Added screenshots module

README.org

@@ -1,93 +1,13 @@
-* Installing
-
-** Fresh system (nixos USB drive)
-
-1. Open a nix-shell with git:
+* NixOS
+** [[file:docs/install.org][Installing]]
+*** Rebuilding
 #+BEGIN_SRC bash
-nix-shell -p git
-#+END_SRC
-
-1. Clone the flake
-#+BEGIN_SRC bash
-git clone https://git.lajuntament.space/marc/samfelag.git
-#+END_SRC
-
-1. Partition the disk
-  1. Locate the disk
-  #+BEGIN_SRC bash
-  lsblk
-  #+END_SRC
-
-  1. Create a GPT partition table
-  #+BEGIN_SRC bash
-  sudo parted /dev/nvme0n1 -- mklabel gpt
-  #+END_SRC
-
-  1. Create the root partition
-  #+BEGIN_SRC bash
-  sudo parted /dev/nvme0n1 -- mkpart primary 512MB -8GB
-  #+END_SRC
-
-  1. Create the swap partition
-  #+BEGIN_SRC bash
-  sudo parted /dev/nvme0n1 -- mkpart primary linux-swap -8GB 100%
-  #+END_SRC
-
-  1. Create the boot partition
-  #+BEGIN_SRC bash
-  sudo parted /dev/nvme0n1 -- mkpart ESP fat32 1MB 512MB
-  sudo parted /dev/nvme0n1 -- set 3 esp on
-  #+END_SRC
-
-1. Format the partitions
-  1. Root partition
-  #+BEGIN_SRC bash
-  sudo mkfs.ext4 -L nixos /dev/nvme0n1p1
-  #+END_SRC
-  
-  1. Swap partition
-  #+BEGIN_SRC bash
-  sudo mkswap -L swap /dev/nvme0n1p2
-  #+END_SRC
-
-  1. Boot partition
-  #+BEGIN_SRC bash
-  sudo mkfs.fat -F 32 -n BOOT /dev/nvme0n1p3
-  #+END_SRC
-
-1. Mount the filesystems
-  1. Root partition
-  #+BEGIN_SRC bash
-  sudo mount /dev/disk/by-label/nixos /mnt
-  #+END_SRC
-  
-  1. Boot partition
-  #+BEGIN_SRC bash
-  sudo mkdir -p /mnt/boot
-  sudo mount /dev/disk/by-label/BOOT /mnt/boot
-  #+END_SRC
-
-  1. Swap partition (if needed)
-  #+BEGIN_SRC bash
-  sudo swapon /dev/disk/by-label/swap
-  #+END_SRC
-
-1. Create the host nix configuration
-If the host is not present under system/hosts, create a new folder for the host.
-Generate the hardware configuration file, you can use nixos-generate-config as a base:
-
-#+BEGIN_SRC bash
-nixos-generate-config --dir <<host directory>> --no-filesystems
-#+END_SRC
-
-1. Install nixos!
-
-#+BEGIN_SRC bash
-sudo nixos-install --impure --root /mnt --flake .#reykjavik
-#+END_SRC
-
-1. Set up the user
-You'll set the root password during the installation. You can then reboot and use the installed OS. First thing you'll have to do is log in as root and set the password for your user:
-#+BEGIN_SRC bash
-passwd marc
+sudo nixos-rebuild switch --impure --flake ".#${HOST}"
 #+END_SRC
+** Modules
+*** Desktop environment
+**** Themeing
+We use [[https://github.com/Misterio77/nix-colors][nix-colors]] to (try to) keep a consistent theme across all applications. This uses [[https://github.com/chriskempson/base16][base-16 themes]] (here is a [[https://github.com/chriskempson/base16/blob/main/styling.md][styiling guide]] for it).
+* Samfelag Mesh
+** [[file:docs/hosts.org][Hosts]]
+** [[file:docs/consul.org][Consul]]

config/.config/alacritty/alacritty.yml

@@ -1,7 +0,0 @@
-window:
-  opacity: 0.85
-font:
-  size: 8
-  normal:
-    family: Iosevka Nerd Font
-    style: Regular

config/.config/polybar/bars/bars.ini

@@ -1,51 +0,0 @@
-include-file = colours.ini
-include-directory = modules
-
-[bar/base]
-dpi      = 96
-width    = 100%
-height   = 32
-offset-x = 0
-offset-y = 0
-
-font-0 = "Iosevka:size=10;2"
-font-1 = "Iosevka:size=16;2"
-font-2 = "Iosevka:size=22;4"
-
-background = ${colours.trans}
-foreground = ${colours.white}
-
-border-bottom-size  = 5
-border-top-size     = 5
-
-border-left-size  = 10
-border-right-size = 10
-
-border-bottom-colour = ${colours.trans}
-border-top-colour    = ${colours.trans}
-
-border-left-colour  = ${colours.trans}
-border-right-colour = ${colours.trans}
-
-spacing            = 0
-padding-left       = 0
-padding-right      = 0
-module-margin-left = 0
-
-[bar/bottom]
-inherit = bar/base
-bottom = true
-
-modules-left  = workspaces 
-modules-right = volume paddinglite battery
-
-tray-position = center
-tray-maxsize = 28
-
-[bar/top]
-inherit = bar/base
-bottom = false
-
-modules-left  =  
-modules-center = date
-modules-right = i3-mode

config/.config/polybar/bars/colours.ini

@@ -1,61 +0,0 @@
-[colours]
-trans = #0000
-white = #fff
-black = #000
-gray = #555
-
-blue- = #498AD4
-blue  = #2B6CB6
-blue+ = #173B63
-
-xanadu- = #B3BCB6
-xanadu  = #808F85
-xanadu+ = #606C64
-
-green- = #CAE2CE
-green  = #91C499
-green+ = #61A86D
-
-linen- = #F9F5F0
-linen  = #F2E9DC
-linen+ = #DEC6A6
-
-pear- = #E8EB5C
-pear  = #CFD11A
-pear+ = #8F9112
-
-orange- = #FEB548
-orange  = #F18F01
-orange+ = #A26201
-
-[colours/date]
-bg = ${colours.pear}
-fg = ${colours.gray}
-
-[colours/battery]
-full-bg = ${colours.green+}
-full-fg = ${colours.gray} 
-charging-bg = ${colours.green}
-charging-fg = ${colours.gray} 
-discharging-bg = ${colours.green}
-discharging-fg = ${colours.gray} 
-low-bg = ${colours.orange}
-low-fg = ${colours.gray} 
-
-[colours/workspaces]
-focused-bg = ${colours.linen+}
-focused-fg = ${colours.gray}
-unfocused-bg = ${colours.linen}
-unfocused-fg = ${colours.gray}
-urgent-bg = ${colours.orange-}
-urgent-fg = ${colours.gray}
-
-[colours/i3-mode]
-bg = ${colours.orange}
-fg = ${colours.gray}
-
-[colours/volume]
-volume-bg = ${colours.blue}
-volume-fg = ${colours.white}
-muted-bg = ${colours.blue-}
-muted-fg = ${colours.white}

config/.config/polybar/bars/modules/padding.ini

@@ -1,13 +0,0 @@
-[module/padding]
-type               = custom/text
-content            = ||
-content-padding    = 1
-content-foreground = ${colours.trans}
-content-background = ${colours.trans}
-
-[module/paddinglite]
-type               = custom/text
-content            = |
-content-padding    = .5
-content-foreground = ${colours.trans}
-content-background = ${colours.trans}

config/.config/polybar/config.ini

@@ -1 +0,0 @@
-include-file = bars/bars.ini

config/alacritty/alacritty.toml

@@ -0,0 +1,12 @@
+[general]
+import = ["~/.config/alacritty/theme.toml"]
+
+[font]
+size = 12
+
+[font.normal]
+family = "Iosevka Nerd Font"
+style = "Regular"
+
+[window]
+opacity = 0.85

config/consul.d/client.json

@@ -0,0 +1,15 @@
+{
+  "tls": {
+    "defaults": {
+      "verify_incoming": false,
+      "verify_outgoing": true,
+      "ca_file": "/etc/consul.d/certs/consul-agent-ca.pem"
+    },
+    "internal_rpc": {
+      "verify_server_hostname": true
+    }
+  },
+  "auto_encrypt": {
+      "tls": true
+  }
+}

config/consul.d/common.json

@@ -0,0 +1,25 @@
+{
+  "datacenter": "samfelag",
+
+  "bind_addr": "{{ GetInterfaceIP \"tailscale0\" }}",
+  "advertise_addr": "{{ GetInterfaceIP \"tailscale0\" }}",
+  "client_addr": "{{ GetInterfaceIP \"tailscale0\" }} 127.0.0.1",
+
+  "ports": {
+    "grpc_tls": 8502
+  },
+
+  "acl": {
+    "enabled": true,
+    "default_policy": "allow",
+    "enable_token_persistence": true
+  },
+
+  "connect": {
+    "enabled": true
+  },
+
+  "performance": {
+    "raft_multiplier": 1
+  }
+}

config/consul.d/server-list.json

@@ -0,0 +1,5 @@
+{
+  "retry_join": [
+      "100.99.167.21"
+  ]
+}

config/consul.d/server.json

@@ -0,0 +1,22 @@
+{
+  "server": true,
+  "bootstrap_expect": 1,
+  "ui_config": {
+    "enabled": true
+  },
+  "tls": {
+    "defaults": {
+      "verify_incoming": true,
+      "verify_outgoing": true,
+      "ca_file": "/etc/consul.d/certs/consul-agent-ca.pem",
+      "cert_file": "/etc/consul.d/certs/samfelag-server-consul.pem",
+      "key_file": "/etc/consul.d/certs/samfelag-server-consul-key.pem"
+    },
+    "internal_rpc": {
+      "verify_server_hostname": true
+    }
+  },
+  "auto_encrypt": {
+      "allow_tls": true
+  }
+}

config/doom/config.el

@@ -0,0 +1,162 @@
+;;; $DOOMDIR/config.el -*- lexical-binding: t; -*-
+
+;; Some functionality uses this to identify you, e.g. GPG configuration, email
+;; clients, file templates and snippets.
+(setq user-full-name "Marc Sastre Rienitz"
+      user-mail-address "marc@sastre.cat")
+
+;; This determines the style of line numbers in effect. If set to `nil', line
+;; numbers are disabled. For relative line numbers, set this to `relative'.
+(setq display-line-numbers-type t)
+
+;; Fonts
+(setq doom-font (font-spec :family "Iosevka Nerd Font" :size 18))
+(setq doom-symbol-font (font-spec :family "Iosevka Nerd Font" :size 18))
+(setq doom-emoji-font (font-spec :family "Noto Color Emoji" :size 18))
+
+;; Themeing
+(use-package base16-theme
+  :init (add-to-list 'custom-theme-load-path "~/.config/doom/themes")
+  :ensure t
+  :config
+  (load-theme 'base16-samfelag t))
+;; (after! doom-themes
+;;   (load-theme 'doom-nano-dark t))
+
+;; (use-package! doom-nano-modeline
+;;   :config
+;;   (doom-nano-modeline-mode 1)
+;;   (global-hide-mode-line-mode 1))
+
+;; Here are some additional functions/macros that could help you configure Doom:
+;;
+;; - `load!' for loading external *.el files relative to this one
+;; - `use-package!' for configuring packages
+;; - `after!' for running code after a package has loaded
+;; - `add-load-path!' for adding directories to the `load-path', relative to
+;;   this file. Emacs searches the `load-path' when you load packages with
+;;   `require' or `use-package'.
+;; - `map!' for binding new keys
+;;
+;; To get information about any of these functions/macros, move the cursor over
+;; the highlighted symbol at press 'K' (non-evil users must press 'C-c c k').
+;; This will open documentation for it, including demos of how they are used.
+;;
+;; You can also try 'gd' (or 'C-c c d') to jump to their definition and see how
+;; they are implemented.
+
+;; -----------------------------------------------------------------------------
+
+(setq-default tab-width 4)
+
+;; -----------------------------------------------------------------------------
+;; Emojify
+;; -----------------------------------------------------------------------------
+(use-package! emojify
+  :config
+  (when (member "Noto Color Emoji" (font-family-list))
+    (set-fontset-font
+     t 'emoji (font-spec :family "Noto Color Emoji") nil 'prepend))
+  (setq emojify-display-style 'image)
+  (setq emojify-emoji-styles '(unicode)))
+
+
+;; -----------------------------------------------------------------------------
+;; Projectile
+;; -----------------------------------------------------------------------------
+(use-package projectile
+  :config
+  (setq projectile-project-search-path '("~/projects")))
+
+
+;; -----------------------------------------------------------------------------
+;; vterm
+;; -----------------------------------------------------------------------------
+(use-package vterm
+  :config
+  (setq vterm-shell "zsh"))
+
+
+;; -----------------------------------------------------------------------------
+;; elisp
+;; -----------------------------------------------------------------------------
+(use-package parinfer
+  :defer t)
+
+
+;; -----------------------------------------------------------------------------
+;; LSP
+;; -----------------------------------------------------------------------------
+;; (use-package lsp-mode
+;;   :init
+;;   :hook (;;
+;;          (clojure-mode . lsp-deferred)
+;;          (python-mode . lsp-deferred)
+;;          ;; if you want which-key integration
+;;          (lsp-mode . lsp-enable-which-key-integration))
+;;   :commands (lsp lsp-deferred))
+
+
+;; -----------------------------------------------------------------------------
+;; Python
+;; -----------------------------------------------------------------------------
+(defun my-python-mode-hook ()
+  "Do everything I need when entering python mode"
+  (setq fill-column 120)
+  (add-hook! 'before-save-hook :local #'py-autopep8-buffer #'py-isort-buffer)
+  ;; accept underscore as part of a word
+  (superword-mode 1)
+  (modify-syntax-entry ?_ "w" python-mode-syntax-table))
+
+(add-hook 'python-mode-hook 'my-python-mode-hook)
+
+(use-package py-autopep8
+  :config
+  (setq py-autopep8-options '("--max-line-length=120")))
+
+(use-package pipenv
+  :config
+  (setq pipenv-with-projectile t)
+  (setenv "PIPENV_MAX_DEPTH" "10"))
+
+;; -----------------------------------------------------------------------------
+;; Web (HTML + CSS)
+;; -----------------------------------------------------------------------------
+;; (use-package! lsp-tailwindcss)
+
+;; -----------------------------------------------------------------------------
+;; Org
+;; -----------------------------------------------------------------------------
+(setq org-directory "~/org")
+(setq org-agenda-files (directory-files-recursively "~/org/agenda" "\\.org$"))
+
+
+;; -----------------------------------------------------------------------------
+;; Agenix
+;; -----------------------------------------------------------------------------
+(load! "modules/agenix.el")
+(setq agenix-age-program "age")
+(setq agenix-agenix-program "agenix")
+
+
+;; -----------------------------------------------------------------------------
+;; Appearance - Prettify
+;; -----------------------------------------------------------------------------
+(load! "modules/prettify-utils.el")
+
+(pretty-hook python-mode
+  ("def" " 󰊕 ")
+  ("class" "𝙘")
+  ("None" "∅")
+  ("lambda" "λ")
+  ("not in" "∉")
+  ("in" "∈"))
+
+
+
+(pretty-hook emacs-lisp-mode)
+  ;; ("defun" "𝙛")
+
+;; (pretty-hook org-mode
+;;   ("[ ]" "☐")
+;;   ("[X]" "☑"))

config/doom/custom.el

@@ -0,0 +1,12 @@
+(custom-set-variables
+ ;; custom-set-variables was added by Custom.
+ ;; If you edit it by hand, you could mess it up, so be careful.
+ ;; Your init file should contain only one such instance.
+ ;; If there is more than one, they won't work right.
+ '(safe-local-variable-values '((cider-shadow-cljs-default-options . "app"))))
+(custom-set-faces
+ ;; custom-set-faces was added by Custom.
+ ;; If you edit it by hand, you could mess it up, so be careful.
+ ;; Your init file should contain only one such instance.
+ ;; If there is more than one, they won't work right.
+ )

config/doom/init.el

@@ -0,0 +1,190 @@
+;;; init.el -*- lexical-binding: t; -*-
+
+;; This file controls what Doom modules are enabled and what order they load
+;; in. Remember to run 'doom sync' after modifying it!
+
+;; NOTE Press 'SPC h d h' (or 'C-h d h' for non-vim users) to access Doom's
+;;      documentation. There you'll find a "Module Index" link where you'll find
+;;      a comprehensive list of Doom's modules and what flags they support.
+
+;; NOTE Move your cursor over a module's name (or its flags) and press 'K' (or
+;;      'C-c c k' for non-vim users) to view its documentation. This works on
+;;      flags as well (those symbols that start with a plus).
+;;
+;;      Alternatively, press 'gd' (or 'C-c c d') on a module to browse its
+;;      directory (for easy access to its source code).
+
+(doom! :input
+       ;;chinese
+       ;;japanese
+       ;;layout            ; auie,ctsrnm is the superior home row
+
+       :completion
+       company           ; the ultimate code completion backend
+       ;;helm              ; the *other* search engine for love and life
+       ;;ido               ; the other *other* search engine...
+       ivy               ; a search engine for love and life
+
+       :ui
+       ;;deft              ; notational velocity for Emacs
+       doom              ; what makes DOOM look the way it does
+       doom-dashboard    ; a nifty splash screen for Emacs
+       ;; doom-quit         ; DOOM quit-message prompts when you quit Emacs
+       (emoji +unicode)  ; 🙂
+       ;; fill-column       ; a `fill-column' indicator
+       hl-todo           ; highlight TODO/FIXME/NOTE/DEPRECATED/HACK/REVIEW
+       ;;hydra
+       ;;indent-guides     ; highlighted indent columns
+       (ligatures
+        +iosevka)         ; ligatures and symbols to make your code pretty again
+       ;;minimap           ; show a map of the code on the side
+       ;;modeline          ; snazzy, Atom-inspired modeline, plus API
+       ;;nav-flash         ; blink cursor line after big motions
+       ;;neotree           ; a project drawer, like NERDTree for vim
+       ophints           ; highlight the region an operation acts on
+       (popup +defaults)   ; tame sudden yet inevitable temporary windows
+       ;;tabs              ; a tab bar for Emacs
+       treemacs          ; a project drawer, like neotree but cooler
+       unicode           ; extended unicode support for various languages
+       vc-gutter         ; vcs diff in the fringe
+       vi-tilde-fringe   ; fringe tildes to mark beyond EOB
+       ;;window-select     ; visually switch windows
+       workspaces        ; tab emulation, persistence & separate workspaces
+       ;;zen               ; distraction-free coding or writing
+
+       :editor
+       (evil +everywhere); come to the dark side, we have cookies
+       file-templates    ; auto-snippets for empty files
+       fold              ; (nigh) universal code folding
+       ;;(format +onsave)  ; automated prettiness
+       ;;god               ; run Emacs commands without modifier keys
+       ;;lispy             ; vim for lisp, for people who don't like vim
+       ;;multiple-cursors  ; editing in many places at once
+       ;;objed             ; text object editing for the innocent
+       parinfer          ; turn lisp into python, sort of
+       ;;rotate-text       ; cycle region at point between text candidates
+       snippets          ; my elves. They type so I don't have to
+       ;;word-wrap         ; soft wrapping with language-aware indent
+
+       :emacs
+       dired             ; making dired pretty [functional]
+       electric          ; smarter, keyword-based electric-indent
+       ;;ibuffer         ; interactive buffer management
+       undo              ; persistent, smarter undo for your inevitable mistakes
+       vc                ; version-control and Emacs, sitting in a tree
+
+       :term
+       ;;eshell            ; the elisp shell that works everywhere
+       ;;shell             ; simple shell REPL for Emacs
+       ;;term              ; basic terminal emulator for Emacs
+       vterm             ; the best terminal emulation in Emacs
+
+       :checkers
+       syntax              ; tasing you for every semicolon you forget
+       ;;spell             ; tasing you for misspelling mispelling
+       ;;grammar           ; tasing grammar mistake every you make
+
+       :tools
+       ;;ansible
+       ;;debugger          ; FIXME stepping through code, to help you add bugs
+       direnv
+       ;;docker
+       ;;editorconfig      ; let someone else argue about tabs vs spaces
+       ;;ein               ; tame Jupyter notebooks with emacs
+       (eval +overlay)     ; run code, run (also, repls)
+       ;;gist              ; interacting with github gists
+       lookup              ; navigate your code and its documentation
+       (lsp +eglot)
+       magit             ; a git porcelain for Emacs
+       ;;make              ; run make tasks from Emacs
+       ;;pass              ; password manager for nerds
+       ;;pdf               ; pdf enhancements
+       ;;prodigy           ; FIXME managing external services & code builders
+       ;;rgb               ; creating color strings
+       ;;taskrunner        ; taskrunner for all your projects
+       ;;terraform         ; infrastructure as code
+       ;;tmux              ; an API for interacting with tmux
+       ;;upload            ; map local to remote projects via ssh/ftp
+
+       :os
+       (:if IS-MAC macos)  ; improve compatibility with macOS
+       ;;tty               ; improve the terminal Emacs experience
+
+       :lang
+       ;;agda              ; types of types of types of types...
+       ;;cc                ; C/C++/Obj-C madness
+       (clojure
+        +lsp)              ; java with a lisp
+       ;;common-lisp       ; if you've seen one lisp, you've seen them all
+       ;;coq               ; proofs-as-programs
+       ;;crystal           ; ruby at the speed of c
+       ;;csharp            ; unity, .NET, and mono shenanigans
+       ;;data              ; config/data formats
+       ;;(dart +flutter)   ; paint ui and not much else
+       ;;elixir            ; erlang done right
+       ;;elm               ; care for a cup of TEA?
+       emacs-lisp        ; drown in parentheses
+       ;;erlang            ; an elegant language for a more civilized age
+       ;;ess               ; emacs speaks statistics
+       ;;faust             ; dsp, but you get to keep your soul
+       ;;fsharp            ; ML stands for Microsoft's Language
+       ;;fstar             ; (dependent) types and (monadic) effects and Z3
+       ;;gdscript          ; the language you waited for
+       ;;(go +lsp)         ; the hipster dialect
+       ;;(haskell +dante)  ; a language that's lazier than I am
+       ;;hy                ; readability of scheme w/ speed of python
+       ;;idris             ; a language you can depend on
+       json              ; At least it ain't XML
+       ;;(java +meghanada) ; the poster child for carpal tunnel syndrome
+       ;;javascript        ; all(hope(abandon(ye(who(enter(here))))))
+       ;;julia             ; a better, faster MATLAB
+       ;;kotlin            ; a better, slicker Java(Script)
+       latex             ; writing papers in Emacs has never been so fun
+       ;;lean
+       ;;factor
+       ;;ledger            ; an accounting system in Emacs
+       ;;lua               ; one-based indices? one-based indices
+       markdown          ; writing docs for people to ignore
+       ;;nim               ; python + lisp at the speed of c
+       nix               ; I hereby declare "nix geht mehr!"
+       ;;ocaml             ; an objective camel
+       (org
+        +journal
+        +pretty)           ; organize your plain life in plain text
+       php               ; perl's insecure younger brother
+       ;;plantuml          ; diagrams for confusing people more
+       ;;purescript        ; javascript, but functional
+       (python
+        +lsp)          ; beautiful is better than ugly
+       ;;qt                ; the 'cutest' gui framework ever
+       ;;racket            ; a DSL for DSLs
+       ;;raku              ; the artist formerly known as perl6
+       rest              ; Emacs as a REST client
+       ;;rst               ; ReST in peace
+       ;;(ruby +rails)     ; 1.step {|i| p "Ruby is #{i.even? ? 'love' : 'life'}"}
+       (rust
+        +lsp)              ; Fe2O3.unwrap().unwrap().unwrap().unwrap()
+       ;;scala             ; java, but good
+       ;;scheme            ; a fully conniving family of lisps
+       sh                ; she sells {ba,z,fi}sh shells on the C xor
+       ;;sml
+       ;;solidity          ; do you need a blockchain? No.
+       ;;swift             ; who asked for emoji variables?
+       ;;terra             ; Earth and Moon in alignment for performance.
+       ;;web               ; the tubes
+       yaml              ; JSON, but readable
+
+       :email
+       ;;(mu4e +gmail)
+       ;;notmuch
+       ;;(wanderlust +gmail)
+
+       :app
+       ;;calendar
+       ;;irc               ; how neckbeards socialize
+       ;;(rss +org)        ; emacs as an RSS reader
+       ;;twitter           ; twitter client https://twitter.com/vnought
+
+       :config
+       ;;literate
+       (default +bindings +smartparens))

config/doom/modules/agenix.el

@@ -0,0 +1,231 @@
+;;; agenix.el --- Decrypt and encrypt agenix secrets  -*- lexical-binding: t -*-
+
+;; Copyright (C) 2022-2023 Tomasz Maciosowski (t4ccer)
+
+;; Author: Tomasz Maciosowski <t4ccer@gmail.com>
+;; Maintainer: Tomasz Maciosowski <t4ccer@gmail.com>
+;; Package-Requires: ((emacs "27.1"))
+;; URL: https://github.com/t4ccer/agenix.el
+;; Version: 1.0
+;;
+;; Modified version by Marc Sastre that allows subdirectories in the secrets folder.
+
+;; This file is NOT part of GNU Emacs.
+
+;; This program is free software; you can redistribute it and/or modify
+;; it under the terms of the GNU General Public License as published by
+;; the Free Software Foundation, either version 3 of the License, or
+;; (at your option) any later version.
+
+;; This program is distributed in the hope that it will be useful,
+;; but WITHOUT ANY WARRANTY; without even the implied warranty of
+;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+;; GNU General Public License for more details.
+
+;; You should have received a copy of the GNU General Public License
+;; along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+;;; Commentary:
+
+;; Fully transparent editing of agenix secrets. Open a file, edit it, save it and it will be
+;; encrypted automatically.
+
+;;; Code:
+
+(defcustom agenix-age-program "age"
+  "The age program."
+  :group 'agenix
+  :type 'string)
+
+(defcustom agenix-key-files '("~/.ssh/id_ed25519" "~/.ssh/id_rsa")
+  "List of age key files."
+  :group 'agenix
+  :type '(repeat string))
+
+(defcustom agenix-pre-mode-hook nil
+  "Hook to run before entering `agenix-mode'.
+Can be used to set up age binary path."
+  :group 'agenix
+  :type 'hook)
+
+(defvar-local agenix--encrypted-fp nil)
+
+(defvar-local agenix--keys nil)
+
+(defvar-local agenix--undo-list nil)
+
+(defvar-local agenix--point nil)
+
+(define-derived-mode agenix-mode text-mode "agenix"
+  "Major mode for agenix files.
+Don't use directly, use `agenix-mode-if-with-secrets-nix' to ensure that
+secrets.nix exists."
+  (read-only-mode 1)
+
+  (run-hooks 'agenix-pre-mode-hook)
+
+  (agenix-decrypt-buffer)
+  (goto-char (point-min))
+  (setq buffer-undo-list nil)
+
+  (setq require-final-newline nil)
+  (setq buffer-auto-save-file-name nil)
+  (setq write-contents-functions '(agenix-save-decrypted))
+
+  ;; Reverting loads encrypted file back to the buffer, so we need to decrypt it
+  (add-hook 'after-revert-hook
+            (lambda () (when (eq major-mode 'agenix-mode) (agenix-decrypt-buffer)))))
+
+
+(defun agenix--file-search-upward (directory file)
+  "Search DIRECTORY for FILE and return its full path if found, or NIL if not.
+
+If FILE is not found in DIRECTORY, the parent of DIRECTORY will be searched."
+  (let ((parent-dir (file-truename (concat (file-name-directory directory) "../")))
+        (current-path (if (not (string= (substring directory (- (length directory) 1)) "/"))
+                         (concat directory "/" file)
+                         (concat directory file))))
+    (if (file-exists-p current-path)
+        current-path
+        (when (and (not (string= (file-truename directory) parent-dir))
+                   (< (length parent-dir) (length (file-truename directory))))
+          (agenix--file-search-upward parent-dir file)))))
+
+(defun agenix--secrets-nix-path ()
+  "Search for secrets.nix file in the current directory or any parent directory.
+Return it if found"
+ (agenix--file-search-upward "./" "secrets.nix"))
+
+(defun agenix--relative-buffer-path ()
+  "Return the filename of the current buffer relative to the secrets.nix path."
+  (file-relative-name
+   (buffer-file-name)
+   (file-name-directory (agenix--secrets-nix-path))))
+
+(defun agenix--buffer-string* (buffer)
+  "Like `buffer-string' but read from BUFFER parameter."
+  (with-current-buffer buffer
+    (buffer-substring-no-properties (point-min) (point-max))))
+
+(defun agenix--with-temp-buffer (func)
+  "Like `with-temp-buffer' but doesn't actually switch the buffer.
+FUNC takes a temporary buffer that will be disposed after the call."
+  (let* ((age-buf (generate-new-buffer "*age-buf*"))
+         (res (funcall func age-buf)))
+    (kill-buffer age-buf)
+    res))
+
+(defun agenix--process-exit-code-and-output (program &rest args)
+  "Run PROGRAM with ARGS and return the exit code and output in a list."
+  (agenix--with-temp-buffer
+   (lambda (buf) (list (apply #'call-process program nil buf nil args)
+                       (agenix--buffer-string* buf)))))
+
+;;;###autoload
+(defun agenix-decrypt-buffer (&optional encrypted-buffer)
+  "Decrypt ENCRYPTED-BUFFER in place.
+If ENCRYPTED-BUFFER is unset or nil, decrypt the current buffer."
+  (interactive
+   (when current-prefix-arg
+     (list (read-buffer "Encrypted buffer: " (current-buffer) t))))
+
+  (with-current-buffer (or encrypted-buffer (current-buffer))
+    (let* ((nix-res (apply #'agenix--process-exit-code-and-output "nix-instantiate"
+                           (list "--strict" "--json" "--eval" "--expr"
+                                 (format
+                                  "(import %s).\"%s\".publicKeys"
+                                  (agenix--secrets-nix-path)
+                                  (agenix--relative-buffer-path)))))
+           (nix-exit-code (car nix-res))
+           (nix-output (car (cdr nix-res))))
+
+      (if (/= nix-exit-code 0)
+          (warn "Nix evaluation error.
+Probably file %s is not declared as a secret in 'secrets.nix' file.
+Error: %s" (buffer-file-name) nix-output)
+        (let* ((keys (json-parse-string nix-output :array-type 'list))
+               (age-flags (list "--decrypt")))
+
+          ;; Add all user's keys to the age command
+          (dolist (key-path agenix-key-files)
+            (when (file-exists-p (expand-file-name key-path))
+              (setq age-flags
+                    (nconc age-flags (list "--identity" (expand-file-name key-path))))))
+
+          ;; Add file-path to decrypt to the age command
+          (setq age-flags (nconc age-flags (list (buffer-file-name))))
+          (setq agenix--encrypted-fp (buffer-file-name))
+          (setq agenix--keys keys)
+
+          ;; Check if file already exists
+          (if (not (file-exists-p (buffer-file-name)))
+              (progn
+                (message "Not decrypting. File %s does not exist and will be created when you \
+will save this buffer." (buffer-file-name))
+                (read-only-mode -1))
+            (let*
+                ((age-res
+                  (apply #'agenix--process-exit-code-and-output agenix-age-program age-flags))
+                 (age-exit-code (car age-res))
+                 (age-output (car (cdr age-res))))
+
+              (if (= 0 age-exit-code)
+                  (progn
+                    ;; Replace buffer with decrypted content
+                    (read-only-mode -1)
+                    (erase-buffer)
+                    (insert age-output)
+
+                    ;; Mark buffer as not modified
+                    (set-buffer-modified-p nil)
+                    (setq buffer-undo-list agenix--undo-list))
+                (error age-output))))
+          (when agenix--point
+            (goto-char agenix--point)))))))
+
+;;;###autoload
+(defun agenix-save-decrypted (&optional unencrypted-buffer)
+  "Encrypt UNENCRYPTED-BUFFER back to the original .age file.
+If UNENCRYPTED-BUFFER is unset or nil, use the current buffer."
+  (interactive
+   (when current-prefix-arg
+     (list (read-buffer "Unencrypted buffer: " (current-buffer) t))))
+  (with-current-buffer (or unencrypted-buffer (current-buffer))
+    (let* ((age-flags (list "--encrypt")))
+      (progn
+        (dolist (k agenix--keys)
+          (setq age-flags (nconc age-flags (list "--recipient" k))))
+        (setq age-flags (nconc age-flags (list "-o" agenix--encrypted-fp)))
+        (let* ((decrypted-text (buffer-string))
+               (age-res
+                (agenix--with-temp-buffer
+                 (lambda (buf)
+                   (list
+                    (apply #'call-process-region
+                           decrypted-text nil
+                           agenix-age-program
+                           nil
+                           buf
+                           t
+                           age-flags)
+                    (agenix--buffer-string* buf))))))
+          (when (/= 0 (car age-res))
+            (error (car (cdr age-res))))
+          (setq agenix--point (point))
+          (setq agenix--undo-list buffer-undo-list)
+          (revert-buffer :ignore-auto :noconfirm :preserve-modes)
+          (set-buffer-modified-p nil)
+          t)))))
+
+;;;###autoload
+(defun agenix-mode-if-with-secrets-nix ()
+  "Enable `agenix-mode' if the current buffer is in a directory with secrets.nix."
+  (interactive)
+  (when (agenix--secrets-nix-path)
+    (agenix-mode)))
+
+;;;###autoload
+(add-to-list 'auto-mode-alist '("\\.age\\'" . agenix-mode-if-with-secrets-nix))
+
+(provide 'agenix)
+;;; agenix.el ends here

config/doom/modules/prettify-utils.el

@@ -0,0 +1,227 @@
+;;; prettify-utils.el --- Helper functions for prettify-symbols-mode			-*- lexical-binding: t; -*-
+
+;; Copyright © 2016 Ilazki
+
+;; Author:              Ilazki
+;; Created:             31 Oct 2016
+;; URL:                 https://github.com/Ilazki/prettify-utils.el
+;; Keywords:            lisp tools prettify utils prettify-symbols
+;; Version:             1.0.2
+;; Package-Version:     20161110.0430
+;; Package-Requires:    ((emacs "24.4"))
+
+;; This file is not part of GNU Emacs.
+
+;;; Commentary:
+
+;; Prettify-utils provides helper functions to simplify configuration of emacs'
+;; prettify-symbols-mode.  For the unfamiliar, prettify-symbols-mode detects
+;; user-defined character combinations and replaces them with different ones
+;; (usually ligatures) on-screen without changing the source file.  For example,
+;; it can be used to display "≥" any time ">=" is found.
+;;
+;; Unfortunately, setup of prettify-symbols-mode is more complicated than it
+;; needs to be, especially if you want the replacement string to be multiple
+;; characters instead of just one.  For example, displaying "→ " for "->" in
+;; order to improve appearance while still preserving the real  character length.
+;;
+;; To use prettify-symbols, you have to set a buffer-local variable,
+;; prettify-symbols-alist, to an alist containing string/replacement pairs.  This
+;; package provides a helper macro, prettify-utils-generate, to create the alist
+;; in a simple, uniform manner, like so:
+;;
+;; 	(setq prettify-symbols-alist
+;; 		  (prettify-utils-generate
+;; 		   ("lambda" "λ")
+;; 		   ("<="     "≤")
+;; 		   (">="     "≥")
+;; 		   ("->"     "→ ")))
+;;
+;;
+;; Since prettify-symbols uses buffer-local settings, you have to add the alist
+;; for each buffer.  The easiest way to do this is to add it to a mode's hooks.
+;; Example:
+;;
+;; 	(add-hook 'prog-mode-hook (lambda ()
+;; 								(setq prettify-symbols-alist
+;; 								  (prettify-utils-generate
+;; 								   ("lambda" "λ")))
+;;                              (prettify-symbols-mode 1)))
+;;
+;; For convenience, a macro named pretty-hook is also available
+;; that generates the above automatically.
+;; Example:
+;;
+;; (pretty-hook prog-mode-hook
+;;                          ("lambda" "λ")))
+;;
+;; Or, if you're using the same alist for multiple modes, you can create a named
+;; function and pass that to the mode hooks:
+;;
+;;	(defun my-symbols-alist ()
+;;		 (setq prettify-symbols-alist
+;;			(prettify-utils-generate
+;;			 ("lambda" "λ")
+;;			 ("->" "→")
+;;			 ("=>" "⇒"))))
+;;	(add-hook 'prog-mode-hook 'my-symbols-alist)
+;;
+;; Generally, prettify-utils-generate and pretty-hook should be the
+;; only things needed, but some additional helpers are provided in case a need
+;; arises:
+;;
+;; * prettify-utils-generate-f is the function equivalent of using
+;;   prettify-utils-generate.  Should only be needed for creating higher-order
+;;   functions.
+;; * prettify-utils-create-pair is the function used by other functions to create
+;;   alist pairs.
+;; * prettify-utils-string converts a string into the list format required by
+;;   prettify-symbols-alist.
+;;
+;; For more information about any functions or macros provided, as well as
+;; additional example use, refer to any function's docstring with
+;; `M-x describe-function`.
+
+;;; Code:
+
+(provide 'prettify-utils)
+
+;;;###autoload
+(defun prettify-utils--list (l &optional glue)
+  "Takes two lists and interleaves the (optional) second between each element of
+the first.  Used to create multi-character sequences for use with the minor mode
+`prettify-symbols-mode'.  If not supplied, GLUE defaults to '(Br . Bl).  For more
+information about GLUE, refer to the documentation for the `compose-region'
+function and the `reference-point-alist' variable.
+This function is used by `prettify-utils-string' to create the lists given to
+`prettify-symbols-alist'.  Calling prettify-utils--list directly is probably not
+what you want, check the documentation for `prettify-utils-string' and
+`prettify-utils-generate' instead.
+Example use:
+(prettify-utils--list (string-to-list \"hello\") '(Br . Bl))
+"
+
+  (let ((glue (or glue '(Br . Bl)))
+		(head (car l))
+		(tail (cdr l)))
+	(cond
+	 ((not (consp l))    '())
+	 ((not (consp tail))  (list head))
+	 (t (cons head
+			  (cons glue
+					(prettify-utils--list tail glue)))))))
+
+;;;###autoload
+(defun prettify-utils-string (s &optional glue)
+  "Takes a string and an optional list, and returns a list of the string's
+characters with GLUE interleaved between each character, for use with
+`prettify-symbols-mode'.  If no GLUE is supplied, uses the
+`prettify-utils--list' default.  For more information about GLUE, refer to the
+documentation for the `compose-region' function and the `reference-point-alist'
+variable.
+This function can be used to simplify multiple-character replacements when
+manually constructing a `prettify-symbols-alist'.  For something more high-level,
+consider using `prettify-utils-generate' to create the entire alist instead.
+Example:
+(prettify-utils-string \"example\" '(Br . Bl))
+"
+  (prettify-utils--list (append s nil) glue))
+
+;; Was used during macro creation then removed
+(defun prettify-utils-create-pair (old new &optional glue)
+  "Takes two strings, OLD and NEW, and an optional GLUE list, and creates an
+alist pair for use when creating a `prettify-symbols-alist'.  For more information
+about GLUE, refer to the documentation for the `compose-region' function and the
+`reference-point-alist' variable.
+This function is primarily for use by the user-friendly `prettify-utils-generate'
+macro, but may be useful if manual alist creation is desired for some reason.
+Example:
+(setq prettify-symbols-alist `((\">=\" ?≥)
+	  ,(prettify-utils-create-pair \"foo\" \"bar\" '(Br . Bl))))
+"
+  (cons old (prettify-utils-string new glue)))
+
+;;;###autoload
+(defmacro prettify-utils-generate (&rest lists)
+  "Generates an alist for use when setting `prettify-symbols-alist'.  Takes one or
+more LISTS, each consisting of two strings and an optional GLUE list to be
+interleaved between characters in the replacement list.  If the optional GLUE
+list is not supplied, uses the `prettify-utils--list' default of '(Br . Bl).  For more
+information about GLUE, refer to the documentation for the `compose-region'
+function and the `reference-point-alist' variable.
+Example #1:
+(setq prettify-symbols-alist
+	  (prettify-utils-generate (\"foo\" \"bar\")
+							   (\">=\" \"≥\" (Br . Bl))
+							   (\"->\"     \"→ \")))
+Example #2:
+(setq prettify-symbols-alist
+	  (prettify-utils-generate
+	   (\"lambda\"  \"λ\")
+	   (\"|>\"      \"▷\")
+	   (\"<|\"      \"◁\")
+	   (\"->>\"     \"↠  \")
+	   (\"->\"      \"→ \")
+	   (\"<-\"      \"← \")
+	   (\"=>\"      \"⇒\")
+	   (\"<=\"      \"≤\")
+	   (\">=\"      \"≥\")))
+"
+  (let* ((head       (car   lists))
+         (tail       (cdr   lists))
+         (old-string (car   head))
+		 (new-string (cadr  head))
+		 (glue-list  (caddr head)))
+	(if (not (consp head))
+		'()
+       `(cons (quote ,(prettify-utils-create-pair old-string new-string glue-list))
+			 (prettify-utils-generate ,@tail)))))
+
+
+;;;###autoload
+(defun prettify-utils-generate-f (&rest lists)
+  "Generates an alist for use when setting `prettify-symbols-alist'.  Takes one or
+more LISTS, each consisting of two strings and an optional GLUE list to be
+interleaved between characters in the replacement list.  If the optional GLUE
+list is not supplied, uses the `prettify-utils--list' default of '(Br . Bl).  For more
+information about GLUE, refer to the documentation for the `compose-region'
+function and the `reference-point-alist' variable.
+This is a function equivalent of the `prettify-utils-generate' macro.  Unless
+you specifically need a function, such as for use with a higher-order function,
+you should use the `prettify-utils-generate' macro instead.
+Example:
+(prettify-utils-generate-f '(\"foo\" \"bar\")
+				           '(\">=\" \"≥\" (Br . Bl))
+						   '(\"->\"     \"→ \"))
+"
+  (let* ((head       (car   lists))
+         (tail       (cdr   lists))
+         (old-string (car   head))
+		 (new-string (cadr  head))
+		 (glue-list  (caddr head)))
+  (if (not (consp head))
+	  '()
+      (cons (prettify-utils-create-pair old-string new-string glue-list)
+                   (apply 'prettify-utils-generate-f tail)))))
+
+;; Macro based on a suggestion and example code by reddit user /u/Kungsgeten
+;; Github @ https://github.com/Kungsgeten/
+;;;###autoload
+(defmacro pretty-hook (mode &rest lists)
+  "Convenience macro for the most likely use case of prettify-utils: using
+`add-hook' to add LISTS to MODE. LISTS consists of one or more lists of
+replacements, defined as expected by `prettify-utils-generate'.
+Example:
+;; Replace org-mode checkboxes with appropriate unicode boxes
+(pretty-hook org-mode
+             (\"[ ]\" \"☐\")
+             (\"[X]\" \"☑\")
+             (\"[-]\" \"❍\"))
+"
+  `(add-hook ',(intern (concat (symbol-name mode) "-hook"))
+             (lambda ()
+               (setq prettify-symbols-alist
+                     (prettify-utils-generate ,@lists))
+               (prettify-symbols-mode 1))))
+
+;;; prettify-utils.el ends here

config/doom/packages.el

@@ -0,0 +1,82 @@
+;; -*- no-byte-compile: t; -*-
+
+;; To install a package with Doom you must declare them here and run 'doom sync'
+;; on the command line, then restart Emacs for the changes to take effect -- or
+;; use 'M-x doom/reload'.
+
+
+;; To install SOME-PACKAGE from MELPA, ELPA or emacsmirror:
+;(package! some-package)
+
+;; To install a package directly from a remote git repo, you must specify a
+;; `:recipe'. You'll find documentation on what `:recipe' accepts here:
+;; https://github.com/raxod502/straight.el#the-recipe-format
+;(package! another-package
+;  :recipe (:host github :repo "username/repo"))
+
+;; If the package you are trying to install does not contain a PACKAGENAME.el
+;; file, or is located in a subdirectory of the repo, you'll need to specify
+;; `:files' in the `:recipe':
+;(package! this-package
+;  :recipe (:host github :repo "username/repo"
+;           :files ("some-file.el" "src/lisp/*.el")))
+
+;; If you'd like to disable a package included with Doom, you can do so here
+;; with the `:disable' property:
+;(package! builtin-package :disable t)
+
+;; You can override the recipe of a built in package without having to specify
+;; all the properties for `:recipe'. These will inherit the rest of its recipe
+;; from Doom or MELPA/ELPA/Emacsmirror:
+;(package! builtin-package :recipe (:nonrecursive t))
+;(package! builtin-package-2 :recipe (:repo "myfork/package"))
+
+;; Specify a `:branch' to install a package from a particular branch or tag.
+;; This is required for some packages whose default branch isn't 'master' (which
+;; our package manager can't deal with; see raxod502/straight.el#279)
+;(package! builtin-package :recipe (:branch "develop"))
+
+;; Use `:pin' to specify a particular commit to install.
+;(package! builtin-package :pin "1a2b3c4d5e")
+
+
+;; Doom's packages are pinned to a specific commit and updated from release to
+;; release. The `unpin!' macro allows you to unpin single packages...
+;(unpin! pinned-package)
+;; ...or multiple packages
+;(unpin! pinned-package another-pinned-package)
+;; ...Or *all* packages (NOT RECOMMENDED; will likely break things)
+;(unpin! t)
+
+(package! base16-theme)
+(package! parinfer)
+
+;; Env
+(package! inheritenv)
+
+;; Editor
+(package! dot-mode)
+
+;; Python
+(package! py-autopep8)
+
+;; Web (HTML + CSS)
+(package! lsp-tailwindcss :recipe (:host github :repo "merrickluo/lsp-tailwindcss"))
+
+;; Org
+
+;; Org-Roam UI
+; (unpin! org-roam)
+; (package! websocket)
+; (package! org-roam-ui :recipe (:host github :repo "org-roam/org-roam-ui" :files ("*.el" "out")))
+
+(package! doom-nano-modeline
+  :recipe (:host github
+           :repo "ronisbr/doom-nano-modeline"))
+
+;; Agenix
+;; (package! agenix
+;;   :recipe (:host github
+;;            :repo "t4ccer/agenix.el"
+;;            :branch "main"
+;;            :files ("*.el")))

config/eww/bars/top-bar.scss

@@ -0,0 +1,149 @@
+*{
+    all: unset;
+    font-family: Iosevka;
+    font-size: 16px;
+}
+
+/** Top bar **/
+.top-bar {
+    padding-left: 16px;
+    padding-right: 24px;
+}
+
+tooltip.background {
+    background-color: $base00;
+    border-radius: 10px;
+    color: $base07;
+}
+
+tooltip label {
+    margin: 6px;
+}
+
+.module {
+    margin: 0px 0px 0px 0px;
+    border-radius: 0px 0px 0px 0px;
+    padding-left: 8px;
+    padding-right: 8px;
+}
+
+.icon {
+    font-size: 24px;
+    padding-right: 8px;
+}
+
+.separator {
+    padding-left: 4px;
+    padding-right: 4px;
+    color: $base02;
+}
+
+/** Bluetooth **/
+.bluetooth {
+    color: $base0D;
+}
+
+.bluetooth.icon {
+    padding-right: 4px;
+}
+
+.bluetooth-text {
+    padding-left: 8px;
+}
+
+/** Wifi **/
+.wifi {
+    color: $base0D;
+}
+
+.wifi.icon {
+    padding-right: 12px;
+}
+
+.wifi-text {
+    padding-left: 8px;
+}
+
+/** Volume **/
+.volume {
+    color: $base0A;
+}
+
+.volume-mute {
+    color: $base04;
+}
+
+.volume-bar {
+    padding-left: 8px;
+    highlight {
+        background-color: $base0A;
+        border-radius: 10px;
+    }
+    trough {
+        background-color: $base04;
+        min-height: 10px;
+        border-radius: 10px;
+    }
+}
+
+/** Battery **/
+.battery.charging {
+    color: $base0B;
+}
+
+.battery.discharging {
+    padding-right: 0px;
+    color: $base04;
+}
+
+.battery-bar {
+    padding-left: 8px;
+    progress {
+        background-color: $base0B;
+        border-radius: 10px;
+        min-height: 10px;
+    }
+    trough {
+        background-color: $base04;
+        border-radius: 10px;
+        min-height: 10px;
+        min-width: 60px;
+    }
+}
+
+/** Clock **/
+.clock {
+    color: $base05;
+}
+
+.clock-time {
+    padding-left: 4px;
+    padding-right: 4px;
+}
+
+.clock-date {
+    padding-left: 4px;
+}
+
+.clock-year {
+    padding-bottom: 8px;
+    font-size: 75%;
+}
+
+/** Workspaces **/
+
+.workspace-entry {
+    padding-left: 8px;
+    padding-right: 8px;
+}
+.workspace-entry.occupied {
+    color: $base06;
+}
+
+.workspace-entry.empty {
+    color: $base02;
+}
+
+.workspace-entry.current {
+    color: $base0C;
+}

config/eww/bars/top-bar.yuck

@@ -0,0 +1,44 @@
+(include "./widgets/common.yuck")
+
+(include "./widgets/battery.yuck")
+(include "./widgets/bluetooth.yuck")
+(include "./widgets/clock.yuck")
+(include "./widgets/volume.yuck")
+(include "./widgets/workspaces.yuck")
+(include "./widgets/wifi.yuck")
+
+(defwindow top-bar
+          :monitor 0
+          :geometry (geometry :x "0%"
+                              :y "8px"
+                              :width "100%"
+                              :height "40px"
+                              :anchor "top center")
+          :stacking "fg"
+          :exclusive "true"
+  (box :class "top-bar"
+       :orientation "h"
+       :space-evenly "true"
+       (bar-left)
+       (bar-center)
+       (bar-right)))
+
+(defwidget bar-left []
+  (box :halign "start"
+       :orientation "h"
+       (workspaces-module)))
+
+(defwidget bar-center []
+  (box :halign "center"
+       :orientation "h"))
+
+(defwidget bar-right []
+  (box :halign "end"
+       :orientation "h"
+       :space-evenly "false"
+       (bluetooth-module)
+       (wifi-module)
+       (battery-module)
+       (volume-module)
+       (sep)
+       (clock-module)))

config/eww/eww.scss

@@ -0,0 +1,2 @@
+@import './colour-scheme.scss'
+@import './bars/top-bar.scss'

config/eww/eww.yuck

@@ -0,0 +1 @@
+(include "./bars/top-bar.yuck")

config/eww/scripts/get-active-workspace.sh

@@ -0,0 +1,6 @@
+#!/usr/bin/env bash
+
+hyprctl monitors -j | jq '.[] | select(.focused) | .activeWorkspace.id'
+
+socat -u UNIX-CONNECT:$XDG_RUNTIME_DIR/hypr/$HYPRLAND_INSTANCE_SIGNATURE/.socket2.sock - |
+  stdbuf -o0 awk -F '>>|,' -e '/^workspace>>/ {print $2}' -e '/^focusedmon>>/ {print $3}'

config/eww/scripts/get-volume-info.sh

@@ -0,0 +1,7 @@
+#!/bin/env bash
+
+amixer sget Master | \
+    grep 'Left:' | \
+    sed -e 's/[^[]*\[\([0-9]*\)%\][^[]\[\(\w*\)\]/{"volume": \1, "muted": \2}/' \
+        -e 's/on/false/' \
+        -e 's/off/true/'

config/eww/scripts/get-wifi-info.sh

@@ -0,0 +1,8 @@
+#!/bin/env bash
+
+CONN_INFO=$(nmcli -g in-use,ssid,signal dev wifi list | \
+    grep "^*" | \
+    sed -e 's/\*:\([^:]*\):\([0-9]*\)/ ,"ssid": "\1", "signal": \2/')
+CONNECTED=$([[ -z $CONN_INFO ]] && echo "false" || echo "true")
+
+echo "{\"connected\": \"$CONNECTED\"$CONN_INFO}"

config/eww/scripts/get-workspaces.sh

@@ -0,0 +1,11 @@
+#!/bin/env bash
+
+spaces (){
+	WORKSPACE_WINDOWS=$(hyprctl workspaces -j | jq 'map({key: .id | tostring, value: .windows}) | from_entries')
+	seq 1 6 | jq --argjson windows "${WORKSPACE_WINDOWS}" --slurp -Mc 'map(tostring) | map({id: ., windows: ($windows[.]//0)})'
+}
+
+spaces
+socat -u UNIX-CONNECT:$XDG_RUNTIME_DIR/hypr/$HYPRLAND_INSTANCE_SIGNATURE/.socket2.sock - | while read -r line; do
+	spaces
+done

config/eww/widgets/battery.yuck

@@ -0,0 +1,21 @@
+(defvar battery-reveal false)
+
+(defwidget battery-module []
+  (eventbox :onhover "${EWW_CMD} update battery-reveal=true"
+            :onhoverlost "${EWW_CMD} update battery-reveal=false"
+            (box :class "module battery ${EWW_BATTERY.BAT0.status == "Discharging" ? "discharging" : "charging"}"
+                 :orientation "h"
+                 :space-evenly "false"
+                 :tooltip "Battery: ${EWW_BATTERY.BAT0.capacity}%"
+                 (label :text {EWW_BATTERY.BAT0.status == "Discharging" ?
+                               EWW_BATTERY.BAT0.capacity < 10 ? "󰂎" : EWW_BATTERY.BAT0.capacity < 30 ? "󱊡" : EWW_BATTERY.BAT0.capacity < 70 ? "󱊢" : "󱊣" :
+                               EWW_BATTERY.BAT0.capacity < 10 ? "󰢟" : EWW_BATTERY.BAT0.capacity < 30 ? "󱊤" : EWW_BATTERY.BAT0.capacity < 70 ? "󱊥" : "󱊦"}
+                        :class "battery icon")
+                 (revealer :transition "slideleft"
+                           :duration "750ms"
+                           :reveal {battery-reveal}
+                           (progress :class "battery-bar"
+                                     :orientation "h"
+                                     :valign "center"
+                                     :width 60
+                                     :value {EWW_BATTERY.BAT0.capacity})))))

config/eww/widgets/bluetooth.yuck

@@ -0,0 +1,29 @@
+(defvar bluetooth-reveal false)
+(defpoll bluetooth-status
+  :initial ""
+  :interval "10s"
+  "bluetoothctl show | grep -q \"Powered: yes\" && { [[ $(bluetoothctl devices Connected) ]] && echo \"connected\" || echo \"on\"; } || echo \"off\"")
+(defpoll bluetooth-devices
+  :initial ""
+  :interval "20s"
+  "for device in $(bluetoothctl devices Connected | grep Device | cut -d ' ' -f 2); do bluetoothctl info $device | grep \"Alias\" | cut -d ' ' -f 2-; done;")
+
+
+(defwidget bluetooth-module []
+  (eventbox :onhover "${EWW_CMD} update bluetooth-reveal=true"
+            :onhoverlost "${EWW_CMD} update bluetooth-reveal=false"
+            :onclick "$HOME/.config/rofi/menus/bluetooth/bluetooth.sh &"
+            (box :class "module bluetooth"
+                 :orientation "h"
+                 :space-evenly "false"
+                 :tooltip {bluetooth-status == "connected" ? bluetooth-devices :
+                           bluetooth-status == "on" ? "Bluetooth: On" : "Bluetooth: Off"}
+                 (label :text {bluetooth-status == "connected" ? "󰂱" :
+                               bluetooth-status == "on" ? "󰂯" : "󰂲"}
+                        :class "bluetooth icon")
+                 (revealer :transition "slideleft"
+                           :duration "750ms"
+                           :reveal {bluetooth-reveal && winfo.connected}
+                           (label :class "bluetooth-text"
+                                  :text {bluetooth-status == "connected" ? "Connected" :
+                                         bluetooth-status == "on" ? "On" : "Off"})))))

config/eww/widgets/clock.yuck

@@ -0,0 +1,21 @@
+(defpoll clock-time :interval "1s" "date +\"%H:%M:%S\"")
+(defpoll clock-date :interval "1m" "date +\"%d/%m\"")
+(defpoll clock-year :interval "1h" "date +\"%Y\"")
+(defvar date-reveal false)
+
+(defwidget clock-module []
+  (eventbox :onhover "${EWW_CMD} update date-reveal=true"
+            :onhoverlost "${EWW_CMD} update date-reveal=false"
+            (box :class "module clock"
+                 :orientation "h"
+                 :space-evenly "false"
+                 (label :text clock-time
+                        :class "clock-time")
+                 (revealer :transition "slideleft"
+                           :duration "750ms"
+                           :reveal {date-reveal}
+                           (box :orientation "h"
+                                (label :text clock-date
+                                       :class "clock-date")
+                                (label :text clock-year
+                                       :class "clock-year"))))))

config/eww/widgets/common.yuck

@@ -0,0 +1,3 @@
+(defwidget sep []
+  (label :text "|"
+         :class "separator"))

config/eww/widgets/volume.yuck

@@ -0,0 +1,26 @@
+(defpoll vinfo
+  :initial "{\"volume\": 0, \"muted\": false}"
+  :interval "1s"
+  "bash ~/.config/eww/scripts/get-volume-info.sh")
+(defvar volume-reveal false)
+
+(defwidget volume-module []
+  (eventbox :onhover "${EWW_CMD} update volume-reveal=true"
+            :onhoverlost "${EWW_CMD} update volume-reveal=false"
+            (box :class "module volume"
+                 :orientation "h"
+                 :space-evenly false
+                 :tooltip {vinfo.muted? "muted" : "Volume: ${vinfo.volume}%"}
+                 (label :text {vinfo.muted ? "󰝟" : vinfo.volume < 10 ? "󰕿" : vinfo.volume < 70 ? "󰖀" : "󰕾"}
+                        :class "volume icon ${vinfo.muted ? "volume-mute" : ""}")
+                 (revealer :transition "slideleft"
+                           :duration "750ms"
+                           :reveal {volume-reveal && !vinfo.muted}
+                           (scale :class "volume-bar"
+                                  :orientation "h"
+                                  :valign "center"
+                                  :width 60
+                                  :min 0
+                                  :max 101
+                                  :value {vinfo.volume}
+                                  :onchange "amixer sset Master {}% > /dev/null")))))

config/eww/widgets/wifi.yuck

@@ -0,0 +1,25 @@
+(defvar wifi-reveal false)
+(defpoll winfo
+  :initial "{\"connected\": \"false\"}"
+  :interval "10s"
+  "bash ~/.config/eww/scripts/get-wifi-info.sh")
+
+
+(defwidget wifi-module []
+  (eventbox :onhover "${EWW_CMD} update wifi-reveal=true"
+            :onhoverlost "${EWW_CMD} update wifi-reveal=false"
+            :onclick "$HOME/.config/rofi/menus/wifi/wifi.sh &"
+            (box :class "module wifi"
+                 :orientation "h"
+                 :space-evenly "false"
+                 :tooltip {winfo.connected ? "Signal: ${winfo.signal}%" : "Disconnected"}
+                 (label :text { !winfo.connected ? "󰤭" :
+                               winfo.signal < 25 ? "󰤟" :
+                               winfo.signal < 50 ? "󰤢" :
+                               winfo.signal < 75 ? "󰤥" : "󰤨"}
+                        :class "wifi icon")
+                 (revealer :transition "slideleft"
+                           :duration "750ms"
+                           :reveal {wifi-reveal && winfo.connected}
+                           (label :class "wifi-text"
+                                  :text {winfo.connected ? winfo.ssid : "Disconnected"})))))

config/eww/widgets/workspaces.yuck

@@ -0,0 +1,10 @@
+(deflisten workspaces :initial "[]" "bash ~/.config/eww/scripts/get-workspaces.sh")
+(deflisten current_workspace :initial "1" "bash ~/.config/eww/scripts/get-active-workspace.sh")
+(defwidget workspaces-module []
+  (box :space-evenly true
+       (label :text "${workspaces}${current_workspace}"
+              :visible false)
+    (for workspace in workspaces
+         (eventbox :onclick "hyprctl dispatch workspace ${workspace.id}"
+                   (label :text "${workspace.id == current_workspace ? "" : ""}"
+                          :class "workspace-entry ${workspace.id == current_workspace ? "current" : ""} ${workspace.windows > 0 ? "occupied" : "empty"}")))))

config/grapheio/scripts/brightness.sh

@@ -0,0 +1,72 @@
+#!/usr/bin/env bash
+
+# Dependencies:
+# - amixer
+# - pactl
+# - jq
+# - libnotify
+
+ACTION=$1
+
+get_brightness() {
+    brightnessctl | \
+        grep "Current brightness" | \
+        sed -e 's/^\s\+Current brightness: [0-9]\+ (\([0-9]\+\)%).*$/\1/'
+}
+
+get_kb_brightness() {
+    brightnessctl -d platform::kbd_backlight | \
+        grep "Current brightness" | \
+        sed -e 's/^\s\+Current brightness: [0-9]\+ (\([0-9]\+\)%).*$/\1/'
+}
+
+notify() {
+    notify-send "$1" "$2" -e -t 1500 -h string:x-canonical-private-synchronous:brightness
+}
+
+set_brightness() {
+    # Set the brightness
+    TARGET=$1
+    brightnessctl set $TARGET > /dev/null
+
+    # Send a notification
+    BRIGHTNESS=$(get_brightness)
+    ACTION=$([[ ${TARGET:0:1} == "+" ]] && echo "Brightness Up" || echo "Brightness Down")
+
+    BRIGHTNESS_ICON="󰃠"
+
+    TITLE=$(echo "$BRIGHTNESS_ICON $ACTION")
+    BODY=$(echo "$BRIGHTNESS%")
+    notify "$TITLE" "$BODY"
+}
+
+set_kb_brightness() {
+    # Set the brightness
+    TARGET=$1
+    brightnessctl -d platform::kbd_backlight set $TARGET > /dev/null
+
+    # Send a notification
+    BRIGHTNESS=$(get_kb_brightness)
+    ACTION=$([[ ${TARGET:0:1} == "+" ]] && echo "Keyboard brightness Up" || echo "Keyboard brightness Down")
+
+    BRIGHTNESS_ICON="󰃠"
+
+    TITLE=$(echo "$BRIGHTNESS_ICON $ACTION")
+    BODY=$(echo "$BRIGHTNESS%")
+    notify "$TITLE" "$BODY"
+}
+
+
+case $ACTION in
+    set)
+        set_brightness $2
+        ;;
+    kb_set)
+        set_kb_brightness $2
+        ;;
+    *)
+        echo "Unknown action"
+        exit 1
+        ;;
+esac
+

config/grapheio/scripts/screenshot.sh

@@ -0,0 +1,27 @@
+#!/usr/bin/env bash
+set -e
+
+# Dependencies:
+# - slurp
+# - grim
+
+ACTION=$1
+
+DATESTAMP=$(date +"%Y%m%d%H%M%S")
+OUT_DIR="${HOME}/screenshots"
+OUT_FILE="capture-${ACTION}-${DATESTAMP}.png"
+
+case $ACTION in
+    region)
+        [[ ! -d "${OUT_DIR}" ]] && mkdir $OUT_DIR
+        slurp | grim -t png -g - "${OUT_DIR}/${OUT_FILE}"
+        ;;
+    screen)
+        [[ ! -d "${OUT_DIR}" ]] && mkdir $OUT_DIR
+        grim -t png "${OUT_DIR}/${OUT_FILE}"
+        ;;
+    *)
+        echo "Unknown action"
+        exit 1
+        ;;
+esac

config/grapheio/scripts/volume.sh

@@ -0,0 +1,79 @@
+#!/usr/bin/env bash
+
+# Dependencies:
+# - amixer
+# - pactl
+# - jq
+# - libnotify
+
+ACTION=$1
+
+get_volume_info() {
+    amixer sget Master | \
+        grep 'Left:' | \
+        sed -e 's/[^[]*\[\([0-9]*\)%\][^[]\[\(\w*\)\]/{"volume": \1, "muted": \2}/' \
+            -e 's/on/false/' \
+            -e 's/off/true/'
+}
+
+notify() {
+    notify-send "$1" "$2" -e -t 1500 -h string:x-canonical-private-synchronous:volume
+}
+
+mute() {
+    pactl set-sink-mute @DEFAULT_SINK@ toggle
+
+    VOLUME_INFO=$(get_volume_info)
+    VOLUME=$(echo $VOLUME_INFO | jq .volume)
+    if [ $(echo $VOLUME_INFO | jq .muted) == "true" ]
+    then
+        AUDIO_ICON="󰝟"
+        MUTED_STR="Muted"
+        BODY=""
+    else
+        AUDIO_ICON="󰕾"
+        MUTED_STR="Unmuted"
+        BODY=$(echo "$VOLUME%")
+    fi
+
+    TITLE=$(echo "$AUDIO_ICON $MUTED_STR")
+    notify "$TITLE" "$BODY"
+}
+
+set_volume() {
+    # Set the volume
+    TARGET=$1
+    pactl set-sink-volume @DEFAULT_SINK@ $TARGET
+
+    # Send a notification
+    VOLUME_INFO=$(get_volume_info)
+    ACTION=$([[ ${TARGET:0:1} == "+" ]] && echo "Volume Up" || echo "Volume Down")
+    VOLUME=$(echo $VOLUME_INFO | jq .volume)
+
+    if [ $(echo $VOLUME_INFO | jq .muted) == "true" ]
+    then
+        AUDIO_ICON="󰝟"
+        MUTED_STR="[muted]"
+    else
+        AUDIO_ICON="󰕾"
+        MUTED_STR=""
+    fi
+
+    TITLE=$(echo "$AUDIO_ICON $ACTION")
+    BODY=$(echo "$VOLUME% $MUTED_STR")
+    notify "$TITLE" "$BODY"
+}
+
+case $ACTION in
+    mute)
+        mute
+        ;;
+    set)
+        set_volume $2
+        ;;
+    *)
+        echo "Unknown action"
+        exit 1
+        ;;
+esac
+

config/kanata/kanata.kbd

@@ -0,0 +1,70 @@
+(defcfg
+  linux-dev-names-exclude (
+   "ZSA Technology Labs Voyager"
+   "ZSA Technology Labs Voyager Consumer Control"
+   "ZSA Technology Labs Voyager Keyboard"
+  )
+)
+
+
+(deflocalkeys-linux
+  ImpPt 99
+  º 41
+  ' 12
+  ¡ 13
+  ` 26
+  + 27
+  ñ 39
+  ´ 40
+  ç 43
+  < 86
+  - 53
+)
+
+(defsrc
+    esc  f1 f2 f3 f4 f5 f6 f7 f8 f9 f10 f11 f12 ins ImpPt del     home end pgup pgdn
+    º    1  2  3  4  5  6  7  8  9  0   '   ¡       Backspace     nlck kp/  kp*  kp-
+    tab  q  w  e  r  t  y  u  i  o  p   `   +                     kp7  kp8  kp9
+    caps a  s  d  f  g  h  j  k  l  ñ   ´   ç             ret     kp4  kp5  kp6  kp+
+    lsft <  z  x  c  v  b  n  m  ,  .   -                rsft     kp1  kp2  kp3
+    lctl    lmet lalt     spc     ralt   rctl          up              kp0  kp. kprt
+                                                 left down rght
+)
+
+(defvar
+    tap-time 200
+    hold-time 250
+)
+
+(defalias
+    caps (tap-hold $tap-time $hold-time caps (layer-while-held layer1))
+    a (tap-hold $tap-time $hold-time a lalt)
+    s (tap-hold $tap-time $hold-time s lsft)
+    d (tap-hold $tap-time $hold-time d lmet)
+    f (tap-hold $tap-time $hold-time f lctl)
+    g (tap-hold $tap-time $hold-time g (layer-while-held layer1))
+    h (tap-hold $tap-time $hold-time h rctl)
+    j (tap-hold $tap-time $hold-time j rmet)
+    k (tap-hold $tap-time $hold-time k rsft)
+    l (tap-hold $tap-time $hold-time l ralt)
+)
+
+(deflayer base
+    esc   mute vold volu -    brdn brup -  -  -  -   -   -   ins ImpPt del     home end pgup pgdn
+    º     1    2    3    4    5    6    7  8  9  0   '   ¡       Backspace     nlck kp/  kp*  kp-
+    tab   q    w    e    r    t    y    u  i  o  p   `   +                     kp7  kp8  kp9
+    @caps @a   @s   @d   @f   @g   @h   @j @k @l ñ   ´   ç             ret     kp4  kp5  kp6  kp+
+    lsft  <    z    x    c    v    b    n  m  ,  .   -                rsft     kp1  kp2  kp3
+    lctl     lmet lalt        spc          ralt   rctl          up              kp0  kp. kprt
+                                                          left down rght
+)
+
+(deflayer layer1
+    _  f1 f2 f3 f4 f5 f6   f7   f8 f9    f10 f11 f12 _   _       _     _  _  _  _
+    _  _  _  _  _  _  _    _    _  _     _   _   _               _     _  _  _  _
+    _  _  _  _  _  _  _    _    _  _     _   _   _                     _  _  _
+    _  _  _  _  _  _  left down up right _   _   _               _     _  _  _  _
+    _  _  _  _  _  _  _    _    _  _     _   _                   _     _  _  _
+    _     _  _             _             _       _           _            _  _  _
+                                                          _  _  _
+)

config/nomad.d/client.json

@@ -0,0 +1,13 @@
+{
+    "client": {
+        "enabled": true,
+        "network_interface": "tailscale0",
+
+        "options": {
+            "docker.volumes.enabled": true
+        }
+    },
+    "consul": {
+        "address": "127.0.0.1:8500"
+    }
+}

config/nomad.d/common.json

@@ -0,0 +1,11 @@
+{
+  "datacenter": "samfelag",
+  
+  "bind_addr": "{{ GetInterfaceIP \"tailscale0\" }}",
+
+  "advertise": {
+    "http": "{{ GetInterfaceIP \"tailscale0\" }}",
+    "rpc": "{{ GetInterfaceIP \"tailscale0\" }}",
+    "serf": "{{ GetInterfaceIP \"tailscale0\" }}"
+  }
+}

config/nomad.d/host-reykjavik.json

@@ -0,0 +1,10 @@
+{
+    "client": {
+        "host_volume": {
+            "test": {
+              "path": "/mnt/raid1/nomad_volumes/nextcloud/nextcloud",
+              "read_only": false
+            }
+        }
+    }
+}

config/nomad.d/host-thingvellir.hcl

@@ -0,0 +1,40 @@
+client {
+  # --- Network ---
+
+  host_network "public" {
+    interface = "ens3"
+  }
+
+  # --- Volumes ---
+  # DNS
+  host_volume "dns-pihole" {
+    path = "/var/lib/nomad_volumes/dns/pihole/etc-pihole"
+    read_only = false
+  }
+  host_volume "dns-dnsmasq" {
+    path = "/var/lib/nomad_volumes/dns/pihole/etc-dnsmasq.d"
+    read_only = false
+  }
+
+  # Caddy
+  host_volume "caddyfile" {
+    path = "/var/lib/nomad_volumes/caddy/Caddyfile"
+    read_only = false
+  }
+  host_volume "caddy-data" {
+    path = "/var/lib/nomad_volumes/caddy/data"
+    read_only = false
+  }
+
+  # Gitea
+  host_volume "gitea" {
+    path = "/mnt/vatnajokull/nomad_volumes/gitea/data"
+    read_only = false
+  }
+
+  # Folkugat
+  host_volume "folkugat" {
+    path = "/var/lib/nomad_volumes/folkugat"
+    read_only = false
+  }
+}

config/nomad.d/server.json

@@ -0,0 +1,6 @@
+{
+    "server": {
+      "enabled": true,
+      "bootstrap_expect": 1
+  }
+}

config/polybar/bars/bars.ini

@@ -0,0 +1,54 @@
+include-file = colours.ini
+include-directory = modules
+
+[bar/base]
+dpi      = 96
+width    = 100%
+height   = 32
+offset-x = 0
+offset-y = 0
+
+font-0 = "Iosevka Nerd Font:size=10;2"
+font-1 = "Iosevka Nerd Font:size=16;2"
+font-2 = "Iosevka Nerd Font:size=20;4"
+
+background = ${colours/bar.bg}
+foreground = ${colours/bar.fg}
+
+border-bottom-size  = 5
+border-top-size     = 5
+border-left-size    = 10
+border-right-size   = 10
+
+border-bottom-color = ${colours/bar.bg}
+border-top-color    = ${colours/bar.bg}
+border-left-color  = ${colours/bar.bg}
+border-right-color = ${colours/bar.bg}
+
+spacing            = 0
+padding-left       = 0
+padding-right      = 0
+module-margin-left = 0
+
+separator            = |
+separator-padding    = .5
+separator-foreground = ${colours/bar.bg}
+separator-background = ${colours/bar.bg}
+
+[bar/bottom]
+inherit = bar/base
+bottom = true
+
+modules-left  = workspaces 
+modules-right = wireless bluetooth volume battery
+
+tray-position = center
+tray-maxsize = 28
+
+[bar/top]
+inherit = bar/base
+bottom = false
+
+modules-left   = spotify  
+modules-center = date
+modules-right  = i3-mode

config/polybar/bars/colours.ini

@@ -0,0 +1,61 @@
+[colours]
+trans = #0000
+white = #fff
+black = #000
+gray = #555
+
+[colours/bar]
+bg = ${colour-scheme.base00}
+fg = ${colour-scheme.base05}
+
+[colours/date]
+bg = ${colour-scheme.base00}
+fg = ${colour-scheme.base05}
+
+[colours/battery]
+full-bg = ${colour-scheme.base00}
+full-fg = ${colour-scheme.base0C}
+charging-bg = ${colour-scheme.base00}
+charging-fg = ${colour-scheme.base0D}
+discharging-bg = ${colour-scheme.base00}
+discharging-fg = ${colour-scheme.base0F}
+low-bg = ${colour-scheme.base00}
+low-fg = ${colour-scheme.base0E}
+
+[colours/workspaces]
+focused-bg = ${colour-scheme.base02}
+focused-fg = ${colour-scheme.base04}
+unfocused-bg = ${colour-scheme.base01}
+unfocused-fg = ${colour-scheme.base05}
+urgent-bg = ${colour-scheme.base0E}
+urgent-fg = ${colour-scheme.base01}
+
+[colours/i3-mode]
+bg = ${colour-scheme.base0E}
+fg = ${colour-scheme.base01}
+
+[colours/volume]
+volume-bg = ${colour-scheme.base00}
+volume-fg = ${colour-scheme.base0C}
+muted-bg = ${colour-scheme.base00}
+muted-fg = ${colour-scheme.base0B}
+
+[colours/wireless]
+connected-bg = ${colour-scheme.base00}
+connected-fg = ${colour-scheme.base0C}
+disconnected-bg = ${colour-scheme.base00}
+disconnected-fg = ${colour-scheme.base0B}
+packetloss-bg = ${colour-scheme.base00}
+packetloss-fg = ${colour-scheme.base0E}
+
+[colours/bluetooth]
+bg = ${colour-scheme.base00}
+fg = ${colour-scheme.base0C}
+
+[colours/spotify]
+bg = ${colour-scheme.base00}
+fg = ${colour-scheme.base0A}
+
+[colours/ice]
+bg = ${colour-scheme.base00}
+fg = ${colour-scheme.base0A}

config/polybar/bars/modules/battery.ini

@@ -4,28 +4,28 @@ full-at       = 100
 low-at        = 20
 battery       = BAT0
 adapter       = ADP0
-poll-interval = 5
+poll-interval = 1
 
 format-full = <label-full>
-label-full            = "%{T2}%{T-} %percentage%%"
+label-full            = "%{T2}󰁹%{T-} %percentage%%"
 label-full-background = ${colours/battery.full-bg}
 label-full-foreground = ${colours/battery.full-fg}
 label-full-padding    = 1
 
 format-charging = <label-charging>
-label-charging            = "%{T2}%{T-} %percentage%%"
+label-charging            = "%{T2}󰂄%{T-} %percentage%%"
 label-charging-background = ${colours/battery.charging-bg}
 label-charging-foreground = ${colours/battery.charging-fg}
 label-charging-padding    = 1
 
 format-discharging = <label-discharging>
-label-discharging            = "%{T2}%{T-} %percentage%%"
+label-discharging            = "%{T2}󰂀%{T-} %percentage%%"
 label-discharging-background = ${colours/battery.discharging-bg}
 label-discharging-foreground = ${colours/battery.discharging-fg}
 label-discharging-padding    = 1
 
 format-low = <label-low>
-label-low            = "%{T2}%{T-} %percentage%%"
+label-low            = "%{T2}󰂃%{T-} %percentage%%"
 label-low-background = ${colours/battery.low-bg}
 label-low-foreground = ${colours/battery.low-fg}
 label-low-padding    = 1

config/polybar/bars/modules/bluetooth.ini

@@ -0,0 +1,9 @@
+[module/bluetooth]
+type = custom/script
+exec = ~/.config/rofi/menus/bluetooth/bluetooth.sh --status
+interval = 5
+click-left = ~/.config/rofi/menus/bluetooth/bluetooth.sh
+
+format-background = ${colours/bluetooth.bg}
+format-foreground = ${colours/bluetooth.fg}
+format-padding = 1

config/polybar/bars/modules/ice.ini

@@ -0,0 +1,8 @@
+[module/ice]
+type = custom/script
+exec = ~/.config/polybar/scripts/ice.sh
+interval = 5
+
+format-background = ${colours/ice.bg}
+format-foreground = ${colours/ice.fg}
+format-padding = 1

config/polybar/bars/modules/spotify.ini

@@ -0,0 +1,8 @@
+[module/spotify]
+type = custom/script
+exec = ~/.config/polybar/scripts/spotify.sh
+interval = 5
+
+format-background = ${colours/spotify.bg}
+format-foreground = ${colours/spotify.fg}
+format-padding = 1

config/polybar/bars/modules/volume.ini

@@ -3,13 +3,13 @@ type = internal/pulseaudio
 interval = 5
 
 format-volume = <label-volume>
-label-volume = %{T2}墳%{T-} %percentage%%
+label-volume = %{T2}󰕾 %{T-} %percentage%%
 label-volume-padding = 1
 label-volume-foreground = ${colours/volume.volume-fg}
 label-volume-background = ${colours/volume.volume-bg}
 
 format-muted = <label-muted>
-label-muted = %{T2}ﱝ%{T-} muted
+label-muted = %{T2}󰝟 %{T-} muted
 label-muted-padding = 1
 label-muted-foreground = ${colours/volume.muted-fg}
 label-muted-background = ${colours/volume.muted-bg}

config/polybar/bars/modules/wireless.ini

@@ -0,0 +1,28 @@
+[module/wireless]
+type = internal/network
+interface-type = wireless
+interval = 3.0
+
+accumulate-stats = true
+;unknown-as-up = true
+
+; The unit used for displaying network speeds
+; For example if set to the empty string, a speed of 5 KB/s is displayed as 5 K
+speed-unit = ''
+
+format-connected = <label-connected>
+label-connected = %{T2}󰖩 %{T-} %essid% (%local_ip%)
+label-connected-background = ${colours/wireless.connected-bg}
+label-connected-foreground = ${colours/wireless.connected-fg}
+label-connected-padding = 1
+
+format-disconnected = <label-disconnected>
+label-disconnected = %{T2}󰖪
+label-disconnected-background = ${colours/wireless.disconnected-bg}
+label-disconnected-foreground = ${colours/wireless.disconnected-fg}
+label-disconnected-padding = 1
+
+format-packetloss = <label-connected>*
+label-packetloss-background = ${colours/wireless.packetloss-bg}
+label-packetloss-foreground = ${colours/wireless.packetloss-fg}
+label-packetloss-padding = 1

config/polybar/config.ini

@@ -0,0 +1,3 @@
+# This file is generated by nixos-rebuild
+include-file = colour-scheme.ini
+include-file = bars/bars.ini

config/polybar/scripts/ice.sh

@@ -0,0 +1,33 @@
+#!/bin/sh
+# Show current train speed on ICE
+
+main() {
+  status=$(curl -X GET https://iceportal.de/api1/rs/status 2>/dev/null)
+  tripInfo=$(curl -X GET https://iceportal.de/api1/rs/tripInfo/trip 2>/dev/null)
+
+  if [[ -z $status || -z $tripInfo ]]; then
+      return
+  fi
+
+  # Speed
+  speed=$(echo $status | jq ".speed")
+
+  # Next stop
+  nextId=$(echo $tripInfo | jq ".trip.stopInfo.actualNext")
+  nextStop=$(echo $tripInfo | jq ".trip.stops[] | select( .station.evaNr == $nextId )")
+
+  nextStopName=$(echo $nextStop | jq -r ".station.name")
+  nextStopArrival=$(echo $nextStop | jq ".timetable.actualArrivalTime")
+
+  nextStopRemainingSeconds=$(expr $(expr $nextStopArrival / 1000) - $(date +%s))
+
+  if [[ ${nextStopRemainingSeconds:0:1} == "-" ]]; then
+    nextStopRemainingTime="Arribada!"
+  else
+    nextStopRemainingTime=$(date -d@$nextStopRemainingSeconds -u +%Hh%Mm%Ss)
+  fi
+
+  echo "  $nextStopName ·   $nextStopRemainingTime · 󰓅  $speed km/h"
+}
+
+main "$@"

config/polybar/scripts/spotify.sh

@@ -0,0 +1,20 @@
+#!/bin/sh
+
+main() {
+  pgrep spotify -l | grep -v spotify.sh > /dev/null || return
+
+  cmd="org.freedesktop.DBus.Properties.Get"
+  domain="org.mpris.MediaPlayer2"
+  path="/org/mpris/MediaPlayer2"
+
+  meta=$(dbus-send --print-reply --dest=${domain}.spotify /org/mpris/MediaPlayer2 ${cmd} string:${domain}.Player string:Metadata)
+
+  # Normal track
+  artist=$(echo "$meta" | sed -nr '/xesam:artist"/,+2s/^ +string "(.*)"$/\1/p' | tail -1  | sed 's/\&/\\&/g' | sed 's#\/#\\/#g')
+  album=$(echo "$meta" | sed -nr '/xesam:album"/,+2s/^ +variant +string "(.*)"$/\1/p' | tail -1| sed 's/\&/\\&/g'| sed 's#\/#\\/#g')
+  title=$(echo "$meta" | sed -nr '/xesam:title"/,+2s/^ +variant +string "(.*)"$/\1/p' | tail -1 | sed 's/\&/\\&/g'| sed 's#\/#\\/#g')
+
+  echo " ${*:-%artist% - %title%}" | sed "s/%artist%/$artist/g;s/%title%/$title/g;s/%album%/$album/g"i | sed "s/\&/\&/g" | sed "s#\/#\/#g"
+}
+
+main "$@"

config/rofi/menus/bluetooth/bluetooth.rasi

@@ -0,0 +1,139 @@
+/**
+ *
+ * Author : Marc Sastre, based on Aditya Shakya (adi1090x, Github : @adi1090x)
+ *
+ **/
+
+@import "~/.config/rofi/theme.rasi"
+
+/*****----- Configuration -----*****/
+configuration {
+    show-icons:                 false;
+}
+
+/*****----- Main Window -----*****/
+window {
+    /* properties for window widget */
+    transparency:                "real";
+    location:                    center;
+    anchor:                      center;
+    fullscreen:                  false;
+    width:                       800px;
+    x-offset:                    0px;
+    y-offset:                    0px;
+
+    /* properties for all widgets */
+    enabled:                     true;
+    margin:                      0px;
+    padding:                     0px;
+    border:                      2px solid;
+    border-radius:               15px;
+    border-color:                @background-alt;
+    cursor:                      "default";
+    background-color:            @background;
+}
+
+/*****----- Main Box -----*****/
+mainbox {
+    enabled:                     true;
+    spacing:                     15px;
+    margin:                      0px;
+    padding:                     30px;
+    border:                      0px solid;
+    border-radius:               0px;
+    border-color:                @selected;
+    background-color:            transparent;
+    children:                    [ "inputbar", "listview" ];
+}
+message {
+    enabled:                     true;
+    margin:                      0px;
+    padding:                     10px;
+    border:                      0px solid;
+    border-radius:               10px;
+    border-color:                @selected;
+    background-color:            @background-alt;
+    text-color:                  @foreground;
+}
+textbox {
+    background-color:            inherit;
+    text-color:                  inherit;
+    vertical-align:              0.5;
+    horizontal-align:            0.0;
+    placeholder-color:           @foreground;
+    blink:                       true;
+    markup:                      true;
+}
+
+/*****----- Inputbar -----*****/
+inputbar {
+    enabled:                     true;
+    spacing:                     10px;
+    padding:                     15px;
+    border-radius:               10px;
+    background-color:            @background-alt;
+    text-color:                  @foreground;
+    children:                    [ "textbox-prompt-colon", "entry" ];
+}
+textbox-prompt-colon {
+    enabled:                     true;
+    expand:                      false;
+    str:                         "";
+    background-color:            inherit;
+    text-color:                  inherit;
+}
+entry {
+    enabled:                     true;
+    background-color:            inherit;
+    text-color:                  inherit;
+    cursor:                      text;
+}
+
+/*****----- Listview -----*****/
+listview {
+    enabled:                     true;
+    columns:                     1;
+    lines:                       5;
+    cycle:                       true;
+    dynamic:                     true;
+    scrollbar:                   false;
+    layout:                      vertical;
+    reverse:                     false;
+    fixed-height:                true;
+    fixed-columns:               true;
+
+    spacing:                     5px;
+    margin:                      0px;
+    padding:                     0px;
+    border:                      0px solid;
+    border-radius:               0px;
+    border-color:                @selected;
+    background-color:            transparent;
+    text-color:                  @foreground;
+    cursor:                      "default";
+}
+
+/*****----- Elements -----*****/
+element {
+    enabled:                     true;
+    spacing:                     0px;
+    margin:                      0px;
+    padding:                     12px;
+    border:                      0px solid;
+    border-radius:               100%;
+    border-color:                @selected;
+    background-color:            transparent;
+    text-color:                  @foreground;
+    cursor:                      pointer;
+}
+element-text {
+    background-color:            transparent;
+    text-color:                  inherit;
+    cursor:                      inherit;
+    vertical-align:              0.5;
+    horizontal-align:            0.0;
+}
+element selected.normal {
+    background-color:            var(selected);
+    text-color:                  var(background);
+}

config/rofi/menus/bluetooth/bluetooth.sh

@@ -0,0 +1,322 @@
+ #!/usr/bin/env bash
+#             __ _       _     _            _              _   _
+#  _ __ ___  / _(_)     | |__ | |_   _  ___| |_ ___   ___ | |_| |__
+# | '__/ _ \| |_| |_____| '_ \| | | | |/ _ \ __/ _ \ / _ \| __| '_ \
+# | | | (_) |  _| |_____| |_) | | |_| |  __/ || (_) | (_) | |_| | | |
+# |_|  \___/|_| |_|     |_.__/|_|\__,_|\___|\__\___/ \___/ \__|_| |_|
+#
+# Author: Nick Clyde (clydedroid)
+#
+# A script that generates a rofi menu that uses bluetoothctl to
+# connect to bluetooth devices and display status info.
+#
+# Inspired by networkmanager-dmenu (https://github.com/firecat53/networkmanager-dmenu)
+# Thanks to x70b1 (https://github.com/polybar/polybar-scripts/tree/master/polybar-scripts/system-bluetooth-bluetoothctl)
+#
+# Depends on:
+#   Arch repositories: rofi, bluez-utils (contains bluetoothctl)
+
+# Constants
+divider=""
+goback="Back"
+
+# For debugging/development purposes
+# PREFIX=projects/samfelag/config/
+
+# Rofi command to pipe into, can add any options here
+dir="$HOME/$PREFIX.config/rofi/menus/bluetooth/"
+theme='bluetooth'
+
+rofi_command="rofi -dmenu -theme ${dir}/${theme}.rasi -i -p"
+
+# rofi -dmenu \
+#     -theme ${dir}/${theme}.rasi
+
+# Checks if bluetooth controller is powered on
+power_on() {
+    if bluetoothctl show | grep -q "Powered: yes"; then
+        return 0
+    else
+        return 1
+    fi
+}
+
+# Toggles power state
+toggle_power() {
+    if power_on; then
+        bluetoothctl power off
+        show_menu
+    else
+        if rfkill list bluetooth | grep -q 'blocked: yes'; then
+            rfkill unblock bluetooth && sleep 3
+        fi
+        bluetoothctl power on
+        show_menu
+    fi
+}
+
+# Checks if controller is scanning for new devices
+scan_on() {
+    if bluetoothctl show | grep -q "Discovering: yes"; then
+        echo "Scan: on"
+        return 0
+    else
+        echo "Scan: off"
+        return 1
+    fi
+}
+
+# Toggles scanning state
+toggle_scan() {
+    if scan_on; then
+        kill $(pgrep -f "bluetoothctl scan on")
+        bluetoothctl scan off
+        show_menu
+    else
+        bluetoothctl scan on &
+        echo "Scanning..."
+        sleep 5
+        show_menu
+    fi
+}
+
+# Checks if controller is able to pair to devices
+pairable_on() {
+    if bluetoothctl show | grep -q "Pairable: yes"; then
+        echo "Pairable: on"
+        return 0
+    else
+        echo "Pairable: off"
+        return 1
+    fi
+}
+
+# Toggles pairable state
+toggle_pairable() {
+    if pairable_on; then
+        bluetoothctl pairable off
+        show_menu
+    else
+        bluetoothctl pairable on
+        show_menu
+    fi
+}
+
+# Checks if controller is discoverable by other devices
+discoverable_on() {
+    if bluetoothctl show | grep -q "Discoverable: yes"; then
+        echo "Discoverable: on"
+        return 0
+    else
+        echo "Discoverable: off"
+        return 1
+    fi
+}
+
+# Toggles discoverable state
+toggle_discoverable() {
+    if discoverable_on; then
+        bluetoothctl discoverable off
+        show_menu
+    else
+        bluetoothctl discoverable on
+        show_menu
+    fi
+}
+
+# Checks if a device is connected
+device_connected() {
+    device_info=$(bluetoothctl info "$1")
+    if echo "$device_info" | grep -q "Connected: yes"; then
+        return 0
+    else
+        return 1
+    fi
+}
+
+# Toggles device connection
+toggle_connection() {
+    if device_connected $1; then
+        bluetoothctl disconnect $1
+        device_menu "$device"
+    else
+        bluetoothctl connect $1
+        device_menu "$device"
+    fi
+}
+
+# Checks if a device is paired
+device_paired() {
+    device_info=$(bluetoothctl info "$1")
+    if echo "$device_info" | grep -q "Paired: yes"; then
+        echo "Paired: yes"
+        return 0
+    else
+        echo "Paired: no"
+        return 1
+    fi
+}
+
+# Toggles device paired state
+toggle_paired() {
+    if device_paired $1; then
+        bluetoothctl remove $1
+        device_menu "$device"
+    else
+        bluetoothctl pair $1
+        device_menu "$device"
+    fi
+}
+
+# Checks if a device is trusted
+device_trusted() {
+    device_info=$(bluetoothctl info "$1")
+    if echo "$device_info" | grep -q "Trusted: yes"; then
+        echo "Trusted: yes"
+        return 0
+    else
+        echo "Trusted: no"
+        return 1
+    fi
+}
+
+# Toggles device connection
+toggle_trust() {
+    if device_trusted $1; then
+        bluetoothctl untrust $1
+        device_menu "$device"
+    else
+        bluetoothctl trust $1
+        device_menu "$device"
+    fi
+}
+
+# Prints a short string with the current bluetooth status
+# Useful for status bars like polybar, etc.
+print_status() {
+    if power_on; then
+        printf ''
+
+        paired_devices_cmd="paired-devices"
+
+        mapfile -t paired_devices < <(bluetoothctl $paired_devices_cmd | grep Device | cut -d ' ' -f 2)
+        counter=0
+
+        for device in "${paired_devices[@]}"; do
+            if device_connected $device; then
+                device_alias=$(bluetoothctl info $device | grep "Alias" | cut -d ' ' -f 2-)
+
+                if [ $counter -gt 0 ]; then
+                    printf ", %s" "$device_alias"
+                else
+                    printf " %s" "$device_alias"
+                fi
+
+                ((counter++))
+            fi
+        done
+        printf "\n"
+    else
+        echo "󰂲"
+    fi
+}
+
+# A submenu for a specific device that allows connecting, pairing, and trusting
+device_menu() {
+    device=$1
+
+    # Get device name and mac address
+    device_name=$(echo $device | cut -d ' ' -f 3-)
+    mac=$(echo $device | cut -d ' ' -f 2)
+
+    # Build options
+    if device_connected $mac; then
+        connected="Connected: yes"
+    else
+        connected="Connected: no"
+    fi
+    paired=$(device_paired $mac)
+    trusted=$(device_trusted $mac)
+    options="$connected\n$paired\n$trusted\n$divider\n$goback\nExit"
+
+    # Open rofi menu, read chosen option
+    chosen="$(echo -e "$options" | $rofi_command "$device_name")"
+
+    # Match chosen option to command
+    case $chosen in
+        "" | $divider)
+            echo "No option chosen."
+            ;;
+        $connected)
+            toggle_connection $mac
+            ;;
+        $paired)
+            toggle_paired $mac
+            ;;
+        $trusted)
+            toggle_trust $mac
+            ;;
+        $goback)
+            show_menu
+            ;;
+    esac
+}
+
+# Opens a rofi menu with current bluetooth status and options to connect
+show_menu() {
+    # Get menu options
+    if power_on; then
+        power="Power: on"
+
+        # Human-readable names of devices, one per line
+        # If scan is off, will only list paired devices
+        devices=$(bluetoothctl devices | grep Device | cut -d ' ' -f 3-)
+
+        # Get controller flags
+        scan=$(scan_on)
+        pairable=$(pairable_on)
+        discoverable=$(discoverable_on)
+
+        # Options passed to rofi
+        options="$devices\n$divider\n$power\n$scan\n$pairable\n$discoverable\nExit"
+    else
+        power="Power: off"
+        options="$power\nExit"
+    fi
+
+    # Open rofi menu, read chosen option
+    chosen="$(echo -e "$options" | $rofi_command "Bluetooth")"
+
+    # Match chosen option to command
+    case $chosen in
+        "" | $divider)
+            echo "No option chosen."
+            ;;
+        $power)
+            toggle_power
+            ;;
+        $scan)
+            toggle_scan
+            ;;
+        $discoverable)
+            toggle_discoverable
+            ;;
+        $pairable)
+            toggle_pairable
+            ;;
+        *)
+            device=$(bluetoothctl devices | grep "$chosen")
+            # Open a submenu if a device is selected
+            if [[ $device ]]; then device_menu "$device"; fi
+            ;;
+    esac
+}
+
+case "$1" in
+    --status)
+        print_status
+        ;;
+    *)
+        show_menu
+        ;;
+esac

config/rofi/menus/cliphist/cliphist.rasi

@@ -0,0 +1,147 @@
+/**
+ *
+ * Author : Marc Sastre, based on Aditya Shakya (adi1090x, Github : @adi1090x)
+ *
+ **/
+
+@import "~/.config/rofi/theme.rasi"
+
+/*****----- Configuration -----*****/
+configuration {
+    show-icons:                 false;
+}
+
+/*****----- Main Window -----*****/
+window {
+    /* properties for window widget */
+    transparency:                "real";
+    location:                    center;
+    anchor:                      center;
+    fullscreen:                  false;
+    width:                       800px;
+    x-offset:                    0px;
+    y-offset:                    0px;
+
+    /* properties for all widgets */
+    enabled:                     true;
+    margin:                      0px;
+    padding:                     0px;
+    border:                      2px solid;
+    border-radius:               15px;
+    border-color:                @background-alt;
+    cursor:                      "default";
+    background-color:            @background;
+}
+
+/*****----- Main Box -----*****/
+mainbox {
+    enabled:                     true;
+    spacing:                     15px;
+    margin:                      0px;
+    padding:                     30px;
+    border:                      0px solid;
+    border-radius:               0px;
+    border-color:                @selected;
+    background-color:            transparent;
+    children:                    [ "inputbar", "listview" ];
+}
+message {
+    enabled:                     true;
+    margin:                      0px;
+    padding:                     10px;
+    border:                      0px solid;
+    border-radius:               10px;
+    border-color:                @selected;
+    background-color:            @background-alt;
+    text-color:                  @foreground;
+}
+textbox {
+    background-color:            inherit;
+    text-color:                  inherit;
+    vertical-align:              0.5;
+    horizontal-align:            0.0;
+    placeholder-color:           @foreground;
+    blink:                       true;
+    markup:                      true;
+}
+
+/*****----- Inputbar -----*****/
+inputbar {
+    enabled:                     true;
+    spacing:                     10px;
+    padding:                     15px;
+    border-radius:               10px;
+    background-color:            @background-alt;
+    text-color:                  @foreground;
+    children:                    [ "textbox-prompt-colon", "entry" ];
+}
+textbox-prompt-colon {
+    enabled:                     true;
+    expand:                      false;
+    str:                         "";
+    background-color:            inherit;
+    text-color:                  inherit;
+}
+entry {
+    enabled:                     true;
+    background-color:            inherit;
+    text-color:                  inherit;
+    cursor:                      text;
+}
+
+/*****----- Listview -----*****/
+listview {
+    enabled:                     true;
+    columns:                     1;
+    lines:                       5;
+    cycle:                       true;
+    dynamic:                     true;
+    scrollbar:                   false;
+    layout:                      vertical;
+    reverse:                     false;
+    fixed-height:                true;
+    fixed-columns:               true;
+
+    spacing:                     5px;
+    margin:                      0px;
+    padding:                     0px;
+    border:                      0px solid;
+    border-radius:               0px;
+    border-color:                @selected;
+    background-color:            transparent;
+    text-color:                  @foreground;
+    cursor:                      "default";
+}
+
+/*****----- Elements -----*****/
+element {
+    enabled:                     true;
+    spacing:                     0px;
+    margin:                      0px;
+    padding:                     12px;
+    border:                      0px solid;
+    border-radius:               100%;
+    border-color:                @selected;
+    background-color:            transparent;
+    text-color:                  @foreground;
+    cursor:                      pointer;
+}
+element-text {
+    background-color:            transparent;
+    text-color:                  inherit;
+    cursor:                      inherit;
+    vertical-align:              0.5;
+    horizontal-align:            0.0;
+}
+element selected.normal {
+    background-color:            var(selected);
+    text-color:                  var(background);
+}
+element active {
+    background-color:            var(active);
+    text-color:                  var(background);
+}
+element selected.active {
+    background-color:            var(selected);
+    text-color:                  var(background);
+}

config/rofi/menus/cliphist/cliphist.sh

@@ -0,0 +1,12 @@
+#!/usr/bin/env bash
+
+# For debugging/development purposes
+# PREFIX=projects/samfelag/config/
+
+# Rofi command to pipe into, can add any options here
+dir="$HOME/$PREFIX.config/rofi/menus/cliphist/"
+theme='cliphist'
+
+rofi_command="rofi -dmenu -i -theme ${dir}/${theme}.rasi"
+
+cliphist list | $rofi_command | cliphist decode | wl-copy

config/rofi/menus/launcher/launcher.rasi

@@ -0,0 +1,199 @@
+/**
+ *
+ * Author : Marc Sastre, based on Aditya Shakya (adi1090x, Github : @adi1090x)
+ *
+ **/
+
+@import "~/.config/rofi/theme.rasi"
+
+/*****----- Configuration -----*****/
+configuration {
+	modi:                       "drun,run,filebrowser,window";
+    show-icons:                 true;
+    display-drun:               "APPS";
+    display-run:                "RUN";
+    display-filebrowser:        "FILES";
+    display-window:             "WINDOW";
+	drun-display-format:        "{name}";
+	window-format:              "{w} · {c} · {t}";
+}
+
+/*****----- Main Window -----*****/
+window {
+    /* properties for window widget */
+    transparency:                "real";
+    location:                    center;
+    anchor:                      center;
+    fullscreen:                  false;
+    width:                       1000px;
+    x-offset:                    0px;
+    y-offset:                    0px;
+
+    /* properties for all widgets */
+    enabled:                     true;
+    border:                      2px solid;
+    border-radius:               15px;
+    border-color:                @background-alt;
+    cursor:                      "default";
+    background-color:            @background;
+}
+
+/*****----- Main Box -----*****/
+mainbox {
+    enabled:                     true;
+    spacing:                     0px;
+    background-color:            transparent;
+    orientation:                 horizontal;
+    children:                    [ "imagebox", "listbox" ];
+}
+
+imagebox {
+    padding:                     20px;
+    background-color:            transparent;
+    background-image:            url("~/.config/rofi/nix.png", width);
+    orientation:                 vertical;
+    children:                    [ "inputbar", "dummy", "mode-switcher" ];
+}
+
+listbox {
+    spacing:                     20px;
+    padding:                     20px;
+    background-color:            transparent;
+    orientation:                 vertical;
+    children:                    [ "message", "listview" ];
+}
+
+dummy {
+    background-color:            transparent;
+}
+
+/*****----- Inputbar -----*****/
+inputbar {
+    enabled:                     true;
+    spacing:                     10px;
+    padding:                     15px;
+    border-radius:               10px;
+    background-color:            @background-alt;
+    text-color:                  @foreground;
+    children:                    [ "textbox-prompt-colon", "entry" ];
+}
+textbox-prompt-colon {
+    enabled:                     true;
+    expand:                      false;
+    str:                         "";
+    background-color:            inherit;
+    text-color:                  inherit;
+}
+entry {
+    enabled:                     true;
+    background-color:            inherit;
+    text-color:                  inherit;
+    cursor:                      text;
+    placeholder:                 "Search";
+    placeholder-color:           inherit;
+}
+
+/*****----- Mode Switcher -----*****/
+mode-switcher{
+    enabled:                     true;
+    spacing:                     20px;
+    background-color:            transparent;
+    text-color:                  @foreground;
+}
+button {
+    padding:                     15px;
+    border-radius:               10px;
+    background-color:            @background-alt;
+    text-color:                  inherit;
+    cursor:                      pointer;
+}
+button selected {
+    background-color:            @selected;
+    text-color:                  @foreground;
+}
+
+/*****----- Listview -----*****/
+listview {
+    enabled:                     true;
+    columns:                     1;
+    lines:                       8;
+    cycle:                       true;
+    dynamic:                     true;
+    scrollbar:                   false;
+    layout:                      vertical;
+    reverse:                     false;
+    fixed-height:                true;
+    fixed-columns:               true;
+
+    spacing:                     10px;
+    background-color:            transparent;
+    text-color:                  @foreground;
+    cursor:                      "default";
+}
+
+/*****----- Elements -----*****/
+element {
+    enabled:                     true;
+    spacing:                     15px;
+    padding:                     8px;
+    border-radius:               10px;
+    background-color:            transparent;
+    text-color:                  @foreground;
+    cursor:                      pointer;
+}
+element normal.normal {
+    background-color:            inherit;
+    text-color:                  inherit;
+}
+element normal.urgent {
+    background-color:            @urgent;
+    text-color:                  @foreground;
+}
+element normal.active {
+    background-color:            @active;
+    text-color:                  @foreground;
+}
+element selected.normal {
+    background-color:            @selected;
+    text-color:                  @foreground;
+}
+element selected.urgent {
+    background-color:            @urgent;
+    text-color:                  @foreground;
+}
+element selected.active {
+    background-color:            @urgent;
+    text-color:                  @foreground;
+}
+element-icon {
+    background-color:            transparent;
+    text-color:                  inherit;
+    size:                        32px;
+    cursor:                      inherit;
+}
+element-text {
+    background-color:            transparent;
+    text-color:                  inherit;
+    cursor:                      inherit;
+    vertical-align:              0.5;
+    horizontal-align:            0.0;
+}
+
+/*****----- Message -----*****/
+message {
+    background-color:            transparent;
+}
+textbox {
+    padding:                     15px;
+    border-radius:               10px;
+    background-color:            @background-alt;
+    text-color:                  @foreground;
+    vertical-align:              0.5;
+    horizontal-align:            0.0;
+}
+error-message {
+    padding:                     15px;
+    border-radius:               20px;
+    background-color:            @background;
+    text-color:                  @foreground;
+}

config/rofi/menus/launcher/launcher.sh

@@ -0,0 +1,13 @@
+#!/usr/bin/env sh
+
+## Author : Marc Sastre, based on Aditya Shakya (adi1090x, Github : @adi1090x)
+## Rofi   : Launcher
+
+# For debugging/development purposes
+# PREFIX=projects/samfelag/config/
+
+# Rofi command to pipe into, can add any options here
+dir="$HOME/$PREFIX.config/rofi/menus/launcher/"
+theme='launcher'
+
+rofi -show drun -theme ${dir}/${theme}.rasi

config/rofi/menus/pass/pass.rasi

@@ -0,0 +1,147 @@
+/**
+ *
+ * Author : Marc Sastre, based on Aditya Shakya (adi1090x, Github : @adi1090x)
+ *
+ **/
+
+@import "~/.config/rofi/theme.rasi"
+
+/*****----- Configuration -----*****/
+configuration {
+    show-icons:                 false;
+}
+
+/*****----- Main Window -----*****/
+window {
+    /* properties for window widget */
+    transparency:                "real";
+    location:                    center;
+    anchor:                      center;
+    fullscreen:                  false;
+    width:                       800px;
+    x-offset:                    0px;
+    y-offset:                    0px;
+
+    /* properties for all widgets */
+    enabled:                     true;
+    margin:                      0px;
+    padding:                     0px;
+    border:                      2px solid;
+    border-radius:               15px;
+    border-color:                @background-alt;
+    cursor:                      "default";
+    background-color:            @background;
+}
+
+/*****----- Main Box -----*****/
+mainbox {
+    enabled:                     true;
+    spacing:                     15px;
+    margin:                      0px;
+    padding:                     30px;
+    border:                      0px solid;
+    border-radius:               0px;
+    border-color:                @selected;
+    background-color:            transparent;
+    children:                    [ "message", "inputbar", "listview" ];
+}
+message {
+    enabled:                     true;
+    margin:                      0px;
+    padding:                     10px;
+    border:                      0px solid;
+    border-radius:               10px;
+    border-color:                @selected;
+    background-color:            @background-alt;
+    text-color:                  @foreground;
+}
+textbox {
+    background-color:            inherit;
+    text-color:                  inherit;
+    vertical-align:              0.5;
+    horizontal-align:            0.0;
+    placeholder-color:           @foreground;
+    blink:                       true;
+    markup:                      true;
+}
+
+/*****----- Inputbar -----*****/
+inputbar {
+    enabled:                     true;
+    spacing:                     10px;
+    padding:                     15px;
+    border-radius:               10px;
+    background-color:            @background-alt;
+    text-color:                  @foreground;
+    children:                    [ "textbox-prompt-colon", "entry" ];
+}
+textbox-prompt-colon {
+    enabled:                     true;
+    expand:                      false;
+    str:                         "";
+    background-color:            inherit;
+    text-color:                  inherit;
+}
+entry {
+    enabled:                     true;
+    background-color:            inherit;
+    text-color:                  inherit;
+    cursor:                      text;
+}
+
+/*****----- Listview -----*****/
+listview {
+    enabled:                     true;
+    columns:                     1;
+    lines:                       5;
+    cycle:                       true;
+    dynamic:                     true;
+    scrollbar:                   false;
+    layout:                      vertical;
+    reverse:                     false;
+    fixed-height:                true;
+    fixed-columns:               true;
+
+    spacing:                     5px;
+    margin:                      0px;
+    padding:                     0px;
+    border:                      0px solid;
+    border-radius:               0px;
+    border-color:                @selected;
+    background-color:            transparent;
+    text-color:                  @foreground;
+    cursor:                      "default";
+}
+
+/*****----- Elements -----*****/
+element {
+    enabled:                     true;
+    spacing:                     0px;
+    margin:                      0px;
+    padding:                     12px;
+    border:                      0px solid;
+    border-radius:               100%;
+    border-color:                @selected;
+    background-color:            transparent;
+    text-color:                  @foreground;
+    cursor:                      pointer;
+}
+element-text {
+    background-color:            transparent;
+    text-color:                  inherit;
+    cursor:                      inherit;
+    vertical-align:              0.5;
+    horizontal-align:            0.0;
+}
+element selected.normal {
+    background-color:            var(selected);
+    text-color:                  var(background);
+}
+element active {
+    background-color:            var(active);
+    text-color:                  var(background);
+}
+element selected.active {
+    background-color:            var(selected);
+    text-color:                  var(background);
+}

config/rofi/menus/powermenu/powermenu.rasi

@@ -0,0 +1,115 @@
+/**
+ *
+ * Author : Marc Sastre, based on Aditya Shakya (adi1090x, Github : @adi1090x)
+ *
+ **/
+
+@import "~/.config/rofi/theme.rasi"
+
+/*****----- Configuration -----*****/
+configuration {
+    show-icons:                 false;
+}
+
+/*****----- Main Window -----*****/
+window {
+    /* properties for window widget */
+    transparency:                "real";
+    location:                    center;
+    anchor:                      center;
+    fullscreen:                  false;
+    width:                       500px;
+    x-offset:                    0px;
+    y-offset:                    0px;
+
+    /* properties for all widgets */
+    enabled:                     true;
+    margin:                      0px;
+    padding:                     0px;
+    border:                      2px solid;
+    border-radius:               15px;
+    border-color:                @background-alt;
+    cursor:                      "default";
+    background-color:            @background;
+}
+
+/*****----- Main Box -----*****/
+mainbox {
+    enabled:                     true;
+    spacing:                     15px;
+    margin:                      0px;
+    padding:                     30px;
+    border:                      0px solid;
+    border-radius:               0px;
+    border-color:                @selected;
+    background-color:            transparent;
+    children:                    [ "listview" ];
+}
+message {
+    enabled:                     true;
+    margin:                      0px;
+    padding:                     10px;
+    border:                      0px solid;
+    border-radius:               10px;
+    border-color:                @selected;
+    background-color:            @background-alt;
+    text-color:                  @foreground;
+}
+textbox {
+    background-color:            inherit;
+    text-color:                  inherit;
+    vertical-align:              0.5;
+    horizontal-align:            0.0;
+    placeholder-color:           @foreground;
+    blink:                       true;
+    markup:                      true;
+}
+
+/*****----- Listview -----*****/
+listview {
+    enabled:                     true;
+    columns:                     1;
+    lines:                       5;
+    cycle:                       true;
+    dynamic:                     true;
+    scrollbar:                   false;
+    layout:                      vertical;
+    reverse:                     false;
+    fixed-height:                true;
+    fixed-columns:               true;
+
+    spacing:                     5px;
+    margin:                      0px;
+    padding:                     0px;
+    border:                      0px solid;
+    border-radius:               0px;
+    border-color:                @selected;
+    background-color:            transparent;
+    text-color:                  @foreground;
+    cursor:                      "default";
+}
+
+/*****----- Elements -----*****/
+element {
+    enabled:                     true;
+    spacing:                     0px;
+    margin:                      0px;
+    padding:                     12px;
+    border:                      0px solid;
+    border-radius:               100%;
+    border-color:                @selected;
+    background-color:            transparent;
+    text-color:                  @foreground;
+    cursor:                      pointer;
+}
+element-text {
+    background-color:            transparent;
+    text-color:                  inherit;
+    cursor:                      inherit;
+    vertical-align:              0.5;
+    horizontal-align:            0.0;
+}
+element selected.normal {
+    background-color:            var(selected);
+    text-color:                  var(background);
+}

config/rofi/menus/powermenu/powermenu.sh

@@ -0,0 +1,94 @@
+#!/usr/bin/env sh
+
+## Author : Marc Sastre, based on Aditya Shakya (adi1090x, Github : @adi1090x)
+## Rofi   : Power Menu
+
+# Current Theme
+dir="$HOME/.config/rofi/menus/powermenu/"
+theme='powermenu'
+
+# CMDs
+
+# Options
+shutdown=' Shutdown'
+reboot=' Reboot'
+lock=' Lock'
+suspend='󰏦 Suspend'
+logout='󰍃 Logout'
+yes='Yes'
+no='No'
+
+# Rofi CMD
+rofi_cmd() {
+	rofi -dmenu \
+		-theme ${dir}/${theme}.rasi
+}
+
+# Confirmation CMD
+confirm_cmd() {
+	rofi -theme-str 'window {location: center; anchor: center; fullscreen: false; width: 250px;}' \
+		-theme-str 'mainbox {children: [ "message", "listview" ];}' \
+		-theme-str 'listview {columns: 2; lines: 1;}' \
+		-theme-str 'element-text {horizontal-align: 0.5;}' \
+		-theme-str 'textbox {horizontal-align: 0.5;}' \
+		-dmenu \
+		-p 'Confirmation' \
+		-mesg 'Are you Sure?' \
+		-theme ${dir}/${theme}.rasi
+}
+
+# Ask for confirmation
+confirm_exit() {
+	echo -e "$yes\n$no" | confirm_cmd
+}
+
+# Pass variables to rofi dmenu
+run_rofi() {
+	echo -e "$lock\n$suspend\n$logout\n$reboot\n$shutdown" | rofi_cmd
+}
+
+# Execute Command
+run_cmd() {
+	selected="$(confirm_exit)"
+	if [[ "$selected" == "$yes" ]]; then
+		if [[ $1 == '--shutdown' ]]; then
+			systemctl poweroff -i
+		elif [[ $1 == '--reboot' ]]; then
+			systemctl reboot
+		elif [[ $1 == '--suspend' ]]; then
+			systemctl suspend
+		elif [[ $1 == '--logout' ]]; then
+			if [[ "$DESKTOP_SESSION" == 'i3' ]]; then
+				i3-msg exit
+			elif [[ ! -z $HYPRLAND_INSTANCE_SIGNATURE ]]; then
+				hyprctl dispatch exit
+			fi
+		fi
+	else
+		exit 0
+	fi
+}
+
+# Actions
+chosen="$(run_rofi)"
+case ${chosen} in
+    $shutdown)
+		run_cmd --shutdown
+        ;;
+    $reboot)
+		run_cmd --reboot
+        ;;
+    $lock)
+		if command -v i3lock-color; then
+			i3lock-color -c 808F85 && sleep 1
+		elif command -v hyprlock; then
+			hyprlock
+		fi
+        ;;
+    $suspend)
+		run_cmd --suspend
+        ;;
+    $logout)
+		run_cmd --logout
+        ;;
+esac

config/rofi/menus/wifi/wifi.rasi

@@ -0,0 +1,147 @@
+/**
+ *
+ * Author : Marc Sastre, based on Aditya Shakya (adi1090x, Github : @adi1090x)
+ *
+ **/
+
+@import "~/.config/rofi/theme.rasi"
+
+/*****----- Configuration -----*****/
+configuration {
+    show-icons:                 false;
+}
+
+/*****----- Main Window -----*****/
+window {
+    /* properties for window widget */
+    transparency:                "real";
+    location:                    center;
+    anchor:                      center;
+    fullscreen:                  false;
+    width:                       800px;
+    x-offset:                    0px;
+    y-offset:                    0px;
+
+    /* properties for all widgets */
+    enabled:                     true;
+    margin:                      0px;
+    padding:                     0px;
+    border:                      2px solid;
+    border-radius:               15px;
+    border-color:                @background-alt;
+    cursor:                      "default";
+    background-color:            @background;
+}
+
+/*****----- Main Box -----*****/
+mainbox {
+    enabled:                     true;
+    spacing:                     15px;
+    margin:                      0px;
+    padding:                     30px;
+    border:                      0px solid;
+    border-radius:               0px;
+    border-color:                @selected;
+    background-color:            transparent;
+    children:                    [ "inputbar", "listview" ];
+}
+message {
+    enabled:                     true;
+    margin:                      0px;
+    padding:                     10px;
+    border:                      0px solid;
+    border-radius:               10px;
+    border-color:                @selected;
+    background-color:            @background-alt;
+    text-color:                  @foreground;
+}
+textbox {
+    background-color:            inherit;
+    text-color:                  inherit;
+    vertical-align:              0.5;
+    horizontal-align:            0.0;
+    placeholder-color:           @foreground;
+    blink:                       true;
+    markup:                      true;
+}
+
+/*****----- Inputbar -----*****/
+inputbar {
+    enabled:                     true;
+    spacing:                     10px;
+    padding:                     15px;
+    border-radius:               10px;
+    background-color:            @background-alt;
+    text-color:                  @foreground;
+    children:                    [ "textbox-prompt-colon", "entry" ];
+}
+textbox-prompt-colon {
+    enabled:                     true;
+    expand:                      false;
+    str:                         "󰖩";
+    background-color:            inherit;
+    text-color:                  inherit;
+}
+entry {
+    enabled:                     true;
+    background-color:            inherit;
+    text-color:                  inherit;
+    cursor:                      text;
+}
+
+/*****----- Listview -----*****/
+listview {
+    enabled:                     true;
+    columns:                     1;
+    lines:                       5;
+    cycle:                       true;
+    dynamic:                     true;
+    scrollbar:                   false;
+    layout:                      vertical;
+    reverse:                     false;
+    fixed-height:                true;
+    fixed-columns:               true;
+
+    spacing:                     5px;
+    margin:                      0px;
+    padding:                     0px;
+    border:                      0px solid;
+    border-radius:               0px;
+    border-color:                @selected;
+    background-color:            transparent;
+    text-color:                  @foreground;
+    cursor:                      "default";
+}
+
+/*****----- Elements -----*****/
+element {
+    enabled:                     true;
+    spacing:                     0px;
+    margin:                      0px;
+    padding:                     12px;
+    border:                      0px solid;
+    border-radius:               100%;
+    border-color:                @selected;
+    background-color:            transparent;
+    text-color:                  @foreground;
+    cursor:                      pointer;
+}
+element-text {
+    background-color:            transparent;
+    text-color:                  inherit;
+    cursor:                      inherit;
+    vertical-align:              0.5;
+    horizontal-align:            0.0;
+}
+element selected.normal {
+    background-color:            var(selected);
+    text-color:                  var(background);
+}
+element active {
+    background-color:            var(active);
+    text-color:                  var(background);
+}
+element selected.active {
+    background-color:            var(selected);
+    text-color:                  var(background);
+}

config/rofi/menus/wifi/wifi.sh

@@ -0,0 +1,83 @@
+#!/usr/bin/env bash
+
+# Shamelessly stolen from https://github.com/zbaylin/rofi-wifi-menu
+
+# Starts a scan of available broadcasting SSIDs
+# nmcli dev wifi rescan
+
+
+# For debugging/development purposes
+# PREFIX=projects/samfelag/config/
+
+# Rofi command to pipe into, can add any options here
+dir="$HOME/$PREFIX.config/rofi/menus/wifi/"
+theme='wifi'
+
+rofi_command="rofi -dmenu -i -theme ${dir}/${theme}.rasi"
+
+FIELDS=SSID,SECURITY,BARS
+
+LIST=$(nmcli --fields "$FIELDS" device wifi list | sed '/^--/d')
+# Gives a list of known connections so we can parse it later
+KNOWNCON=$(nmcli connection show)
+# Really janky way of telling if there is currently a connection
+CONSTATE=$(nmcli -fields WIFI g)
+CURRSSID=$(LANGUAGE=C nmcli -t -f active,ssid dev wifi | awk -F: '$1 ~ /^yes/ {print $2}')
+
+if [[ ! -z $CURRSSID ]]; then
+	HIGHLINE=$(echo  "$(echo "$LIST" | awk -F "[  ]{2,}" '{print $1}' | grep -Fxn -m 1 "$CURRSSID" | awk -F ":" '{print $1}') + 1" | bc )
+fi
+
+if [[ "$CONSTATE" =~ "habilitat" ]]; then
+	TOGGLE="toggle off"
+elif [[ "$CONSTATE" =~ "deshabilitat" ]]; then
+	TOGGLE="toggle on"
+fi
+
+
+CHENTRY=$(echo -e "$TOGGLE\nmanual\n$LIST" | uniq -u | $rofi_command -p "Wi-Fi SSID: " -a "$HIGHLINE")
+#echo "$CHENTRY"
+CHSSID=$(echo "$CHENTRY" | sed  's/\s\{2,\}/\|/g' | awk -F "|" '{print $1}')
+#echo "$CHSSID"
+
+# If the user inputs "manual" as their SSID in the start window, it will bring them to this screen
+if [ "$CHENTRY" = "manual" ] ; then
+	# Manual entry of the SSID and password (if appplicable)
+	MSSID=$(echo "enter the SSID of the network (SSID,password)" | $rofi_command -p "Manual Entry: " -lines 1)
+	# Separating the password from the entered string
+	MPASS=$(echo "$MSSID" | awk -F "," '{print $2}')
+
+	#echo "$MSSID"
+	#echo "$MPASS"
+
+	# If the user entered a manual password, then use the password nmcli command
+	if [ "$MPASS" = "" ]; then
+		nmcli dev wifi con "$MSSID"
+	else
+		nmcli dev wifi con "$MSSID" password "$MPASS"
+	fi
+
+elif [ "$CHENTRY" = "toggle on" ]; then
+	nmcli radio wifi on
+
+elif [ "$CHENTRY" = "toggle off" ]; then
+	nmcli radio wifi off
+
+else
+
+	# If the connection is already in use, then this will still be able to get the SSID
+	if [ "$CHSSID" = "*" ]; then
+		CHSSID=$(echo "$CHENTRY" | sed  's/\s\{2,\}/\|/g' | awk -F "|" '{print $3}')
+	fi
+
+	# Parses the list of preconfigured connections to see if it already contains the chosen SSID. This speeds up the connection process
+	if [[ $(echo "$KNOWNCON" | grep "$CHSSID") = "$CHSSID" ]]; then
+		nmcli con up "$CHSSID"
+	else
+		if [[ "$CHENTRY" =~ "WPA2" ]] || [[ "$CHENTRY" =~ "WEP" ]]; then
+			WIFIPASS=$(echo "Enter password, if connection is stored, hit enter" | $rofi_command -p "Password: " -lines 1 )
+		fi
+		nmcli dev wifi con "$CHSSID" password "$WIFIPASS"
+	fi
+
+fi

config/shell/sh/002-aliases.sh

@@ -1,5 +1,5 @@
-[[ -x "$(command -v exa)" ]] && {
-  alias ll="exa --group-directories-first --color=auto --git -la"
+[[ -x "$(command -v eza)" ]] && {
+  alias ll="eza --group-directories-first --color=auto --icons=auto --git -la"
 } || {
   alias ll="ls -alh --color=always --group-directories-first"
 }

config/shell/zsh/002-fzf.zsh

@@ -0,0 +1,4 @@
+if [ -n "${commands[fzf-share]}" ]; then
+  source "$(fzf-share)/key-bindings.zsh"
+  source "$(fzf-share)/completion.zsh"
+fi

config/shell/zsh/003-p10k-fix.zsh

@@ -0,0 +1 @@
+unset ZSH_AUTOSUGGEST_USE_ASYNC 

config/shell/zsh/004-zoxide.zsh

@@ -0,0 +1 @@
+[[ -x "$(command -v zoxide)" ]] && eval "$(zoxide init --cmd cd zsh)"

data/devenv/devenv.sh

@@ -0,0 +1,93 @@
+#!/usr/bin/env sh
+
+SANDBOXES_DIR=$HOME/sandbox
+TEMPLATES_DIR=$XDG_DATA_HOME/devenv/templates
+
+list_templates() {
+    echo "The available templates are:"
+    ls $TEMPLATES_DIR
+}
+
+check_template () {
+    TEMPLATE=$1
+    if [ -z "$TEMPLATE" ]; then
+        echo "No template given"
+        list_templates
+        return 1
+    elif [ ! -e "$TEMPLATES_DIR/$TEMPLATE" ]; then
+        echo "The given template '$TEMPLATE' doesn't exist!"
+        list_templates
+        return 1
+    fi
+}
+
+devenv_install() {
+    TEMPLATE=$1
+    install -m 644 $TEMPLATES_DIR/$TEMPLATE/* ./
+    echo "use flake . --impure" > .envrc
+    direnv allow
+}
+
+devenv_init() {
+    TEMPLATE=$1
+    if ! check_template $TEMPLATE ; then
+        return 1
+    fi
+    devenv_install $TEMPLATE
+}
+
+devenv_sandbox() {
+    DIRECTORY=$1
+    if [ -z "$DIRECTORY" ]; then
+        show_help_sandbox
+        return 1
+    fi
+    SANDBOX_DIR="$SANDBOXES_DIR/$DIRECTORY"
+    TEMPLATE=$2
+    if [ -z "$TEMPLATE" ]; then
+        TEMPLATE=$DIRECTORY
+    fi
+    if ! check_template $TEMPLATE; then
+        return 1
+    fi
+    if [ ! -e $SANDBOX_DIR ]; then
+        echo "Creating sandbox at $SANDBOX_DIR with template $TEMPLATE"
+        mkdir -p $SANDBOX_DIR
+        cd $SANDBOX_DIR
+        devenv_init $TEMPLATE
+    else
+        cd $SANDBOX_DIR
+    fi
+}
+
+show_help_sandbox() {
+    echo "Usage: devenv sandbox <directory> [<template>]"
+    echo ""
+    echo "  directory: The sandbox directory to go to."
+    echo "  template: If the directory doesn't exist, the template to use for that sandbox"
+    echo "            Defaults to directory if not given."
+    echo ""
+}
+
+show_help() {
+    echo "Usage: devenv <action>"
+    echo "Available actions:"
+    echo ""
+    echo "  init: Initialize a dev env in the current directory"
+    echo "  sandbox: Go to a sandbox directory using a template"
+    echo ""
+}
+
+case "$1" in
+    init)
+        shift
+        devenv_init $@
+        ;;
+    sandbox)
+        shift
+        devenv_sandbox $@
+        ;;
+    *)
+        show_help
+        ;;
+esac

data/devenv/templates/clojure/flake.nix

@@ -0,0 +1,28 @@
+{
+  description = "Development flake for this clojure project";
+  inputs.nixpkgs.url = "github:NixOS/nixpkgs/nixpkgs-unstable";
+  inputs.flake-utils.url = "github:numtide/flake-utils";
+
+  outputs = { self, nixpkgs, flake-utils }:
+    flake-utils.lib.eachDefaultSystem (system: let
+
+      pkgs = nixpkgs.legacyPackages.${system};
+
+      projectDependencies = with pkgs; [
+      ];
+
+    in {
+      devShells.default = pkgs.mkShell {
+        nativeBuildInputs = [ pkgs.bashInteractive ];
+        buildInputs = with pkgs; [
+          # Core clojure dependencies
+          clojure
+          leiningen
+          # IDE tools
+          clojure-lsp
+          # Development tools
+        ] ++ projectDependencies;
+
+      };
+    });
+}

data/devenv/templates/python312/flake.nix

@@ -0,0 +1,37 @@
+{
+  description = "Development flake for this python project";
+  inputs.nixpkgs.url = "github:nixos/nixpkgs/nixos-24.05";
+  inputs.flake-utils.url = "github:numtide/flake-utils";
+
+  outputs = { self, nixpkgs, flake-utils }:
+    flake-utils.lib.eachDefaultSystem (system: let
+
+      pkgs = nixpkgs.legacyPackages.${system};
+
+      python = pkgs.python312;
+      pythonPackages = pkgs.python312Packages;
+
+      projectDependencies = with pythonPackages; [
+      ];
+
+    in {
+      devShells.default = pkgs.mkShell {
+        nativeBuildInputs = [ pkgs.bashInteractive ];
+        buildInputs = with pkgs; [
+          # Core python dependencies
+          python
+          pythonPackages.pip
+          pythonPackages.virtualenv
+          # IDE tools
+          pythonPackages.isort
+          nodePackages.pyright
+          # Development tools
+          black
+          pythonPackages.ipython
+          pythonPackages.pytest
+          pythonPackages.setuptools
+        ] ++ projectDependencies;
+
+      };
+    });
+}

data/devenv/templates/ros/flake.nix

@@ -0,0 +1,55 @@
+{
+  description = "Development flake for this ROS project";
+
+  inputs = {
+    nixpkgs.url = "github:NixOS/nixpkgs/nixpkgs-unstable";
+    flake-utils.url = "github:numtide/flake-utils";
+
+    ros-overlay.url = "github:lopsided98/nix-ros-overlay";
+    ros-overlay.inputs.nixpkgs.follows = "nixpkgs";
+  };
+
+
+  outputs = { self, nixpkgs, flake-utils, ros-overlay }:
+    flake-utils.lib.eachDefaultSystem (system: let
+
+      pkgs = import nixpkgs {
+        inherit system;
+        overlays = [ ros-overlay.overlays.default ];
+      };
+
+    in {
+      devShells.default = pkgs.mkShell {
+        nativeBuildInputs = with pkgs; [
+          # Non-ROS packages
+        ] ++ (with rosPackages.humble; [
+          # ROS packages
+          (buildEnv {
+            paths = [
+              # Core
+              ros-environment
+              colcon
+              # Ros2
+              ros2run
+              ros2param
+              ros2topic
+              ros2node
+              ros2interface
+              ros2service
+              ros2action
+              ros2pkg
+              # RQT
+              rqt
+              rqt-msg
+              rqt-topic
+              rqt-action
+              rqt-service-caller
+              rqt-graph
+              # Extra
+           ];
+          })
+        ]);
+
+      };
+    });
+}

data/devenv/templates/rust/Cargo.toml

@@ -0,0 +1,8 @@
+[package]
+name = ""
+version = "0.1.0"
+edition = "2021"
+
+# See more keys and their definitions at https://doc.rust-lang.org/cargo/reference/manifest.html
+
+[dependencies]

data/devenv/templates/rust/flake.nix

@@ -0,0 +1,32 @@
+{
+  description = "Development flake for this rust project";
+  inputs.nixpkgs.url = "github:NixOS/nixpkgs/nixpkgs-unstable";
+  inputs.flake-utils.url = "github:numtide/flake-utils";
+
+  outputs = { self, nixpkgs, flake-utils }:
+    flake-utils.lib.eachDefaultSystem (system: let
+
+      pkgs = nixpkgs.legacyPackages.${system};
+
+      projectDependencies = with pkgs; [
+      ];
+
+    in {
+      devShells.default = pkgs.mkShell {
+        nativeBuildInputs = [ pkgs.bashInteractive ];
+        buildInputs = with pkgs; [
+          # Core rust dependencies
+          rustc
+          cargo
+          # Development tools
+          rustfmt
+          rust-analyzer
+          clippy
+        ] ++ projectDependencies;
+
+        LD_LIBRARY_PATH = nixpkgs.lib.makeLibraryPath projectDependencies;
+
+        RUST_BACKTRACE = 1;
+      };
+    });
+}

data/nomad/caddy.nomad

@@ -0,0 +1,100 @@
+job "caddy" {
+  region      = "global"
+  datacenters = ["samfelag"]
+  type        = "service"
+
+  group "caddy" {
+    count = 1
+
+    volume "caddyfile" {
+      type      = "host"
+      read_only = false
+      source    = "caddyfile"
+    }
+
+    volume "caddy-data" {
+      type      = "host"
+      read_only = false
+      source    = "caddy-data"
+    }
+
+    restart {
+      attempts = 2
+      interval = "2m"
+      delay    = "1m"
+      mode     = "fail"
+    }
+
+    network {
+      port "http" {
+        static       = 80
+        to           = 80
+	    host_network = "public"
+      }
+
+      port "https" {
+        static       = 443
+        to           = 443
+	    host_network = "public"
+      }
+
+      port "config" {
+        static = 2019
+        to     = 2019
+      }
+
+      dns {
+        servers = ["100.80.195.56"]
+      }
+    }
+
+    ###
+    # CADDY
+    ###
+
+    task "caddy" {
+      driver = "docker"
+
+      volume_mount {
+        volume      = "caddyfile"
+        destination = "/etc/caddy/Caddyfile"
+        read_only   = false
+      }
+
+      volume_mount {
+        volume      = "caddy-data"
+        destination = "/data"
+        read_only   = false
+      }
+
+      env {
+      }
+
+      config {
+        image = "caddy:2.3.0-alpine"
+        ports = ["http", "https", "config"]
+	    volumes = [
+          "/mnt/vatnajokull/lajuntament-web:/sites/lajuntament-web",
+          "/mnt/vatnajokull/folkugat-web:/sites/folkugat-web",
+        ]
+      }
+
+      resources {
+        cpu    = 500
+        memory = 128
+      }
+
+      service {
+        name = "caddy"
+       
+        check {
+          type     = "tcp"
+          port     = "http"
+          interval = "30s"
+          timeout  = "2s"
+        }
+      }
+    }
+  }
+}
+

data/nomad/dns.nomad

@@ -0,0 +1,112 @@
+job "dns" {
+  region      = "global"
+  datacenters = ["samfelag"]
+  type        = "service"
+
+  group "dns" {
+    count = 1
+
+    restart {
+      attempts = 10
+      delay    = "15s"
+    }
+
+    # VOLUMES
+    ## pihole
+
+    volume "pihole" {
+      type      = "host"
+      read_only = false
+      source    = "dns-pihole"
+    }
+
+    volume "dnsmasq" {
+      type      = "host"
+      read_only = false
+      source    = "dns-dnsmasq"
+    }
+
+    ## unbound
+
+    volume "unbound" {
+      type      = "host"
+      read_only = false
+      source    = "dns-unbound"
+    }
+
+    # NETWORK
+
+    network {
+      port "dns" {
+        static = 53
+      }
+      port "http" {
+        to = 80
+      }
+      port "unbound" {
+        static = 5533
+      }
+    }
+
+    # TASKS
+
+    task "pihole" {
+      driver = "docker"
+
+      volume_mount {
+        volume      = "pihole"
+        destination = "/etc/pihole"
+        read_only   = false
+      }
+
+      volume_mount {
+        volume      = "dnsmasq"
+        destination = "/etc/dnsmasq.d"
+        read_only   = false
+      }
+
+      env {
+        TZ          = "Europe/Amsterdam"
+        WEBPASSWORD = "elbonfeix"
+        ServerIP    = "100.80.195.56"
+      }
+
+      config {
+        image = "pihole/pihole:v5.7"
+        ports = ["dns", "http"]
+      }
+
+      resources {
+        cpu    = 100
+        memory = 32
+      }
+
+      service {
+        name = "pihole-gui"
+        port = "http"
+      }
+    }
+
+    task "unbound" {
+      driver = "docker"
+
+      volume_mount {
+        volume      = "unbound"
+        destination = "/opt/unbound/etc/unbound/"
+        read_only   = false
+      }
+
+      config {
+        image = "mvance/unbound:latest"
+        ports = ["unbound"]
+      }
+
+      resources {
+        cpu    = 50
+        memory = 32
+      }
+    }
+
+  }
+}
+

data/nomad/folkugat.nomad

@@ -0,0 +1,62 @@
+job "folkugat" {
+  region      = "global"
+  datacenters = ["samfelag"]
+  type        = "service"
+
+  group "folkugat" {
+    count = 1
+
+    restart {
+      attempts = 5
+      delay    = "15s"
+    }
+
+    network {
+      port "http" {
+        to = 80
+      }
+    }
+
+    # Volumes
+
+    volume "folkugat" {
+      type      = "host"
+      read_only = false
+      source    = "folkugat"
+    }
+
+    # FOLKUGAT WEB
+    task "folkugat" {
+      driver = "docker"
+
+      env {
+          JWT_SECRET = "12345"
+          ADMIN_PASSWORD = "banshee"
+          URL_SCHEME = "https"
+          DB_DIR = "/folkugat/db"
+      }
+
+      config {
+        image = "marc.sastre.cat/folkugat-web:latest"
+        ports = ["http"]
+      }
+
+      volume_mount {
+        volume      = "folkugat"
+        destination = "/folkugat/db"
+        read_only   = false
+      }
+
+      resources {
+        cpu    = 100
+        memory = 512
+      }
+
+      service {
+        name = "folkugat"
+        port = "http"
+      }
+    }
+  }
+}
+

data/nomad/gitea.nomad

@@ -0,0 +1,71 @@
+job "gitea" {
+  region      = "global"
+  datacenters = ["samfelag"]
+  type        = "service"
+
+  group "gitea" {
+    count = 1
+
+    restart {
+      attempts = 5
+      delay    = "1m"
+    }
+
+    network {
+      port "http" {
+        to     = 3000
+      }
+      port "ssh" {
+        static       = 2222
+        to           = 22
+	    host_network = "public"
+      }
+    }
+
+    task "gitea" {
+      driver = "docker"
+
+      env {
+        USER_UID   = "1001"
+        USER_GID   = "1001"
+      }
+
+      config {
+        image = "gitea/gitea:latest"
+        ports = ["http", "ssh"]
+	    volumes = ["/mnt/vatnajokull/nomad_volumes/gitea/data:/data"]
+      }
+
+      resources {
+        cpu    = 1000
+        memory = 400
+      }
+
+      service {
+        name = "gitea"
+        port = "http"
+       
+        check {
+          type     = "tcp"
+          port     = "http"
+          interval = "30s"
+          timeout  = "2s"
+        }
+      }
+
+      service {
+        name = "gitea-ssh"
+        port = "ssh"
+
+        check {
+          type     = "tcp"
+          port     = "ssh"
+          interval = "30s"
+          timeout  = "2s"
+        }
+      }
+
+    }
+  }
+}
+

data/nomad/nextcloud.nomad

@@ -0,0 +1,188 @@
+job "nextcloud" {
+  region      = "global"
+  datacenters = ["samfelag"]
+  type        = "service"
+
+  group "nextcloud" {
+    count = 1
+
+    restart {
+      attempts = 5
+      delay    = "1m"
+    }
+
+    # Network
+
+    network {
+      port "nextcloud" {
+        static = 8080
+        to     = 80
+      }
+      port "mariadb" {
+        static = 3306
+        to     = 3306
+      }
+      # port "collabora" {
+      #   to     = 9980
+      # }
+    }
+
+    # Volumes
+
+    volume "nextcloud" {
+      type      = "host"
+      read_only = false
+      source    = "nextcloud"
+    }
+
+    volume "mariadb" {
+      type      = "host"
+      read_only = false
+      source    = "mariadb"
+    }
+
+    # volume "collabora" {
+    #   type      = "host"
+    #   read_only = false
+    #   source    = "collabora"
+    # }
+
+    ###
+    # NEXTCLOUD
+    ###
+
+    task "nextcloud" {
+      driver = "docker"
+
+      user = 1001
+
+      env {
+        MYSQL_PASSWORD            = "hxKOD13MUh"
+        MYSQL_DATABASE            = "nextcloud"
+        MYSQL_USER                = "nextcloud"
+        MYSQL_HOST                = "${NOMAD_ADDR_mariadb}"
+        NEXTCLOUD_TRUSTED_DOMAINS = "nextcloud.samfelag.xyz"
+        OVERWRITEPROTOCOL         = "https"
+      }
+
+      volume_mount {
+        volume      = "nextcloud"
+        destination = "/var/www/html"
+        read_only   = false
+      }
+
+      config {
+        image = "nextcloud:latest"
+        ports = ["nextcloud"]
+      }
+
+      resources {
+        cpu    = 2000
+        memory = 512
+      }
+
+      service {
+        name = "nextcloud"
+        port = "nextcloud"
+       
+        check {
+          type     = "tcp"
+          port     = "nextcloud"
+          interval = "30s"
+          timeout  = "2s"
+        }
+      }
+    }
+
+    ###
+    # MARIADB
+    ###
+
+    task "mariadb" {
+      driver = "docker"
+
+      user = 1001
+
+      env {
+        MYSQL_ROOT_PASSWORD = "hxKOD13MUh"
+        MYSQL_ROOT_HOST     = "${NOMAD_IP_mariadb}"
+        MYSQL_PASSWORD      = "hxKOD13MUh"
+        MYSQL_DATABASE      = "nextcloud"
+        MYSQL_USER          = "nextcloud"
+      }
+
+      volume_mount {
+        volume      = "mariadb"
+        destination = "/var/lib/mysql"
+        read_only   = false
+      }
+
+      config {
+        image = "mariadb:10.5"
+        ports = ["mariadb"]
+      }
+
+      resources {
+        cpu    = 1000
+        memory = 256
+      }
+
+      service {
+        name = "mariadb"
+        tags = ["mariadb"]
+
+        port = "mariadb"
+
+        check {
+          type     = "tcp"
+          port     = "mariadb"
+          interval = "30s"
+          timeout  = "2s"
+        }
+      }
+    }
+
+    ###
+    # COLLABORA
+    ###
+
+    # task "collabora" {
+    #   driver = "docker"
+
+    #   env {
+    #       aliasgroup1 	= "https://nextcloud.lajuntament.space:443"
+    #       username  	= "lajuntament"
+    #       password  	= "eLn1lIm4rc"
+    #   }
+
+    #   volume_mount {
+    #     volume      = "collabora"
+    #     destination = "/etc/loolwsd"
+    #     read_only   = false
+    #   }
+
+    #   config {
+    #     image = "collabora/code:latest"
+    #     ports = ["collabora"]
+    #   }
+
+    #   resources {
+    #     cpu    = 2000
+    #     memory = 1024
+    #   }
+
+    #   service {
+    #     name = "collabora"
+    #     port = "collabora"
+
+    #     check {
+    #       type     = "tcp"
+    #       port     = "collabora"
+    #       interval = "30s"
+    #       timeout  = "2s"
+    #     }
+    #   }
+
+    # }
+  }
+}

data/nomad/old/collabora.nomad

@@ -0,0 +1,67 @@
+job "collabora" {
+  region      = "global"
+  datacenters = ["samfelag"]
+  type        = "service"
+
+  group "collabora" {
+    count = 1
+
+    restart {
+      attempts = 5
+      delay    = "1m"
+    }
+
+    network {
+      port "http" {
+        to     = 9980
+      }
+    }
+
+    volume "collabora" {
+      type      = "host"
+      read_only = false
+      source    = "collabora"
+    }
+
+    task "collabora" {
+      driver = "docker"
+
+      env {
+          domain    	= "nextcloud\\.lajuntament\\.space"
+          username  	= "lajuntament"
+          password  	= "eLn1lIm4rc"
+          extra_params	= "--o:ssl.enable=false"
+      }
+
+      volume_mount {
+        volume      = "collabora"
+        destination = "/etc/loolwsd"
+        read_only   = false
+      }
+
+      config {
+        image = "collabora/code:latest"
+        ports = ["http"]
+      }
+
+      resources {
+        cpu    = 1500
+        memory = 1024
+      }
+
+      service {
+        name = "collabora"
+        port = "http"
+       
+        check {
+          type     = "tcp"
+          port     = "http"
+          interval = "30s"
+          timeout  = "2s"
+        }
+      }
+
+    }
+  }
+}
+

data/nomad/old/cua-quinto.nomad

@@ -0,0 +1,46 @@
+job "cua-quinto" {
+  region      = "global"
+  datacenters = ["samfelag"]
+  type        = "service"
+
+  group "cua-quinto" {
+    count = 1
+
+    restart {
+      attempts = 5
+      delay    = "15s"
+    }
+
+    network {
+      port "http" {
+        to = 80
+      }
+    }
+
+    # CUA-QUINTO APP
+    task "cua-quinto" {
+      driver = "docker"
+
+      env {
+	      API_PREFIX = "/cua-quinto"
+	      API_SCHEME = "https"
+      }
+
+      config {
+        image = "marc.sastre.cat/quinto-cua:latest"
+        ports = ["http"]
+      }
+
+      resources {
+        cpu    = 50
+        memory = 64
+      }
+
+      service {
+        name = "cua-quinto"
+        port = "http"
+      }
+    }
+  }
+}
+

data/nomad/old/lwt.nomad

@@ -0,0 +1,106 @@
+job "lwt" {
+  region      = "global"
+  datacenters = ["samfelag"]
+  type        = "service"
+
+  group "lwt" {
+    count = 1
+
+    restart {
+      attempts = 10
+      delay    = "30s"
+    }
+
+    # VOLUMES
+
+    volume "lwt-mariadb" {
+      type      = "host"
+      read_only = false
+      source    = "lwt-mariadb"
+    }
+
+    volume "lwt" {
+      type      = "host"
+      read_only = false
+      source    = "lwt"
+    }
+
+    # NETWORK
+
+    network {
+      port "lwt" {
+        to = 80
+      }
+      port "mariadb" {
+        static = 33306
+        to = 3306
+      }
+    }
+
+    # TASKS
+
+    task "mariadb" {
+      driver = "docker"
+
+      user = 1001
+
+      volume_mount {
+        volume      = "lwt-mariadb"
+        destination = "/var/lib/mysql"
+        read_only   = false
+      }
+
+      env {
+        MYSQL_ALLOW_EMPTY_PASSWORD = "no"
+        MYSQL_ROOT_PASSWORD = "root"
+      }
+
+      config {
+        image = "mariadb:10.7"
+        ports = ["mariadb"]
+      }
+
+      resources {
+        cpu    = 100
+        memory = 128
+      }
+    }
+
+    task "lwt" {
+      driver = "docker"
+
+      config {
+        image = "ghcr.io/hugofara/lwt:master"
+        ports = ["lwt"]
+      }
+
+      volume_mount {
+        volume      = "lwt"
+        destination = "/var/www/html/media"
+        read_only   = false
+      }
+
+      env {
+        DB_HOST      = "${attr.unique.network.ip-address}:33306" # "100.91.225.117"
+      }
+
+      resources {
+        cpu    = 100
+        memory = 128
+      }
+
+      service {
+        name = "lwt"
+        port = "lwt"
+
+        check {
+          type     = "tcp"
+          port     = "lwt"
+          interval = "30s"
+          timeout  = "10s"
+        }
+      }
+    }
+
+  }
+}

data/nomad/old/minecraft.nomad

@@ -0,0 +1,71 @@
+job "minecraft" {
+  region      = "global"
+  datacenters = ["samfelag"]
+  type        = "service"
+
+  group "minecraft" {
+    count = 1
+
+    volume "minecraft" {
+      type      = "host"
+      read_only = false
+      source    = "minecraft"
+    }
+
+    restart {
+      attempts = 2
+      interval = "2m"
+      delay    = "1m"
+      mode     = "fail"
+    }
+
+    network {
+      port "server" {
+        static       = 25565
+        to           = 25565
+	host_network = "minecraft"
+      }
+    }
+
+    ###
+    # MINECRAFT SERVER
+    ###
+
+    task "minecraft" {
+      driver = "docker"
+
+      volume_mount {
+        volume      = "minecraft"
+        destination = "/data"
+        read_only   = false
+      }
+
+      env {
+        EULA = "TRUE"
+        TZ   = "Europe/Madrid"
+      }
+
+      config {
+        image = "itzg/minecraft-server"
+        ports = ["server"]
+      }
+
+      resources {
+        cpu    = 2800
+        memory = 1900
+      }
+
+      service {
+        name = "minecraft"
+       
+        check {
+          type     = "tcp"
+          port     = "server"
+          interval = "30s"
+          timeout  = "2s"
+        }
+      }
+    }
+  }
+}
+

data/nomad/old/moimoin.nomad

@@ -0,0 +1,133 @@
+job "moimoin" {
+  region      = "global"
+  datacenters = ["samfelag"]
+  type        = "service"
+
+  group "moimoin" {
+    count = 1
+
+    restart {
+      attempts = 10
+      delay    = "30s"
+    }
+
+    # VOLUMES
+
+    volume "mysql" {
+      type      = "host"
+      read_only = false
+      source    = "moimoin"
+    }
+
+    # NETWORK
+
+    network {
+      port "moimoin-front" {
+        to = 5000
+      }
+      port "moimoin-back" {
+        to = 3000
+      }
+      port "mysql" {
+        static = 33306
+        to = 3306
+      }
+    }
+
+    # TASKS
+
+    task "mysql" {
+      driver = "docker"
+
+      user = 1001
+
+      volume_mount {
+        volume      = "mysql"
+        destination = "/var/lib/mysql"
+        read_only   = false
+      }
+
+      env {
+        MYSQL_DATABASE = "xat-osr"
+        MYSQL_ROOT_PASSWORD = "estrell4galicia"
+      }
+
+      config {
+        image = "arm64v8/mysql:latest"
+        ports = ["mysql"]
+      }
+
+      resources {
+        cpu    = 500
+        memory = 512
+      }
+    }
+
+    task "moimoin-back" {
+      driver = "docker"
+
+      config {
+        image = "marc.sastre.cat/moimoin-back:latest"
+        ports = ["moimoin-back"]
+      }
+
+      env {
+        MYSQL_HOST      = "${attr.unique.network.ip-address}" # "100.91.225.117"
+        MYSQL_PORT      = "33306"
+        MYSQL_USER      = "root"
+        MYSQL_PASSWORD  = "estrell4galicia"
+        MYSQL_NAME      = "xat-osr"
+        CHAT_ADMIN_PSWD = "cervesaEspecial"
+        CLIENT_HOST     = "marc.sastre.cat/moimoin"
+      }
+
+      resources {
+        cpu    = 100
+        memory = 128
+      }
+
+      service {
+        name = "moimoin-back"
+        port = "moimoin-back"
+
+        check {
+          type     = "tcp"
+          port     = "moimoin-back"
+          interval = "30s"
+          timeout  = "10s"
+        }
+      }
+    }
+
+    task "moimoin-front" {
+      driver = "docker"
+
+      config {
+        image = "marc.sastre.cat/moimoin-front:latest"
+        ports = ["moimoin-front"]
+      }
+
+      env {
+        CLIENT_PORT = "5000"
+      }
+
+      resources {
+        cpu    = 100
+        memory = 128
+      }
+
+      service {
+        name = "moimoin-front"
+        port = "moimoin-front"
+
+        check {
+          type     = "tcp"
+          port     = "moimoin-front"
+          interval = "30s"
+          timeout  = "10s"
+        }
+      }
+    }
+
+  }
+}

data/nomad/old/organice.nomad

@@ -0,0 +1,52 @@
+job "organice" {
+  region      = "global"
+  datacenters = ["samfelag"]
+  type        = "service"
+
+  group "organice" {
+    count = 1
+
+    restart {
+      attempts = 5
+      delay    = "1m"
+    }
+
+    network {
+      port "http" {
+        to     = 5000
+      }
+    }
+
+    task "organice" {
+      driver = "docker"
+
+      env {
+        ORGANICE_WEBDAV_URL = "https://nextcloud.lajuntament.space/remote.php/dav/files/marc/"
+      }
+
+      config {
+        image = "twohundredok/organice:latest"
+        ports = ["http"]
+      }
+
+      resources {
+        cpu    = 100
+        memory = 128
+      }
+
+      service {
+        name = "organice"
+        port = "http"
+       
+        check {
+          type     = "tcp"
+          port     = "http"
+          interval = "30s"
+          timeout  = "2s"
+        }
+      }
+
+    }
+  }
+}
+

data/nomad/old/pasta.nomad

@@ -0,0 +1,70 @@
+job "pasta" {
+  region      = "global"
+  datacenters = ["samfelag"]
+  type        = "service"
+
+  group "pasta" {
+    count = 1
+
+    restart {
+      attempts = 5
+      delay    = "15s"
+    }
+
+    network {
+      port "backend" {
+        to = 3000
+      }
+      port "client" {
+        to = 80
+      }
+    }
+
+    # PASTA SERVER
+    task "pasta-server" {
+      driver = "docker"
+
+      env {
+        PASTA_PORT = "3000"
+        PASTA_DIR  = "/pasta"
+      }
+
+      config {
+        image = "marc.sastre.cat/pasta-server"
+        ports = ["backend"]
+	    volumes = ["/mnt/vatnajokull/nomad_volumes/pasta:/pasta"]
+      }
+
+      resources {
+        cpu    = 100
+        memory = 256
+      }
+
+      service {
+        name = "pasta-server"
+        port = "backend"
+      }
+    }
+
+    # PASTA CLIENT
+    task "pasta-client" {
+      driver = "docker"
+
+      config {
+        image = "marc.sastre.cat/pasta-client"
+        ports = ["client"]
+      }
+
+      resources {
+        cpu    = 50
+        memory = 32
+      }
+
+      service {
+        name = "pasta-client"
+        port = "client"
+      }
+    }
+  }
+}
+

data/nomad/old/pihole.nomad

@@ -0,0 +1,73 @@
+job "pihole" {
+  region      = "global"
+  datacenters = ["samfelag"]
+  type        = "service"
+
+  group "pihole" {
+    count = 1
+
+    volume "pihole" {
+      type      = "host"
+      read_only = false
+      source    = "dns-pihole"
+    }
+
+    volume "dnsmasq" {
+      type      = "host"
+      read_only = false
+      source    = "dns-dnsmasq"
+    }
+
+    restart {
+      attempts = 5
+      delay    = "15s"
+    }
+
+    network {
+      port "dns" {
+        static = 53
+      }
+      port "http" {
+        to = 80
+      }
+    }
+
+    task "pihole" {
+      driver = "docker"
+
+      volume_mount {
+        volume      = "pihole"
+        destination = "/etc/pihole"
+        read_only   = false
+      }
+
+      volume_mount {
+        volume      = "dnsmasq"
+        destination = "/etc/dnsmasq.d"
+        read_only   = false
+      }
+
+      env {
+        TZ          = "Europe/Amsterdam"
+        WEBPASSWORD = "elbonfeix"
+        ServerIP    = "100.107.148.47"
+      }
+
+      config {
+        image = "pihole/pihole:v5.7"
+        ports = ["dns", "http"]
+      }
+
+      resources {
+        cpu    = 100
+        memory = 64
+      }
+
+      service {
+        name = "pihole-gui"
+        port = "http"
+      }
+    }
+  }
+}
+

data/nomad/old/presencia.nomad

@@ -0,0 +1,41 @@
+job "presencia" {
+  region      = "global"
+  datacenters = ["samfelag"]
+  type        = "service"
+
+  group "presencia" {
+    count = 1
+
+    restart {
+      attempts = 5
+      delay    = "15s"
+    }
+
+    network {
+      port "http" {
+        to = 5000
+      }
+    }
+
+    # PRESENCIA APP
+    task "presencia" {
+      driver = "docker"
+
+      config {
+        image = "marc.sastre.cat/presencia"
+        ports = ["http"]
+      }
+
+      resources {
+        cpu    = 50
+        memory = 64
+      }
+
+      service {
+        name = "presencia"
+        port = "http"
+      }
+    }
+  }
+}
+

data/nomad/old/unbound.nomad

@@ -0,0 +1,47 @@
+job "unbound" {
+  region      = "global"
+  datacenters = ["samfelag"]
+  type        = "service"
+
+  group "unbound" {
+    count = 1
+
+    volume "unbound" {
+      type      = "host"
+      read_only = false
+      source    = "dns-unbound"
+    }
+
+    restart {
+      attempts = 5
+      delay    = "15s"
+    }
+
+    network {
+      port "dns" {
+        static = 5533
+      }
+    }
+
+    task "unbound" {
+      driver = "docker"
+
+      volume_mount {
+        volume      = "unbound"
+        destination = "/opt/unbound/etc/unbound/"
+        read_only   = false
+      }
+
+      config {
+        image = "mvance/unbound:latest"
+        ports = ["dns"]
+      }
+
+      resources {
+        cpu    = 50
+        memory = 64
+      }
+    }
+  }
+}
+

data/nomad/old/webhooks.nomad

@@ -0,0 +1,52 @@
+job "webhooks" {
+  region      = "global"
+  datacenters = ["samfelag"]
+  type        = "service"
+
+  group "webhooks" {
+    count = 1
+
+    restart {
+      attempts = 5
+      delay    = "1m"
+    }
+
+    network {
+      port "http" {
+        to     = 6000
+      }
+    }
+
+    task "webhooks" {
+      driver = "docker"
+
+      env {
+          CONFIG_FILE = "/app/data/config.json"
+      }
+
+      config {
+        image = "marc.sastre.cat/webhooks:latest"
+        ports = ["http"]
+	    volumes = ["/mnt/vatnajokull/nomad_volumes/webhooks:/app/data"]
+      }
+
+      resources {
+        cpu    = 100
+        memory = 128
+      }
+
+      service {
+        name = "webhooks"
+        port = "http"
+
+        check {
+          type     = "tcp"
+          port     = "http"
+          interval = "30s"
+          timeout  = "2s"
+        }
+      }
+    }
+  }
+}
+

data/nomad/registry.nomad

@@ -0,0 +1,52 @@
+job "registry" {
+  region      = "global"
+  datacenters = ["samfelag"]
+  type        = "service"
+
+  group "registry" {
+    count = 1
+
+    restart {
+      attempts = 5
+      delay    = "1m"
+    }
+
+    network {
+      port "http" {
+        to     = 5000
+      }
+    }
+
+    task "registry" {
+      driver = "docker"
+
+      env {
+	      REGISTRY_STORAGE_FILESYSTEM_ROOTDIRECTORY = "/data"
+      }
+
+      config {
+        image = "registry:2"
+        ports = ["http"]
+	    volumes = ["/mnt/vatnajokull/nomad_volumes/registry:/data"]
+      }
+
+      resources {
+        cpu    = 100
+        memory = 256
+      }
+
+      service {
+        name = "registry"
+        port = "http"
+
+        check {
+          type     = "tcp"
+          port     = "http"
+          interval = "30s"
+          timeout  = "2s"
+        }
+      }
+    }
+  }
+}
+