color:                  @foreground;
+    children:                    [ "textbox-prompt-colon", "entry" ];
+}
+textbox-prompt-colon {
+    enabled:                     true;
+    expand:                      false;
+    str:                         "󰖩";
+    background-color:            inherit;
+    text-color:                  inherit;
+}
+entry {
+    enabled:                     true;
+    background-color:            inherit;
+    text-color:                  inherit;
+    cursor:                      text;
+}
+
+/*****----- Listview -----*****/
+listview {
+    enabled:                     true;
+    columns:                     1;
+    lines:                       5;
+    cycle:                       true;
+    dynamic:                     true;
+    scrollbar:                   false;
+    layout:                      vertical;
+    reverse:                     false;
+    fixed-height:                true;
+    fixed-columns:               true;
+
+    spacing:                     5px;
+    margin:                      0px;
+    padding:                     0px;
+    border:                      0px solid;
+    border-radius:               0px;
+    border-color:                @selected;
+    background-color:            transparent;
+    text-color:                  @foreground;
+    cursor:                      "default";
+}
+
+/*****----- Elements -----*****/
+element {
+    enabled:                     true;
+    spacing:                     0px;
+    margin:                      0px;
+    padding:                     12px;
+    border:                      0px solid;
+    border-radius:               100%;
+    border-color:                @selected;
+    background-color:            transparent;
+    text-color:                  @foreground;
+    cursor:                      pointer;
+}
+element-text {
+    background-color:            transparent;
+    text-color:                  inherit;
+    cursor:                      inherit;
+    vertical-align:              0.5;
+    horizontal-align:            0.0;
+}
+element selected.normal {
+    background-color:            var(selected);
+    text-color:                  var(background);
+}
+element active {
+    background-color:            var(active);
+    text-color:                  var(background);
+}
+element selected.active {
+    background-color:            var(selected);
+    text-color:                  var(background);
+}

config/rofi/menus/wifi/wifi.sh

@@ -0,0 +1,83 @@
+#!/usr/bin/env bash
+
+# Shamelessly stolen from https://github.com/zbaylin/rofi-wifi-menu
+
+# Starts a scan of available broadcasting SSIDs
+# nmcli dev wifi rescan
+
+
+# For debugging/development purposes
+# PREFIX=projects/samfelag/config/
+
+# Rofi command to pipe into, can add any options here
+dir="$HOME/$PREFIX.config/rofi/menus/wifi/"
+theme='wifi'
+
+rofi_command="rofi -dmenu -i -theme ${dir}/${theme}.rasi"
+
+FIELDS=SSID,SECURITY,BARS
+
+LIST=$(nmcli --fields "$FIELDS" device wifi list | sed '/^--/d')
+# Gives a list of known connections so we can parse it later
+KNOWNCON=$(nmcli connection show)
+# Really janky way of telling if there is currently a connection
+CONSTATE=$(nmcli -fields WIFI g)
+CURRSSID=$(LANGUAGE=C nmcli -t -f active,ssid dev wifi | awk -F: '$1 ~ /^yes/ {print $2}')
+
+if [[ ! -z $CURRSSID ]]; then
+	HIGHLINE=$(echo  "$(echo "$LIST" | awk -F "[  ]{2,}" '{print $1}' | grep -Fxn -m 1 "$CURRSSID" | awk -F ":" '{print $1}') + 1" | bc )
+fi
+
+if [[ "$CONSTATE" =~ "habilitat" ]]; then
+	TOGGLE="toggle off"
+elif [[ "$CONSTATE" =~ "deshabilitat" ]]; then
+	TOGGLE="toggle on"
+fi
+
+
+CHENTRY=$(echo -e "$TOGGLE\nmanual\n$LIST" | uniq -u | $rofi_command -p "Wi-Fi SSID: " -a "$HIGHLINE")
+#echo "$CHENTRY"
+CHSSID=$(echo "$CHENTRY" | sed  's/\s\{2,\}/\|/g' | awk -F "|" '{print $1}')
+#echo "$CHSSID"
+
+# If the user inputs "manual" as their SSID in the start window, it will bring them to this screen
+if [ "$CHENTRY" = "manual" ] ; then
+	# Manual entry of the SSID and password (if appplicable)
+	MSSID=$(echo "enter the SSID of the network (SSID,password)" | $rofi_command -p "Manual Entry: " -lines 1)
+	# Separating the password from the entered string
+	MPASS=$(echo "$MSSID" | awk -F "," '{print $2}')
+
+	#echo "$MSSID"
+	#echo "$MPASS"
+
+	# If the user entered a manual password, then use the password nmcli command
+	if [ "$MPASS" = "" ]; then
+		nmcli dev wifi con "$MSSID"
+	else
+		nmcli dev wifi con "$MSSID" password "$MPASS"
+	fi
+
+elif [ "$CHENTRY" = "toggle on" ]; then
+	nmcli radio wifi on
+
+elif [ "$CHENTRY" = "toggle off" ]; then
+	nmcli radio wifi off
+
+else
+
+	# If the connection is already in use, then this will still be able to get the SSID
+	if [ "$CHSSID" = "*" ]; then
+		CHSSID=$(echo "$CHENTRY" | sed  's/\s\{2,\}/\|/g' | awk -F "|" '{print $3}')
+	fi
+
+	# Parses the list of preconfigured connections to see if it already contains the chosen SSID. This speeds up the connection process
+	if [[ $(echo "$KNOWNCON" | grep "$CHSSID") = "$CHSSID" ]]; then
+		nmcli con up "$CHSSID"
+	else
+		if [[ "$CHENTRY" =~ "WPA2" ]] || [[ "$CHENTRY" =~ "WEP" ]]; then
+			WIFIPASS=$(echo "Enter password, if connection is stored, hit enter" | $rofi_command -p "Password: " -lines 1 )
+		fi
+		nmcli dev wifi con "$CHSSID" password "$WIFIPASS"
+	fi
+
+fi

config/shell/sh/002-aliases.sh

@@ -1,5 +1,5 @@
-[[ -x "$(command -v exa)" ]] && {
+[[ -x "$(command -v eza)" ]] && {
-  alias ll="exa --group-directories-first --color=auto --git -la"
+  alias ll="eza --group-directories-first --color=auto --icons=auto --git -la"
 } || {
   alias ll="ls -alh --color=always --group-directories-first"
 }

config/shell/zsh/002-fzf.zsh

@@ -0,0 +1,4 @@
+if [ -n "${commands[fzf-share]}" ]; then
+  source "$(fzf-share)/key-bindings.zsh"
+  source "$(fzf-share)/completion.zsh"
+fi

config/shell/zsh/003-p10k-fix.zsh

@@ -0,0 +1 @@
+unset ZSH_AUTOSUGGEST_USE_ASYNC 

config/shell/zsh/004-zoxide.zsh

@@ -0,0 +1 @@
+[[ -x "$(command -v zoxide)" ]] && eval "$(zoxide init --cmd cd zsh)"

data/devenv/devenv.sh

@@ -0,0 +1,93 @@
+#!/usr/bin/env sh
+
+SANDBOXES_DIR=$HOME/sandbox
+TEMPLATES_DIR=$XDG_DATA_HOME/devenv/templates
+
+list_templates() {
+    echo "The available templates are:"
+    ls $TEMPLATES_DIR
+}
+
+check_template () {
+    TEMPLATE=$1
+    if [ -z "$TEMPLATE" ]; then
+        echo "No template given"
+        list_templates
+        return 1
+    elif [ ! -e "$TEMPLATES_DIR/$TEMPLATE" ]; then
+        echo "The given template '$TEMPLATE' doesn't exist!"
+        list_templates
+        return 1
+    fi
+}
+
+devenv_install() {
+    TEMPLATE=$1
+    install -m 644 $TEMPLATES_DIR/$TEMPLATE/* ./
+    echo "use flake . --impure" > .envrc
+    direnv allow
+}
+
+devenv_init() {
+    TEMPLATE=$1
+    if ! check_template $TEMPLATE ; then
+        return 1
+    fi
+    devenv_install $TEMPLATE
+}
+
+devenv_sandbox() {
+    DIRECTORY=$1
+    if [ -z "$DIRECTORY" ]; then
+        show_help_sandbox
+        return 1
+    fi
+    SANDBOX_DIR="$SANDBOXES_DIR/$DIRECTORY"
+    TEMPLATE=$2
+    if [ -z "$TEMPLATE" ]; then
+        TEMPLATE=$DIRECTORY
+    fi
+    if ! check_template $TEMPLATE; then
+        return 1
+    fi
+    if [ ! -e $SANDBOX_DIR ]; then
+        echo "Creating sandbox at $SANDBOX_DIR with template $TEMPLATE"
+        mkdir -p $SANDBOX_DIR
+        cd $SANDBOX_DIR
+        devenv_init $TEMPLATE
+    else
+        cd $SANDBOX_DIR
+    fi
+}
+
+show_help_sandbox() {
+    echo "Usage: devenv sandbox <directory> [<template>]"
+    echo ""
+    echo "  directory: The sandbox directory to go to."
+    echo "  template: If the directory doesn't exist, the template to use for that sandbox"
+    echo "            Defaults to directory if not given."
+    echo ""
+}
+
+show_help() {
+    echo "Usage: devenv <action>"
+    echo "Available actions:"
+    echo ""
+    echo "  init: Initialize a dev env in the current directory"
+    echo "  sandbox: Go to a sandbox directory using a template"
+    echo ""
+}
+
+case "$1" in
+    init)
+        shift
+        devenv_init $@
+        ;;
+    sandbox)
+        shift
+        devenv_sandbox $@
+        ;;
+    *)
+        show_help
+        ;;
+esac

data/devenv/templates/clojure/flake.nix

@@ -0,0 +1,28 @@
+{
+  description = "Development flake for this clojure project";
+  inputs.nixpkgs.url = "github:NixOS/nixpkgs/nixpkgs-unstable";
+  inputs.flake-utils.url = "github:numtide/flake-utils";
+
+  outputs = { self, nixpkgs, flake-utils }:
+    flake-utils.lib.eachDefaultSystem (system: let
+
+      pkgs = nixpkgs.legacyPackages.${system};
+
+      projectDependencies = with pkgs; [
+      ];
+
+    in {
+      devShells.default = pkgs.mkShell {
+        nativeBuildInputs = [ pkgs.bashInteractive ];
+        buildInputs = with pkgs; [
+          # Core clojure dependencies
+          clojure
+          leiningen
+          # IDE tools
+          clojure-lsp
+          # Development tools
+        ] ++ projectDependencies;
+
+      };
+    });
+}

data/devenv/templates/python312/flake.nix

@@ -0,0 +1,37 @@
+{
+  description = "Development flake for this python project";
+  inputs.nixpkgs.url = "github:nixos/nixpkgs/nixos-24.05";
+  inputs.flake-utils.url = "github:numtide/flake-utils";
+
+  outputs = { self, nixpkgs, flake-utils }:
+    flake-utils.lib.eachDefaultSystem (system: let
+
+      pkgs = nixpkgs.legacyPackages.${system};
+
+      python = pkgs.python312;
+      pythonPackages = pkgs.python312Packages;
+
+      projectDependencies = with pythonPackages; [
+      ];
+
+    in {
+      devShells.default = pkgs.mkShell {
+        nativeBuildInputs = [ pkgs.bashInteractive ];
+        buildInputs = with pkgs; [
+          # Core python dependencies
+          python
+          pythonPackages.pip
+          pythonPackages.virtualenv
+          # IDE tools
+          pythonPackages.isort
+          nodePackages.pyright
+          # Development tools
+          black
+          pythonPackages.ipython
+          pythonPackages.pytest
+          pythonPackages.setuptools
+        ] ++ projectDependencies;
+
+      };
+    });
+}

data/devenv/templates/ros/flake.nix

@@ -0,0 +1,55 @@
+{
+  description = "Development flake for this ROS project";
+
+  inputs = {
+    nixpkgs.url = "github:NixOS/nixpkgs/nixpkgs-unstable";
+    flake-utils.url = "github:numtide/flake-utils";
+
+    ros-overlay.url = "github:lopsided98/nix-ros-overlay";
+    ros-overlay.inputs.nixpkgs.follows = "nixpkgs";
+  };
+
+
+  outputs = { self, nixpkgs, flake-utils, ros-overlay }:
+    flake-utils.lib.eachDefaultSystem (system: let
+
+      pkgs = import nixpkgs {
+        inherit system;
+        overlays = [ ros-overlay.overlays.default ];
+      };
+
+    in {
+      devShells.default = pkgs.mkShell {
+        nativeBuildInputs = with pkgs; [
+          # Non-ROS packages
+        ] ++ (with rosPackages.humble; [
+          # ROS packages
+          (buildEnv {
+            paths = [
+              # Core
+              ros-environment
+              colcon
+              # Ros2
+              ros2run
+              ros2param
+              ros2topic
+              ros2node
+              ros2interface
+              ros2service
+              ros2action
+              ros2pkg
+              # RQT
+              rqt
+              rqt-msg
+              rqt-topic
+              rqt-action
+              rqt-service-caller
+              rqt-graph
+              # Extra
+           ];
+          })
+        ]);
+
+      };
+    });
+}

data/devenv/templates/rust/Cargo.toml

@@ -0,0 +1,8 @@
+[package]
+name = ""
+version = "0.1.0"
+edition = "2021"
+
+# See more keys and their definitions at https://doc.rust-lang.org/cargo/reference/manifest.html
+
+[dependencies]

data/devenv/templates/rust/flake.nix

@@ -0,0 +1,32 @@
+{
+  description = "Development flake for this rust project";
+  inputs.nixpkgs.url = "github:NixOS/nixpkgs/nixpkgs-unstable";
+  inputs.flake-utils.url = "github:numtide/flake-utils";
+
+  outputs = { self, nixpkgs, flake-utils }:
+    flake-utils.lib.eachDefaultSystem (system: let
+
+      pkgs = nixpkgs.legacyPackages.${system};
+
+      projectDependencies = with pkgs; [
+      ];
+
+    in {
+      devShells.default = pkgs.mkShell {
+        nativeBuildInputs = [ pkgs.bashInteractive ];
+        buildInputs = with pkgs; [
+          # Core rust dependencies
+          rustc
+          cargo
+          # Development tools
+          rustfmt
+          rust-analyzer
+          clippy
+        ] ++ projectDependencies;
+
+        LD_LIBRARY_PATH = nixpkgs.lib.makeLibraryPath projectDependencies;
+
+        RUST_BACKTRACE = 1;
+      };
+    });
+}

data/nomad/caddy.nomad

@@ -0,0 +1,100 @@
+job "caddy" {
+  region      = "global"
+  datacenters = ["samfelag"]
+  type        = "service"
+
+  group "caddy" {
+    count = 1
+
+    volume "caddyfile" {
+      type      = "host"
+      read_only = false
+      source    = "caddyfile"
+    }
+
+    volume "caddy-data" {
+      type      = "host"
+      read_only = false
+      source    = "caddy-data"
+    }
+
+    restart {
+      attempts = 2
+      interval = "2m"
+      delay    = "1m"
+      mode     = "fail"
+    }
+
+    network {
+      port "http" {
+        static       = 80
+        to           = 80
+	    host_network = "public"
+      }
+
+      port "https" {
+        static       = 443
+        to           = 443
+	    host_network = "public"
+      }
+
+      port "config" {
+        static = 2019
+        to     = 2019
+      }
+
+      dns {
+        servers = ["100.80.195.56"]
+      }
+    }
+
+    ###
+    # CADDY
+    ###
+
+    task "caddy" {
+      driver = "docker"
+
+      volume_mount {
+        volume      = "caddyfile"
+        destination = "/etc/caddy/Caddyfile"
+        read_only   = false
+      }
+
+      volume_mount {
+        volume      = "caddy-data"
+        destination = "/data"
+        read_only   = false
+      }
+
+      env {
+      }
+
+      config {
+        image = "caddy:2.3.0-alpine"
+        ports = ["http", "https", "config"]
+	    volumes = [
+          "/mnt/vatnajokull/lajuntament-web:/sites/lajuntament-web",
+          "/mnt/vatnajokull/folkugat-web:/sites/folkugat-web",
+        ]
+      }
+
+      resources {
+        cpu    = 500
+        memory = 128
+      }
+
+      service {
+        name = "caddy"
+       
+        check {
+          type     = "tcp"
+          port     = "http"
+          interval = "30s"
+          timeout  = "2s"
+        }
+      }
+    }
+  }
+}
+

data/nomad/dns.nomad

@@ -0,0 +1,112 @@
+job "dns" {
+  region      = "global"
+  datacenters = ["samfelag"]
+  type        = "service"
+
+  group "dns" {
+    count = 1
+
+    restart {
+      attempts = 10
+      delay    = "15s"
+    }
+
+    # VOLUMES
+    ## pihole
+
+    volume "pihole" {
+      type      = "host"
+      read_only = false
+      source    = "dns-pihole"
+    }
+
+    volume "dnsmasq" {
+      type      = "host"
+      read_only = false
+      source    = "dns-dnsmasq"
+    }
+
+    ## unbound
+
+    volume "unbound" {
+      type      = "host"
+      read_only = false
+      source    = "dns-unbound"
+    }
+
+    # NETWORK
+
+    network {
+      port "dns" {
+        static = 53
+      }
+      port "http" {
+        to = 80
+      }
+      port "unbound" {
+        static = 5533
+      }
+    }
+
+    # TASKS
+
+    task "pihole" {
+      driver = "docker"
+
+      volume_mount {
+        volume      = "pihole"
+        destination = "/etc/pihole"
+        read_only   = false
+      }
+
+      volume_mount {
+        volume      = "dnsmasq"
+        destination = "/etc/dnsmasq.d"
+        read_only   = false
+      }
+
+      env {
+        TZ          = "Europe/Amsterdam"
+        WEBPASSWORD = "elbonfeix"
+        ServerIP    = "100.80.195.56"
+      }
+
+      config {
+        image = "pihole/pihole:v5.7"
+        ports = ["dns", "http"]
+      }
+
+      resources {
+        cpu    = 100
+        memory = 32
+      }
+
+      service {
+        name = "pihole-gui"
+        port = "http"
+      }
+    }
+
+    task "unbound" {
+      driver = "docker"
+
+      volume_mount {
+        volume      = "unbound"
+        destination = "/opt/unbound/etc/unbound/"
+        read_only   = false
+      }
+
+      config {
+        image = "mvance/unbound:latest"
+        ports = ["unbound"]
+      }
+
+      resources {
+        cpu    = 50
+        memory = 32
+      }
+    }
+
+  }
+}
+

data/nomad/folkugat.nomad

@@ -0,0 +1,62 @@
+job "folkugat" {
+  region      = "global"
+  datacenters = ["samfelag"]
+  type        = "service"
+
+  group "folkugat" {
+    count = 1
+
+    restart {
+      attempts = 5
+      delay    = "15s"
+    }
+
+    network {
+      port "http" {
+        to = 80
+      }
+    }
+
+    # Volumes
+
+    volume "folkugat" {
+      type      = "host"
+      read_only = false
+      source    = "folkugat"
+    }
+
+    # FOLKUGAT WEB
+    task "folkugat" {
+      driver = "docker"
+
+      env {
+          JWT_SECRET = "12345"
+          ADMIN_PASSWORD = "banshee"
+          URL_SCHEME = "https"
+          DB_DIR = "/folkugat/db"
+      }
+
+      config {
+        image = "marc.sastre.cat/folkugat-web:latest"
+        ports = ["http"]
+      }
+
+      volume_mount {
+        volume      = "folkugat"
+        destination = "/folkugat/db"
+        read_only   = false
+      }
+
+      resources {
+        cpu    = 100
+        memory = 512
+      }
+
+      service {
+        name = "folkugat"
+        port = "http"
+      }
+    }
+  }
+}
+

data/nomad/gitea.nomad

@@ -0,0 +1,71 @@
+job "gitea" {
+  region      = "global"
+  datacenters = ["samfelag"]
+  type        = "service"
+
+  group "gitea" {
+    count = 1
+
+    restart {
+      attempts = 5
+      delay    = "1m"
+    }
+
+    network {
+      port "http" {
+        to     = 3000
+      }
+      port "ssh" {
+        static       = 2222
+        to           = 22
+	    host_network = "public"
+      }
+    }
+
+    task "gitea" {
+      driver = "docker"
+
+      env {
+        USER_UID   = "1001"
+        USER_GID   = "1001"
+      }
+
+      config {
+        image = "gitea/gitea:latest"
+        ports = ["http", "ssh"]
+	    volumes = ["/mnt/vatnajokull/nomad_volumes/gitea/data:/data"]
+      }
+
+      resources {
+        cpu    = 1000
+        memory = 400
+      }
+
+      service {
+        name = "gitea"
+        port = "http"
+       
+        check {
+          type     = "tcp"
+          port     = "http"
+          interval = "30s"
+          timeout  = "2s"
+        }
+      }
+
+      service {
+        name = "gitea-ssh"
+        port = "ssh"
+
+        check {
+          type     = "tcp"
+          port     = "ssh"
+          interval = "30s"
+          timeout  = "2s"
+        }
+      }
+
+    }
+  }
+}
+

data/nomad/nextcloud.nomad

@@ -0,0 +1,188 @@
+job "nextcloud" {
+  region      = "global"
+  datacenters = ["samfelag"]
+  type        = "service"
+
+  group "nextcloud" {
+    count = 1
+
+    restart {
+      attempts = 5
+      delay    = "1m"
+    }
+
+    # Network
+
+    network {
+      port "nextcloud" {
+        static = 8080
+        to     = 80
+      }
+      port "mariadb" {
+        static = 3306
+        to     = 3306
+      }
+      # port "collabora" {
+      #   to     = 9980
+      # }
+    }
+
+    # Volumes
+
+    volume "nextcloud" {
+      type      = "host"
+      read_only = false
+      source    = "nextcloud"
+    }
+
+    volume "mariadb" {
+      type      = "host"
+      read_only = false
+      source    = "mariadb"
+    }
+
+    # volume "collabora" {
+    #   type      = "host"
+    #   read_only = false
+    #   source    = "collabora"
+    # }
+
+    ###
+    # NEXTCLOUD
+    ###
+
+    task "nextcloud" {
+      driver = "docker"
+
+      user = 1001
+
+      env {
+        MYSQL_PASSWORD            = "hxKOD13MUh"
+        MYSQL_DATABASE            = "nextcloud"
+        MYSQL_USER                = "nextcloud"
+        MYSQL_HOST                = "${NOMAD_ADDR_mariadb}"
+        NEXTCLOUD_TRUSTED_DOMAINS = "nextcloud.samfelag.xyz"
+        OVERWRITEPROTOCOL         = "https"
+      }
+
+      volume_mount {
+        volume      = "nextcloud"
+        destination = "/var/www/html"
+        read_only   = false
+      }
+
+      config {
+        image = "nextcloud:latest"
+        ports = ["nextcloud"]
+      }
+
+      resources {
+        cpu    = 2000
+        memory = 512
+      }
+
+      service {
+        name = "nextcloud"
+        port = "nextcloud"
+       
+        check {
+          type     = "tcp"
+          port     = "nextcloud"
+          interval = "30s"
+          timeout  = "2s"
+        }
+      }
+    }
+
+    ###
+    # MARIADB
+    ###
+
+    task "mariadb" {
+      driver = "docker"
+
+      user = 1001
+
+      env {
+        MYSQL_ROOT_PASSWORD = "hxKOD13MUh"
+        MYSQL_ROOT_HOST     = "${NOMAD_IP_mariadb}"
+        MYSQL_PASSWORD      = "hxKOD13MUh"
+        MYSQL_DATABASE      = "nextcloud"
+        MYSQL_USER          = "nextcloud"
+      }
+
+      volume_mount {
+        volume      = "mariadb"
+        destination = "/var/lib/mysql"
+        read_only   = false
+      }
+
+      config {
+        image = "mariadb:10.5"
+        ports = ["mariadb"]
+      }
+
+      resources {
+        cpu    = 1000
+        memory = 256
+      }
+
+      service {
+        name = "mariadb"
+        tags = ["mariadb"]
+
+        port = "mariadb"
+
+        check {
+          type     = "tcp"
+          port     = "mariadb"
+          interval = "30s"
+          timeout  = "2s"
+        }
+      }
+    }
+
+    ###
+    # COLLABORA
+    ###
+
+    # task "collabora" {
+    #   driver = "docker"
+
+    #   env {
+    #       aliasgroup1 	= "https://nextcloud.lajuntament.space:443"
+    #       username  	= "lajuntament"
+    #       password  	= "eLn1lIm4rc"
+    #   }
+
+    #   volume_mount {
+    #     volume      = "collabora"
+    #     destination = "/etc/loolwsd"
+    #     read_only   = false
+    #   }
+
+    #   config {
+    #     image = "collabora/code:latest"
+    #     ports = ["collabora"]
+    #   }
+
+    #   resources {
+    #     cpu    = 2000
+    #     memory = 1024
+    #   }
+
+    #   service {
+    #     name = "collabora"
+    #     port = "collabora"
+
+    #     check {
+    #       type     = "tcp"
+    #       port     = "collabora"
+    #       interval = "30s"
+    #       timeout  = "2s"
+    #     }
+    #   }
+
+    # }
+  }
+}

data/nomad/old/collabora.nomad

@@ -0,0 +1,67 @@
+job "collabora" {
+  region      = "global"
+  datacenters = ["samfelag"]
+  type        = "service"
+
+  group "collabora" {
+    count = 1
+
+    restart {
+      attempts = 5
+      delay    = "1m"
+    }
+
+    network {
+      port "http" {
+        to     = 9980
+      }
+    }
+
+    volume "collabora" {
+      type      = "host"
+      read_only = false
+      source    = "collabora"
+    }
+
+    task "collabora" {
+      driver = "docker"
+
+      env {
+          domain    	= "nextcloud\\.lajuntament\\.space"
+          username  	= "lajuntament"
+          password  	= "eLn1lIm4rc"
+          extra_params	= "--o:ssl.enable=false"
+      }
+
+      volume_mount {
+        volume      = "collabora"
+        destination = "/etc/loolwsd"
+        read_only   = false
+      }
+
+      config {
+        image = "collabora/code:latest"
+        ports = ["http"]
+      }
+
+      resources {
+        cpu    = 1500
+        memory = 1024
+      }
+
+      service {
+        name = "collabora"
+        port = "http"
+       
+        check {
+          type     = "tcp"
+          port     = "http"
+          interval = "30s"
+          timeout  = "2s"
+        }
+      }
+
+    }
+  }
+}
+

data/nomad/old/cua-quinto.nomad

@@ -0,0 +1,46 @@
+job "cua-quinto" {
+  region      = "global"
+  datacenters = ["samfelag"]
+  type        = "service"
+
+  group "cua-quinto" {
+    count = 1
+
+    restart {
+      attempts = 5
+      delay    = "15s"
+    }
+
+    network {
+      port "http" {
+        to = 80
+      }
+    }
+
+    # CUA-QUINTO APP
+    task "cua-quinto" {
+      driver = "docker"
+
+      env {
+	      API_PREFIX = "/cua-quinto"
+	      API_SCHEME = "https"
+      }
+
+      config {
+        image = "marc.sastre.cat/quinto-cua:latest"
+        ports = ["http"]
+      }
+
+      resources {
+        cpu    = 50
+        memory = 64
+      }
+
+      service {
+        name = "cua-quinto"
+        port = "http"
+      }
+    }
+  }
+}
+

data/nomad/old/lwt.nomad

@@ -0,0 +1,106 @@
+job "lwt" {
+  region      = "global"
+  datacenters = ["samfelag"]
+  type        = "service"
+
+  group "lwt" {
+    count = 1
+
+    restart {
+      attempts = 10
+      delay    = "30s"
+    }
+
+    # VOLUMES
+
+    volume "lwt-mariadb" {
+      type      = "host"
+      read_only = false
+      source    = "lwt-mariadb"
+    }
+
+    volume "lwt" {
+      type      = "host"
+      read_only = false
+      source    = "lwt"
+    }
+
+    # NETWORK
+
+    network {
+      port "lwt" {
+        to = 80
+      }
+      port "mariadb" {
+        static = 33306
+        to = 3306
+      }
+    }
+
+    # TASKS
+
+    task "mariadb" {
+      driver = "docker"
+
+      user = 1001
+
+      volume_mount {
+        volume      = "lwt-mariadb"
+        destination = "/var/lib/mysql"
+        read_only   = false
+      }
+
+      env {
+        MYSQL_ALLOW_EMPTY_PASSWORD = "no"
+        MYSQL_ROOT_PASSWORD = "root"
+      }
+
+      config {
+        image = "mariadb:10.7"
+        ports = ["mariadb"]
+      }
+
+      resources {
+        cpu    = 100
+        memory = 128
+      }
+    }
+
+    task "lwt" {
+      driver = "docker"
+
+      config {
+        image = "ghcr.io/hugofara/lwt:master"
+        ports = ["lwt"]
+      }
+
+      volume_mount {
+        volume      = "lwt"
+        destination = "/var/www/html/media"
+        read_only   = false
+      }
+
+      env {
+        DB_HOST      = "${attr.unique.network.ip-address}:33306" # "100.91.225.117"
+      }
+
+      resources {
+        cpu    = 100
+        memory = 128
+      }
+
+      service {
+        name = "lwt"
+        port = "lwt"
+
+        check {
+          type     = "tcp"
+          port     = "lwt"
+          interval = "30s"
+          timeout  = "10s"
+        }
+      }
+    }
+
+  }
+}

data/nomad/old/minecraft.nomad

@@ -0,0 +1,71 @@
+job "minecraft" {
+  region      = "global"
+  datacenters = ["samfelag"]
+  type        = "service"
+
+  group "minecraft" {
+    count = 1
+
+    volume "minecraft" {
+      type      = "host"
+      read_only = false
+      source    = "minecraft"
+    }
+
+    restart {
+      attempts = 2
+      interval = "2m"
+      delay    = "1m"
+      mode     = "fail"
+    }
+
+    network {
+      port "server" {
+        static       = 25565
+        to           = 25565
+	host_network = "minecraft"
+      }
+    }
+
+    ###
+    # MINECRAFT SERVER
+    ###
+
+    task "minecraft" {
+      driver = "docker"
+
+      volume_mount {
+        volume      = "minecraft"
+        destination = "/data"
+        read_only   = false
+      }
+
+      env {
+        EULA = "TRUE"
+        TZ   = "Europe/Madrid"
+      }
+
+      config {
+        image = "itzg/minecraft-server"
+        ports = ["server"]
+      }
+
+      resources {
+        cpu    = 2800
+        memory = 1900
+      }
+
+      service {
+        name = "minecraft"
+       
+        check {
+          type     = "tcp"
+          port     = "server"
+          interval = "30s"
+          timeout  = "2s"
+        }
+      }
+    }
+  }
+}
+

data/nomad/old/moimoin.nomad

@@ -0,0 +1,133 @@
+job "moimoin" {
+  region      = "global"
+  datacenters = ["samfelag"]
+  type        = "service"
+
+  group "moimoin" {
+    count = 1
+
+    restart {
+      attempts = 10
+      delay    = "30s"
+    }
+
+    # VOLUMES
+
+    volume "mysql" {
+      type      = "host"
+      read_only = false
+      source    = "moimoin"
+    }
+
+    # NETWORK
+
+    network {
+      port "moimoin-front" {
+        to = 5000
+      }
+      port "moimoin-back" {
+        to = 3000
+      }
+      port "mysql" {
+        static = 33306
+        to = 3306
+      }
+    }
+
+    # TASKS
+
+    task "mysql" {
+      driver = "docker"
+
+      user = 1001
+
+      volume_mount {
+        volume      = "mysql"
+        destination = "/var/lib/mysql"
+        read_only   = false
+      }
+
+      env {
+        MYSQL_DATABASE = "xat-osr"
+        MYSQL_ROOT_PASSWORD = "estrell4galicia"
+      }
+
+      config {
+        image = "arm64v8/mysql:latest"
+        ports = ["mysql"]
+      }
+
+      resources {
+        cpu    = 500
+        memory = 512
+      }
+    }
+
+    task "moimoin-back" {
+      driver = "docker"
+
+      config {
+        image = "marc.sastre.cat/moimoin-back:latest"
+        ports = ["moimoin-back"]
+      }
+
+      env {
+        MYSQL_HOST      = "${attr.unique.network.ip-address}" # "100.91.225.117"
+        MYSQL_PORT      = "33306"
+        MYSQL_USER      = "root"
+        MYSQL_PASSWORD  = "estrell4galicia"
+        MYSQL_NAME      = "xat-osr"
+        CHAT_ADMIN_PSWD = "cervesaEspecial"
+        CLIENT_HOST     = "marc.sastre.cat/moimoin"
+      }
+
+      resources {
+        cpu    = 100
+        memory = 128
+      }
+
+      service {
+        name = "moimoin-back"
+        port = "moimoin-back"
+
+        check {
+          type     = "tcp"
+          port     = "moimoin-back"
+          interval = "30s"
+          timeout  = "10s"
+        }
+      }
+    }
+
+    task "moimoin-front" {
+      driver = "docker"
+
+      config {
+        image = "marc.sastre.cat/moimoin-front:latest"
+        ports = ["moimoin-front"]
+      }
+
+      env {
+        CLIENT_PORT = "5000"
+      }
+
+      resources {
+        cpu    = 100
+        memory = 128
+      }
+
+      service {
+        name = "moimoin-front"
+        port = "moimoin-front"
+
+        check {
+          type     = "tcp"
+          port     = "moimoin-front"
+          interval = "30s"
+          timeout  = "10s"
+        }
+      }
+    }
+
+  }
+}

data/nomad/old/organice.nomad

@@ -0,0 +1,52 @@
+job "organice" {
+  region      = "global"
+  datacenters = ["samfelag"]
+  type        = "service"
+
+  group "organice" {
+    count = 1
+
+    restart {
+      attempts = 5
+      delay    = "1m"
+    }
+
+    network {
+      port "http" {
+        to     = 5000
+      }
+    }
+
+    task "organice" {
+      driver = "docker"
+
+      env {
+        ORGANICE_WEBDAV_URL = "https://nextcloud.lajuntament.space/remote.php/dav/files/marc/"
+      }
+
+      config {
+        image = "twohundredok/organice:latest"
+        ports = ["http"]
+      }
+
+      resources {
+        cpu    = 100
+        memory = 128
+      }
+
+      service {
+        name = "organice"
+        port = "http"
+       
+        check {
+          type     = "tcp"
+          port     = "http"
+          interval = "30s"
+          timeout  = "2s"
+        }
+      }
+
+    }
+  }
+}
+

data/nomad/old/pasta.nomad

@@ -0,0 +1,70 @@
+job "pasta" {
+  region      = "global"
+  datacenters = ["samfelag"]
+  type        = "service"
+
+  group "pasta" {
+    count = 1
+
+    restart {
+      attempts = 5
+      delay    = "15s"
+    }
+
+    network {
+      port "backend" {
+        to = 3000
+      }
+      port "client" {
+        to = 80
+      }
+    }
+
+    # PASTA SERVER
+    task "pasta-server" {
+      driver = "docker"
+
+      env {
+        PASTA_PORT = "3000"
+        PASTA_DIR  = "/pasta"
+      }
+
+      config {
+        image = "marc.sastre.cat/pasta-server"
+        ports = ["backend"]
+	    volumes = ["/mnt/vatnajokull/nomad_volumes/pasta:/pasta"]
+      }
+
+      resources {
+        cpu    = 100
+        memory = 256
+      }
+
+      service {
+        name = "pasta-server"
+        port = "backend"
+      }
+    }
+
+    # PASTA CLIENT
+    task "pasta-client" {
+      driver = "docker"
+
+      config {
+        image = "marc.sastre.cat/pasta-client"
+        ports = ["client"]
+      }
+
+      resources {
+        cpu    = 50
+        memory = 32
+      }
+
+      service {
+        name = "pasta-client"
+        port = "client"
+      }
+    }
+  }
+}
+

data/nomad/old/pihole.nomad

@@ -0,0 +1,73 @@
+job "pihole" {
+  region      = "global"
+  datacenters = ["samfelag"]
+  type        = "service"
+
+  group "pihole" {
+    count = 1
+
+    volume "pihole" {
+      type      = "host"
+      read_only = false
+      source    = "dns-pihole"
+    }
+
+    volume "dnsmasq" {
+      type      = "host"
+      read_only = false
+      source    = "dns-dnsmasq"
+    }
+
+    restart {
+      attempts = 5
+      delay    = "15s"
+    }
+
+    network {
+      port "dns" {
+        static = 53
+      }
+      port "http" {
+        to = 80
+      }
+    }
+
+    task "pihole" {
+      driver = "docker"
+
+      volume_mount {
+        volume      = "pihole"
+        destination = "/etc/pihole"
+        read_only   = false
+      }
+
+      volume_mount {
+        volume      = "dnsmasq"
+        destination = "/etc/dnsmasq.d"
+        read_only   = false
+      }
+
+      env {
+        TZ          = "Europe/Amsterdam"
+        WEBPASSWORD = "elbonfeix"
+        ServerIP    = "100.107.148.47"
+      }
+
+      config {
+        image = "pihole/pihole:v5.7"
+        ports = ["dns", "http"]
+      }
+
+      resources {
+        cpu    = 100
+        memory = 64
+      }
+
+      service {
+        name = "pihole-gui"
+        port = "http"
+      }
+    }
+  }
+}
+

data/nomad/old/presencia.nomad

@@ -0,0 +1,41 @@
+job "presencia" {
+  region      = "global"
+  datacenters = ["samfelag"]
+  type        = "service"
+
+  group "presencia" {
+    count = 1
+
+    restart {
+      attempts = 5
+      delay    = "15s"
+    }
+
+    network {
+      port "http" {
+        to = 5000
+      }
+    }
+
+    # PRESENCIA APP
+    task "presencia" {
+      driver = "docker"
+
+      config {
+        image = "marc.sastre.cat/presencia"
+        ports = ["http"]
+      }
+
+      resources {
+        cpu    = 50
+        memory = 64
+      }
+
+      service {
+        name = "presencia"
+        port = "http"
+      }
+    }
+  }
+}
+

data/nomad/old/unbound.nomad

@@ -0,0 +1,47 @@
+job "unbound" {
+  region      = "global"
+  datacenters = ["samfelag"]
+  type        = "service"
+
+  group "unbound" {
+    count = 1
+
+    volume "unbound" {
+      type      = "host"
+      read_only = false
+      source    = "dns-unbound"
+    }
+
+    restart {
+      attempts = 5
+      delay    = "15s"
+    }
+
+    network {
+      port "dns" {
+        static = 5533
+      }
+    }
+
+    task "unbound" {
+      driver = "docker"
+
+      volume_mount {
+        volume      = "unbound"
+        destination = "/opt/unbound/etc/unbound/"
+        read_only   = false
+      }
+
+      config {
+        image = "mvance/unbound:latest"
+        ports = ["dns"]
+      }
+
+      resources {
+        cpu    = 50
+        memory = 64
+      }
+    }
+  }
+}
+

data/nomad/old/webhooks.nomad

@@ -0,0 +1,52 @@
+job "webhooks" {
+  region      = "global"
+  datacenters = ["samfelag"]
+  type        = "service"
+
+  group "webhooks" {
+    count = 1
+
+    restart {
+      attempts = 5
+      delay    = "1m"
+    }
+
+    network {
+      port "http" {
+        to     = 6000
+      }
+    }
+
+    task "webhooks" {
+      driver = "docker"
+
+      env {
+          CONFIG_FILE = "/app/data/config.json"
+      }
+
+      config {
+        image = "marc.sastre.cat/webhooks:latest"
+        ports = ["http"]
+	    volumes = ["/mnt/vatnajokull/nomad_volumes/webhooks:/app/data"]
+      }
+
+      resources {
+        cpu    = 100
+        memory = 128
+      }
+
+      service {
+        name = "webhooks"
+        port = "http"
+
+        check {
+          type     = "tcp"
+          port     = "http"
+          interval = "30s"
+          timeout  = "2s"
+        }
+      }
+    }
+  }
+}
+

data/nomad/registry.nomad

@@ -0,0 +1,52 @@
+job "registry" {
+  region      = "global"
+  datacenters = ["samfelag"]
+  type        = "service"
+
+  group "registry" {
+    count = 1
+
+    restart {
+      attempts = 5
+      delay    = "1m"
+    }
+
+    network {
+      port "http" {
+        to     = 5000
+      }
+    }
+
+    task "registry" {
+      driver = "docker"
+
+      env {
+	      REGISTRY_STORAGE_FILESYSTEM_ROOTDIRECTORY = "/data"
+      }
+
+      config {
+        image = "registry:2"
+        ports = ["http"]
+	    volumes = ["/mnt/vatnajokull/nomad_volumes/registry:/data"]
+      }
+
+      resources {
+        cpu    = 100
+        memory = 256
+      }
+
+      service {
+        name = "registry"
+        port = "http"
+
+        check {
+          type     = "tcp"
+          port     = "http"
+          interval = "30s"
+          timeout  = "2s"
+        }
+      }
+    }
+  }
+}
+